Jump to content
  • Optionally enter a message with your report.

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By knarthex
      So the ex is going to be joining a new campaign, and she asked me to paint her figure, the Stonehaven female gnome rogue....
       




      Still just starting, but need to motivate myself, as well as keeping track of colors....
      Scalera is Reaper Linen White
      Pupil Warcolours Green 3
      Skin SC 75 Arabic shade...
       
      Check back as more gets done!
       
    • By Pegazus
      Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
       
      Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
       
      You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
       
      Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
       
      I also had the chance to gain some experience on  paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
       
      Basically, I have the scrap booking machine to make my own alien plants:
       
      Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
       
      Tasks to be completed:
       
      Figures Needed
      Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) Gremlin Unit 13 (ECM unit, some large radar dish looking thing) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) Gremlin Units 17, 18, 19, and 20 (gun units) Gremlin Units 21, 22, and 23 (missile units) Gremlin Unit 24 (large gun unit) Gremlin Unit 25 and 26 (junked units; scavenged for parts?) Gremlin Unit 27 (2nd style missile unit) Gremlin Unit 28 (personnel carrier unit)  
      Wight Conversion
      Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope  
      Details to be included
      Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)  
      Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
      Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)  
      Base mounting system
      Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
    • By Peithetairos
      After the rather involved Vlad project I thought of painting something a tad less complicated. 
       
      I chose Elliwyn Heatherlark, the Bones version that is. It is a simple conversion with a weapon swap, new sheath and ultimately a cut-off monster head in her hand. 
       
      I will go heavy on weathering and signs of recent battle to contrast the diminutive appearance of Elliwyn. 
       
      So far I finished the green overcoat and her face.  Army Painter Glistening Blood Effect came in handy. I also tried to add a subtle texture to the overcoat. 
       
      C&C as always welcome. 
    • By Maledrakh
      I am churning out the Bones 4 core set PC-types just to get them out of the way before I can get stuck in with the more interesting monsters and creatures. Apologies in advance for my lack of photographic skill. I thought I had found a good setting, but clearly not for all.
       
       
      #10:

      Manga-haired gnome? A Fairy wearing boots?
    • By 72moonglum
      So here’s my question, got this little person with my last Reaper order, and I just wonder a little.  The miniature is a little bit heavier set or “thicker” than the concept art, and I’m just wondering, does everything think this is a gnome lass and not a young gnome beardless gentleman?
       

       
      She’s kind of similar to the other set that has a very obvious gnomish lady:

       
      Just wondering if everybody else has painted this little hooded gnome as a lass?
  • Who's Online   29 Members, 2 Anonymous, 38 Guests (See full list)

×
×
  • Create New...