Recently Browsing 0 members
No registered users viewing this page.
Pathfinder Red Dragon #60028 is a hefty beastie and I definitely did not paint him red. Instead I tried a rainbow piece for Pride 2020 (finished 8/1/2020). Also my first painted model posted here. Pardon my photography skills. I used cut up Caryatid column #77378 for a bit of terrain on the base. My biggest metal model to date.
In my continuing effort to continue at least 1 dragon a month, here is my next entry, the wizkids gargantuan dragon. I believe I should name this one PanicusMaximusNecakus because this one presented special and exciting problems because the dragon has apparently decided to do the flamenco feather dance and his wings were a major obstacle when trying to paint the left side of the dragon's body. I realize the cause was because they were trying to get the dragon in the box but man was that difficult to work with.
I wound up spending a lot of time with one hand pinning the dragon and the wing to the table while I painted with the other. It was not the most convenient method of painting. He was also very prickly... very, very prickly!
because its such a big base, I wanted to provide some interest for the game. I used the old road stamp from Basius to generate some pieces of broken road amongst a clearing in early fall. I was thinking of adding a smudge of snow but if I did it would conflict with the ruined stone.
Overall though I like how he came out and I really like the results on his tail and his crown of horns.
Hope everyone like him. This is still tabletop quality as I have been trying to produce quantity over quality.
Today's mini is a blast from the past, Reaper's casting of the Heritage Red Dragon.
Because of his seemingly furry chest/stomach, he is called the hippie dragon.
He is one of many miniature purchases from the old Lone Star Comics. I raided the store for weird miniatures. The had a lot of bagged Reaper minis for sale.
By Dan S
Dan's Build Journal #4
The Ranger's Camp
Latest WIP pics:
My Other Build Journals:
Well its been almost two weeks since I finished my last project, and that itch start a new build has flared up again. This time I am going to attempt some type of Ranger/Woodsman's Camp, which compared to my last couple of projects should be quite a straight forward and relatively simple build.
Laying the Foundation.
To build the foundation of this project, I cut out a piece of XPS foam to serve as the base and then used blocks of polystyrene which I'd cut with a hot wire tool to form the very basic shape and contours of the landscape. I want give to the illusion that the camp is quite secluded and well hidden and so it is going to be set up in a small clearing at the base of a wooded hill. I'm going to build the hill so that it sweeps around the camp, shielding it from three sides.
During my recent Ruined Keep build, I'd started working on an LED campfire, but got cold feet and ended up abandoning the idea scared that I'd mess up and spoil the project. This time I am going to go for it. I removed the outer casing from a cheap flickering LED tealight, cut a small hole in the XPS foam base, and then hot glued the tealight into the hole so that only the LED was protruding above the surface. I'll come back to this at a later stage.
The next stage was to get nice and messy with some Sculptamold, which I used to reshape the contours of the hill into something a little more organic and natural looking. I also added several plaster of paris rocks that I had left over from a previous project to add a bit of visual interest. The rocks were originally created using Woodland Scenic's Rock Moulds.
The Sculptamold is applied quite thickly in places, and so it may need an extra day to fully dry. In the mean time I have a bunch of accessories to paint up and prepare, including a woodsman's lean-to, a roasting spit and a sitting log which I will likely start work on over the weekend.
I saw this ad in Fantasy Modeling #5 back around '80 or '81 and immediately sent off for the Dragontooth catalog, and promptly bought the dragon. I think it cost something like $20, if you factor in the shipping. I knew when the box containing him arrived, because I think the box must have weighed twenty pounds.
He was about the size of my hand, five and a half inches from tabletop to wing tip, and weighed approximately fifty pounds. Solid lead. Eight parts; Two wings, torso, four legs, and the top of his head and upper jaw. Wings would NOT stay on with crazy glue, epoxy, solder, or Sovereign Glue.
My players must have fought that dragon three or four times in the three years we existed as a gaming group before we all went off to college and scattered to the four winds. One of the boys named him Skippy. As in, "Dragon? Oh, man, Skippy's gonna hit the table!"
There weren't a whole lot of dragons back then. Toy dragons may have existed, but we didn't have any clue where to find one. And metal dragons had begun to exist, but I lived in a little tiny Texas cow town in the middle of nowhere. For us, there was Skippy, and we loved him well.
So naturally, he was among the things my parents tossed out when I left for college. I have never seen another Dragontooth dragon like him. He was seventy pounds of solid lead, and probably illegal to sell, these days, but I'd buy another one in a minute.
This is my newest dragon. Arrived today. He's pretty, and I hear they have him at Wal Mart, now. He and his box of friends cost fifteen bucks.
And back in 1980, I'd have flapped my arms and flown to the moon by sheer force of personality if I thought it would have got me a dragon like this.
But then.... today... you can find dragons anywhere. I think Reaper makes one or two different dragons, don't they......?
Who was YOUR first dragon?
Who's Online 14 Members, 1 Anonymous, 39 Guests (See full list)