Recently Browsing 0 members
No registered users viewing this page.
Since I like painting when it is dark outside I normally don't take photos, to combat this and get into the habit I am starting this thread. I will post some of my recent work, including things that are 95% done and are only missing a base. Some of the photos may not be the best, but they should suffice.
Any advice and criticism is welcome.
So let us get started:
An old Pandora Metal starter set from Malifaux (and some Victoria Miniatures):
The skin for the baby was done using Mars Violet (PR101), Nickel Titanate Yellow (PY53) and Titanium White (PW6). I may have also used Titanium Buff (PW6:1)
The litle girl is sculpted with a basket full of candy, but since she is holding some scissors I decided to make it arts and crafts materials and a mirror. I went for a Black, Red and White colour scheme do to the spade on her shirt which reminded me of cards.
The black is painted using Titanium White and Perylene Black (PBk31, which is green-ish in glazes and when tinted with white), I also decided against priming the figure and used the metalic to my advantage by glazing the Perylene over it.
The redish colour is created by mixing some Quinacridone Magenta(PR122) with Red Iron Oxide(PR101).
The mirror was done with Prussian Blue (PB27, I just love how it behaves. Only one of the manufacterurs, Matise, that I can get locally sells it in acrylics due to the the pigment chemicaly reacting with the acrylic binders), and Titanium White.
The white cloth was done using Titanium White, Nickel Titanate Yellow and some Burnt Umber (PBr7).
Skin and wood is a mixture of Red Iron Oxide, Burnt Umber, Nickel Titanate Yellow and Titanium White/Buff.
Vampire sending little girl to collect blood with those scissors:
As you can see she is tiny.
Some Reaper Bones, mostly from Bones 4:
Comments on them:
- The monk and scribe were fun to paint.
- The death statue was so nice I decided to make it a summon instead, with otherworldy energy showing throught the cracks.
- The old lady with a cane had her dress done by glazzing colours (ohh look I could make it behaved similar to contrast paints for a litteral fraction of the cost. AU$10 for 60mL of paint + AU$20 for 237mL of glaze medium + some dish soap/flow improver, wonder how many cidatel pots I can make with that especially with the contrast costing about $AU12 per 30mL pot)
- The pillar has some meted bodies flondering in pain, fun to paint.
- The Red/Black lady is some Pyrole Red (PR254) + Cerulean Blue(PB35) , and Perylene Black + Titanium White, the skin is made of Mars Violet and Titanium White. Similar to the vampire lord with little girl.
- Fish lady has a pipe in her hat.
Some minor conversion
My dreadmare herbalist arrived without the cylinder, I personally didn't really like that design choice so I decided not to ask for a replacement. Instead I was going to do some "magic".
First the gap was filled with some green stuff. This involved resculpting some of the satchel on her frock, the sides of her frock, some skirt and the bag strap.
Then I painted the dress and blocked in some of the colours.
Dress: Ultramarien Blue (PB29) + Titanium White
Frock and shoes: Raw Umber(PBr7), Titanium White and Yellow Ochre(PY43)
Bag, hedgehogs and hair: Raw Umber .
After a working on and of on her she is mostly finished:
The bag recieved a glaze of Quinacridone Violet (PV19) after it was highlighted with Titanium White + Yellow Ochre +Raw Umber.
Greens are Ultramarine Blue mixed with different yellows, the minty green is made by Ultramarine Blue and Nickel Titanate Yellow.
Red is some Red Iron Oxide and Cadmium Red Medium (PR108).
You may be able to see the eyes and nose of the hedgehogs.
Perylene Black was used for the metalics.
I tried to give her some freckles, they look good from the front but I am not sure if I am to happy with one of the side looks.
The flower was Nickle Titanate Yellow + Titanium White glazed with Indian Yellow (PY139).
Practice With FreeHand
I did some freehand practice on the Bones 4 milkmaid:
This was achieved by first drawing a square with some diluted Perylene Black and then convering everthing inside and oustide it with thin layers of titanium white.
The forest was first drawn by just when blending some Prussian Blue, Titanium white and a yellow. The Perylene Black may also have been used.
The mountain was draw with some Prussian Blue and white, this was grayed with some orangy colour which I can't remember. A lighters glaze was used on the sky. Luckily this blended with the snow covered top of the mountain so I outlined the mountain with the same orange I used to gray the prussian. Then I glazed some Indian Yellow up from the mountain. This created an effect that I really enjoyed (didn't really make vissible green due to the sky being a greyed blue). The top of the dress looked a little empry so I painted a titanium white cloud that had a shadow of the deep grayed prussain at the top and a reflection of the orange at the bottom.
The freehand is the centre piece so I did not want to detract from it with the rest of the paint job.
To do this I made the dress a desaturated green, but found it to be to empty by itself.
To make it pop a little more I drew a patern on it by mixing the dress colour with a lot of Titanium White and then diluting that with some flow improve and lots of water. Then I sketched the lines with the highly translucent mixture. To further highlighty the stripes which were lost in the folds of the dress (bad locaiton choice on the vertical stripes) I decided to make a higher Titanium White mixture that had less water and dot that in each line intercept.
Now the model is drying (mostly finished) and if the weather permits I will have some nice pictures "Soon".
Such characterful miniatures they produce, I will probably spurge for some more on my birthday.
1st Picture: Some duelists. One of them is so secure in his victory he is holding his folded cloak in one hand, or is he hidding something there?
2nd Picutre: An older lady feeding some chickens, currently missing chickens.
