Jump to content
  • Optionally enter a message with your report.

    ×   Pasted as rich text.   Restore formatting

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MoonglowMinis
      So i've got that trio of spiders from nolzur's.
       

       
      They do not come with sculpted bases - unlike most of the nolzur's line.  This isn't a huge issue, except that these suckers have a bunch of tiny spindly legs.  I am worried about getting a good hold.
       
      So I have a few questions:
       
      1: how to fasten these guys to a base?  Just glue the legs and hope, or pin them through the body like a flightstand?
      2: how to sculpt/or assemble, suitable bases to compliment their spindly nature and ensure a better hold.
      3: how to attach the spider in a way that I can paint underneath it OR should I find a way to glue it down after both parts are painted?
       
      So the webbed victim shown in the photo above I have decided to leave out as a piece of scatter.  There is a stone base (not pictured) that I have already glued to a reaper base for one of the spiders.  Each of the spiders has a slightly different pose with their legs - which is made worse by them being bent out of shape.  I'm hoping to use this as an advantage though, and pose each spider differently.  One is rearing back with front legs up (this one I plan to glue to the supplied rocky base with the abdomen glued to the ground for extra support.
       
      Another spider has one side of legs kind of bent under a bit.  I'm thinking this would look good mounted sideways, crawling up the side of a fallen log (not sure if I should try to sculpt this, or find a twig to glue to the base).
       
      The last spider is pretty neutral, but I was thinking of posing it climbing down something just for variety.
       
      Any advice about sculpting the bases vs gluing organic material or mounting something with narrow points of contact would be tremendously helpful.  My indecision has lead to two weeks of no painting.
    • By knarthex
      So at Reapercon 2018, I scored the Duskwarden poster of Thregan Helmsplitter for my work at the auction, and of course, being the Duskwarden*, I have a couple of the minis as well.
         
       
      So I was thinking of using him as my next PC, but as I have hair, I wanted my mini to also...
      While working on another project with GS, as usual, I made to much, and decided to bite the bullet and do his hair...
      What do you think?




      Comments appreciated!
       
      George
       
      *
      Doesn't Jacob Knochengard look like me???
    • By BLZeebub
      Couple reaper samurai I used for a commissioned diorama.  Rock is pine bark, tree is a wire armiture covered with plumber's epoxy putty and paper towel and super glue (for the skinnier parts), foliage is bleached, dyed, and preserved reindeer moss.



    • By Rat13
      Having just started a 45 figure batch paint of guardsmen, I decided a side project may be in order. Just a little something I could fiddle with off and on to disrupt the monotony and I knew just the project. 
       
      About a year ago, after I finished my first commissar,  I thought it would be a good idea to paint all my commissars differently. That way I could tell all of my HQs or elites apart, but wouldn't you know it after a couple games I realized it was completely unnecessary. Having already started down that path however I decided to press on.
       
      Within about the first week of pondering different color schemes I had a great idea. Unfortunately I lacked the skills and hobby confidence to attempt it. This past year I've managed to learn quite a bit though, especially about sculpting/working with greenstuff. So I think it's time to attempt a Hulk Hogan commissar.
      First up was locating a good reference photo for both his moustache and boa (see above).
       
      As the moustache was the trickier of the two I decided to start there. In a twist of fate getting a good texture was the easy part, but getting the proper size wasn't. After some back and forth I finally got the size correct. Then it was just a simple matter of using a pin and a toothpick to achieve a hair like texture. 
      This is what you get zooming in, but at a regular viewing distance I think it looks good. 
       
      Next came the boa. Try as I might I couldn't get a good feathery texture going. I could get a good amorphous blob/coral like texture though. Much like the moustache it'll fail upon close inspection but I think with a good paintjob it'll hold up just fine.  

      See I told you that moustache is passable with some distance.

      Now it's just a matter of letting everything dry before priming. I guess it's a good thing we have holiday commitments for the next couple days.
       
      As with any greenstuff project you always end up with some leftovers. After adding a skull to the Hulkster's base I thought I'd share the wealth with a few random models from my desk.

    • By rintintin
      HI, 
      Thought I would create my own topic so I can share the models I create. Crits and comments welcome.
      This is my latest mini. Created just for fun. I think it should be called " The summoning" though I am open to ideas :)



      Got a few pictures of the 3d print of this guy. Not the best photos but you get the idea.



  • Who's Online   8 Members, 1 Anonymous, 33 Guests (See full list)

×
×
  • Create New...