Jump to content
Sign in to follow this  
Pingo

I found furniture!

Recommended Posts

On the Shapeways 3D printing online marketplace I found a shop called Pretty Small Things which sells prints of actual vintage furniture at 1:24 and 1:48 scale.

 

1:48 is model railroad O scale. It's a tad large for 28mm scale. But only a tad.

 

And those chairs look great.

  • Like 8

Share this post


Link to post
Share on other sites

The chairs are really cool.  Some of the stuff is surprisingly affordable for a one time off diorama or something, not affordable if you need 100 of them for an army.  I've bookmarked this as well.

Share this post


Link to post
Share on other sites

Not so small prices tho.. :down:

 

 

Shapeways is known for their quality & their high prices unfortunately.

Share this post


Link to post
Share on other sites

They do note that you can contact them for other scales. I know I have to scale everything I print to begin with (English units export, but gets imported as metric), so changing the scale isn't that big of a hassle. And even easier if it's near what they already do. No worrying if it'll print too small.

 

I speak from experience. That poor wooden pallet became just too small, and a little puddle in my machine was born.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Lidless Eye
      I figured I'd do one mega-gallery of the first of my resin 3D printed miniatures.  All are done on an Elegoo Mars.

      Oni Kyojin from Artisan Guild.  My first printed, as they were pre-supported.




      Rangers of Shadow Deep: Incinerator left me with a hankering for an old-school Ogre.  This guy is not really a Heroquest Ogre but a 3D print from a scan of one.





      Demihuman Zombies from DuncanShadow:




      Kobolds from DuncanShadow:




      Warforged from Fabio Schizzo:


       

       
       

       
       

       
       

       
       
      Orcs from Artisan Guild:




      An assorted collection from The Lost Dragons Kickstarter.



      A Dragonborn Paladin and High Elf Druid representing my sister in law and her husband's characters for our Storm King's Thunder campaign from said assortment:




       
       




    • By Kangaroorex
      I had a couple of merchant ships 3d printed for me and while I was at it I thought I would paint up the merchant ships I have from the old Firestorm Armada game.
       
      So from Battlefleet Gothic we have
      2 general merchants
      3 container transports
      4 gas transports
       
      The 3d printing is a little too obvious for my tastes in the ship and there were just too many details for sanding or filling.  I would have liked the print to be finer but this was the first time, we can see what happens in the future.  Overall it was fun to rip apart all the supports and see the ship show up underneath.  I am happy with the results and they will make a nice little convoy to protect for scenerios in either BFG or Firestorm or any of the other space combat games out there.
       

       
      From firestorm armada we have
      2 luxury liners
      2 cargo transports
      1 gas mining and refinery ship.
       

       
      hope you like them
       
    • By Illithar
      Has anyone tried stripping paint from a photo resin miniature? I have one that I... well I messed up on it and It's not really salvageable now unless I can get the paint off. I've heard Simple Green is safe-ish for regular resin (I have read stories of softening and becoming more brittle after re-hardening), but I am not sure if photo resin would be any different. Are there any other cleaners that I might try or should I just dunk it in Simple Green and hope for the best?
    • By Jasper_the_2nd
      Hey look, yet another Jasper topic.....
       
      But this one is different (I hope).  I actually have a time frame in mind, to get this finished before the end of 2020, and submitted for the annual diorama contest.
       
      I love dioramas, and I've been pretty happy with the few I've made. BUT I always put off getting started and then end up rushing over Christmas to get everything done.
      So this year I'm starting in January (if just barely) so that I will hopefully get some stuff done before December.
       
      I've had the idea for this diorama since the very first moment I saw my first "sneak preview" of Khanjira (that would have been approximately Fri, Oct 25, 2013, 7:57 PM ADT, according to when I got the email from Kickstarter).
      My first though was something like "What a beast! Imagine if he was fighting something from a smaller scale, like CAV...."
      So that has been bouncing around in my head ever since.  
      Then I was messaging with @Pochi a few weeks ago about the contests and got talking about dioramas, and I mentioned this idea, and she said I HAD to do it.....so here we are. 
       
      Basic concept is the classic Kaiju attacking a future city harbour. CAVs (any or all of tanks, vehicles, mechs, infantry, maybe even aircraft) defending. (I briefly considered going even smaller scale as I have quite a bit of 6mm stuff too, but CAVs are easier to work with,  I have about a billion of them, and they are awesome).
       
      Today was a beginning.  I grabbed some stuff and laid it out just to get an idea of a size I'm going to want.

      Obviously I just grabbed what was handy to get some scale. Khanjira is represented by my 7 days Khanjira (handy, that ). I plan to try to get him a little more upright, since he won't be on his base and at least his front foot will be "under water". With his pose (which I don't think I have the skill or know how to adjust too much) I'm thinking maybe an elevated highway that he has just crushed to be what his right leg is on.  That or a boat of some sort....we'll see.
      The box is just a reference for the land, glasses are just some buildings.  I'm picturing something similar to the Halifax waterfront with boardwalks or something and docks/jetties (the grey upside down drawer represents) and then big buildings. Army will be in place along the waterfront, so some barricades and stuff. Possibly a trench of energy blasted ruin from the "breath weapon" if I think I can pull that off.  Again, we'll see.
      So just from the mock up, this is going to be fairly massive...like approaching 2 foot kind of dimensions 
      Not something I would do if I was following advice on building award winning dioramas, but then that's not what I'm focusing on.  I just want to make the image in my mind a reality, and I'm using the contest deadline to hopefully focus me.
      I'm also going to have to learn to do a bunch of new stuff for this, which should be fun!
       
      Step one will be to dig out my other Khanjira and start cleaning up up.  And decide on what I'm going to use for a base for this thing.....
       
    • By kristof65
      So these are a selection of the quick & dirty prints/paint jobs I did on my modular Raider Planetary Exploration Vehicles I designed. 








      It wasn't my original intention for this to be school bus yellow, but since it ended up that way, I've decided I'm going to create some decals to make it look similar to the school bus my
      wife drives. 



  • Who's Online   7 Members, 0 Anonymous, 43 Guests (See full list)

×
×
  • Create New...