3rd Picture: has some muscians, I did not take a close up of all of them. They each have their own chairs and sheet music. There are 4 dogs, 2 of them are holding buckets with something in them. 2 chickens, a rooster and 2 chicks
4th-6th Pictures: musician closeups.
7th Picture: That lady behind the cow did something so scandalous that the lady further back started chocking, requiring her friend to help. Otherways is just 2 milkmaids, one milking a cow and there is a really curious auroch bull looking at the bucket.
8th Picture: I am not sure if blowing a seashell horn into the ear of a person is a bright idea, especially if they are dressed like that and holding a scepter staff while you only have a loincloth. The scepter is quiet heavy and a nice weapon, just a warning.
Churning some Butter
One of the Eureka Miniatures is this boy, he is not that small but still recognisable as a child (goes up to around the shoulder of adult miniatures, so if we take into acount the base of the vampire lord he is only up to underneath his arm.)
The chemise is painted using some glazes of Transparent Red Oxide (PR101) and Burnt Umber over a base coat of Titanium White and Yellow Ochre. Everything but the close and hair has a basecoat of Burnt Umber.
The shirt is some greyed out (I think I used Transparent Red Oxide in this case) Ultramarine Blue and Titanium White.
The trouses are Nickle Titanate Yellow, Ultramarine Blue and some Titanium White (they may have been greyed out a little with Transparen Red Oxide). The trim of his trouses is Mars Violet with some Titanium White.
Now this old lady is telling us to get off her lawn, so I brightened up her day by splattering her pinkish dress with some dots.
The pink was made out of Cadmium Red Medium and Titanium White. This mixture was further lightened out with Titanium White to make the dots (lots of water with flow aid used to make them nice an easy to paint).
The lady was still grumpy so maybe she did not like those dots? Too late for her then since htey are staying, instead lets give her some stripes.
Her under-dress was painted a dark green (forgot the mixture, it may have involved some Ivory Black (PBk9) and Green Gold(PY129)) and the stripes were painted using some Nickle Titanate Yellow, Titanium White and the green mixture. To make them stand out more the shadows were glazed with some Perylene Black (I think it was that).
Some Burnt Umber, Yellow Ochre, Nickle Titanate Yellow and Titanium White were used to paint the wood,shoes and headscarf.
Her hair was painted using Perylene/Ivory Black and Titanium White.
Now this is not the best pictures, the hair looks washed out (it has far deeper shadows than what is seen here). The hair for left and middle is Raw Umber, Yellow Ochre and Titanium white mixtures. The metalics were some Vallejo Liquid Metal "writing rubbed out" Gold. Either old gold or red gold, but sadly my bottle has the name of the colour rubbed out.
The right lady, had her dress painted by first making a grisalis of Titanium White and Ivory Black, this was then glazed with Pthalo Blue (PB15:3).
Her yellow decoration where painted using Nickle Titanate Yellow and Titanium White glazed with Indian Yellow.
Inner Dress was a mmixture of Prussian Blue and either some Nickle Titanate Yellow or Titanium Buff.
Hair were washes/glazes of Transparent Red Oxide, Indian Yellow and Burnt Umber.
The book has some squigles that you can see in real life, but didn't come out in the picture.
The middle lady has a dress of Hanza Yellow Light (PY3) and Pthalo Green (PG 7) which I think is the blue shade.
I can't remember her inner dress.
The leftmost lady is painted using OILS, it took her a while to dry, but I just love how using Prussian Blue and then wiping the top came out for her dress. The inner dress is painted with Green Gold. Her scepter handle is some Quinacridone Magenta and white.
Some of my slowly "Speed" painted Handgunners
I spent about 10-20 minutes on the skin of each figure and then left them bare. Over the course of the last month when I finished doing some painting and had some colour left I would take one of the figure and start blocking in a section of their attire, all sections, but the skin, are highlighted with Colour used+ Titanium White. Overall I would Say that each figure took me about 30-60 minutes of paint time. There are still 2 models left (double of each sculpt).
1:72 scale Freehand
This guy is about the same hight as the butter churning boy, except he is a lot thinner (somewhat realistic proportions), I allready finished painting him. Sadly I don't have a photo of him right now, so the onnly thing I can show you is that I painted stripes on his throuses. The throuses and cape are Cerulean Blue and Titaniym White, The stripes are heavily diluted Perylene Black.
I picked this figure because I like it but don't have strong attachment to it. The face turned out a bit mushy, but eh, s'ok. OSL was a "hmm, it should be there". Skin tones are Reaper vampiric and dusky triads. Most of the rest of the figure is with Kimera Kolors which are crazy heavy pigments; this figure was an experiment in learning how to use them.
Photo is... so so. Didn't have ability to set up proper station so this'll have to do for now.
I haven't posted here much, as I lost painting last year to depression. But I have made great strides, both in battling the mind disease and in painting!
It's not Reaper, but I wanted to show off these Malifaux Gremlins because I am so proud of them.
I look forward to posting more here as I paint. I have a whole shelf of Reaper minis in my backlog!
- Magic Brew
I started painting these three pieces after having them in the wings for awhile:
The Scarecrow & her Minion are Bombshell Babe minis, the Witch is a Ral Parhta/Iron Wind, the Voodoo Guy is a Wyrd, & the Pumpkinhead is mine:
Hopefully they will progress without further delay/interruption...unlikely as that is.
Who's Online 35 Members, 1 Anonymous, 154 Guests (See full list)
- Paradoxical Mouse
- Doug Sundseth
- Jordan Peacock
- Disciple of Sakura
- Xiwo Xerase
- Grumpy Cave Bear