Jump to content

Recommended Posts

Really cool, I have had it in the back of my mine to get more into sculpting. 

 

Question for you; what is the Vaseline for?

  • Like 1

Share this post


Link to post
Share on other sites

Doh!  I knew I forgot something!  The vaseline keeps the tool from sticking to the greenstuff.  I'll usually put a bit on the back of my hand and periodically coat the tool surface with it.

  • Like 7

Share this post


Link to post
Share on other sites

Doh!  I knew I forgot something!  The vaseline keeps the tool from sticking to the greenstuff.  I'll usually put a bit on the back of my hand and periodically coat the tool surface with it.

THANK YOU, I am working on some fire pits for D&D using only water and it still doesn't seem to help. I just have water all over my glass desk AHH!!

 

Corporea my hero!

  • Like 3

Share this post


Link to post
Share on other sites

Wow, I got a plug! ::D:

 

Excellent tutorial, Erin.  I'm also glad you like the tool.

 

Vaseline:  I use it for all my lubrication.  Get a little on your fingers when mixing the putty too to mix it in a bit, that will allow it to stick to cured putty with Vaseline on it.  Also, make sure you thoroughly de-grease the sculpt with something like dish soap or Simple Green before priming and painting or the paint won't stick.

 

Andy

  • Like 8

Share this post


Link to post
Share on other sites

 I really need to start practicing my leaves more... For all the damn trees, branches and stumps I do, I never seem to get around to putting leaves on them...

 

 (Y'know, maybe I'll put some plants on the base of the wall I'm doing for the Box o' Goodwill...)

Edited by Mad Jack
  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By knarthex
      So at Reapercon 2018, I scored the Duskwarden poster of Thregan Helmsplitter for my work at the auction, and of course, being the Duskwarden*, I have a couple of the minis as well.
         
       
      So I was thinking of using him as my next PC, but as I have hair, I wanted my mini to also...
      While working on another project with GS, as usual, I made to much, and decided to bite the bullet and do his hair...
      What do you think?




      Comments appreciated!
       
      George
       
      *
      Doesn't Jacob Knochengard look like me???
    • By BLZeebub
      Couple reaper samurai I used for a commissioned diorama.  Rock is pine bark, tree is a wire armiture covered with plumber's epoxy putty and paper towel and super glue (for the skinnier parts), foliage is bleached, dyed, and preserved reindeer moss.



    • By Rat13
      Having just started a 45 figure batch paint of guardsmen, I decided a side project may be in order. Just a little something I could fiddle with off and on to disrupt the monotony and I knew just the project. 
       
      About a year ago, after I finished my first commissar,  I thought it would be a good idea to paint all my commissars differently. That way I could tell all of my HQs or elites apart, but wouldn't you know it after a couple games I realized it was completely unnecessary. Having already started down that path however I decided to press on.
       
      Within about the first week of pondering different color schemes I had a great idea. Unfortunately I lacked the skills and hobby confidence to attempt it. This past year I've managed to learn quite a bit though, especially about sculpting/working with greenstuff. So I think it's time to attempt a Hulk Hogan commissar.
      First up was locating a good reference photo for both his moustache and boa (see above).
       
      As the moustache was the trickier of the two I decided to start there. In a twist of fate getting a good texture was the easy part, but getting the proper size wasn't. After some back and forth I finally got the size correct. Then it was just a simple matter of using a pin and a toothpick to achieve a hair like texture. 
      This is what you get zooming in, but at a regular viewing distance I think it looks good. 
       
      Next came the boa. Try as I might I couldn't get a good feathery texture going. I could get a good amorphous blob/coral like texture though. Much like the moustache it'll fail upon close inspection but I think with a good paintjob it'll hold up just fine.  

      See I told you that moustache is passable with some distance.

      Now it's just a matter of letting everything dry before priming. I guess it's a good thing we have holiday commitments for the next couple days.
       
      As with any greenstuff project you always end up with some leftovers. After adding a skull to the Hulkster's base I thought I'd share the wealth with a few random models from my desk.

    • By rintintin
      HI, 
      Thought I would create my own topic so I can share the models I create. Crits and comments welcome.
      This is my latest mini. Created just for fun. I think it should be called " The summoning" though I am open to ideas :)



      Got a few pictures of the 3d print of this guy. Not the best photos but you get the idea.



    • By Metalchaos
      Good day everyone, I've been working on a diorama display for some time now and I thought some of you may like the see my progress. I used AutoCad for my sketches and Inventor to build the 3D model. Then I used Blender to texture the model and Slicer to generate de code for my Prusa printer. The following pictures are the steps I went through so far. It’s my first big project. It's taking long but it's a learning experience. Let me know what you think about it so far.
       
      The first image is a screenshot of the final model in Inventor.

       
      Some sketches in AutoCad software.

       
      Floor part in Invetor software.

       
      Generating the code of the floor in Prusa Slicer software.

       
      I got a printing error while printing the floor. The plastic filament and I had to stop the print.

       
      On the next picture, we can see how the parts are on the inside. There is some supports but most of the part is empty to save on printing time and material.

       
      I decided to print the remining floor tiles individually to salvage what I had already been printing. I then glued each tile on the base.

       
      I had another printing error on the column, and I had the print another one.

       
      The column was printed at the highest level of quality my Prusa i3 MK3S can print, which is at a 0.05mm of precision.

       
      The arch was also printed at 0.05mm.
       
      The level of detail is amazing. Even the ring was printed flawlessly without support.

       
      Here’s a screenshot of the wall assembly after I completed texturing it in Blender.

       
      Here’s a screenshot of the wall assembly in Slicer. I generated the code with supports to make sure the door arch would be print perfectly.

       
      It looks perfect like this, so I didn’t see a problem coming.

       
      Some parts of mu model were not right, there were some gaps. The software filled these gaps with support material, so when I see the issue, I decided not to stop the printing session. The support material is showing in drak green the the simulation.

       
      After, when I generated the code without support, I could clearly see the gaps. I think this happened because there were errors, holes I didn’t correct or masking I didn’t remove, on the model I imported from Blender. I will need to investigate farther.

       
      See the result after I removed all the support. Removing the support takes forever by the way. I’ll try to avoid supports if possible, in the future.

       
      Here’s a picture of the wall. It took 40 hours to print only and probably another 40 hours to build, texture and clean the model. I still need to fill the gaps the Greenstuff.

       
      Here are all the parts I printed for this project.

       
      And, all the parts together. I haven’t glue anything yet. There is still some sanding and cleaning to do. I will paint each part separately.

       
      I patched the gaps with liquid Green Stuff.

       
      Closeup of the first layer of liquid Green Stuff.

       
      I converted a 02712 Eye Best from Reaper Miniatures. This is the pewter version of model that was sculpted by Julie Guthrie. I added eye stalks from the 03440 Creature Components II, also from Reaper.

       

       

       
      The Eye Best will be pinned on the wall and the door. All the adventurers I'll be displaying on the diorama are from Reaper Miniatures Dungeon Dwellers brand. From left to right; 07012 Caerindra Thistlemoor, 07004 Stitch Thimbletoe, 07002 Baran Blacktree and 07008 Luwin Phost.

       

       
      The models can be moved from a recess to another to allow different layouts.

       

       
      More to come soon!
       
  • Who's Online   15 Members, 1 Anonymous, 41 Guests (See full list)

×
×
  • Create New...