Recently Browsing 0 members
No registered users viewing this page.
dwarven tattooed monk
A Thrym Project :: A Custom Miniature developed on Hero Forge and 3D printed by a friend.
Started working on character of mine who is a Dwarven Tattooed Monk. As I mentioned, I created him using Hero Forge, downloaded the .STL, and had him printed elsewhere.
I enjoy using the interface on Hero Forge so far. I have designed and purchased 3 STLs and 2 minis.
Once I received the print, I made a manual adjustment to his skull. An ironic happenstance, given the character's name.
Tor, being a dwarf and confident in his skills against ogres was going toe-to-toe with a rather large ogre with a great club. This is not something unusual so far. The party had been exploring an ogre controlled encampment searching for an item and information for a tribe of centaurs nearby. Unfortunately, Tor suffered a critical hit from the Ogre Champion's club and took a lot of damage when he was already near unconsciousness. He effectively had his namesake applied to his own noggin.
So I removed a large segment of his skull by the patch to approximate the results of his disfigurement once the party ... eventually ... managed to raise him from the dead. His demeanor and appearance was never pleasing to begin with and now it's even worse.
I painted on a primer coat first so I could see where I was removing plastic better. The majority of the work was done with a rounded mini-file as well as a small gouge chisel. I cleaned up the space with a small sanding twig.
For a color scheme, his pallid skin is Reaper's Fair Skin. The coat is Army Painter's D&D Vampire Garments with Army Painter D&D Mouldy Wash. I put the wash over his skin and his hand wraps as well. The coat's trim is just the Vampire Garments again.
For the tans I used Reaper's Desert Sand, Desert Stone, Desert Tan, and Woodland Brown; or some combination thereof. The eye patch, the lining of the coat and the belt are Army Painter's D&D Wraith Black as well as the tattoos on his right and left forearms and the side of his head.
His boots started out as Reaper's Coal Black but I need to reshake the bottle before going back to it.
Yes, I know the pics and the paint wash are a little dark, but the next set of pics will be better lit. I am planning on layering his highlights up to brighter points.
More work to come soon.
Stay Tuned and Safe. Enjoy.
By Generic Fighter
So, I've been working on this one for far too long. A customized Medusa made from two D&D Minis, A Fiendish Snake and one of the medusa minis from the line.
I used Pro-Create to make the tattered skirt so I didn't have to try to sculpt her butt! :P
So I'm branching out from typical miniatures and trying something new. My son has really been into Hotwheels lately, and it turns out that there's an entire Hotwheels Customization culture out there much like the minis we like to paint. I put two and two together and figured why not try it out? So, here's the WIP (some of it at least) of the Fairlady 2000 I'm currently working on. Besides, if it ends up horribly, Hotwheels are only .94 cents at Wally World
Unfortunately, I got the bright idea to WIP after I was pretty much done painting as much as I'm going to on the first go-round. However, here's the comparison between the Yellow "stock" Datsun and the Orangy one I've painted.
Also, the various components of the build that I've worked on.
Finally, the installing of new axles and Red Rider wheels found on the more "premium" versions of Hotwheels. I may use the donor truck as a future "distressed" diorama if I feel froggy enough. The floorboard is also painted a metal shade as you can kind of see it in the interior if you bother to try to see it. I just finished gluing the axles and wheels in about five minutes ago, so it'll have to sit for a bit to dry. If all goes well, I'll have completed my first custom Hotwheel. I'll be able to zoom across the table in a one of a kind upgrade. WHHHEEEEEEEEE!!!!
I'll post final pics after everything's dry and fitted. Thank you for checking it out!
P.S.: Thos pics are tiny! I'll post larger ones in the Show Off when it's done. I apologize for the oversight
By Disciple of Sakura
In my campaign world, I've long had mention of a mythical monster known as Verigana the Tormentor, who is figured prominently in the epic planar war that took place in the misty past. Servant of the goddess of Pain, she slew a champion of the goddess of Mercy. I've had her in mind for quite a while, and often had a winged marilith in mind when I've envisioned her. But, now that I'm running a campaign set during that long-ago time period, I wanted Verigana to appear and be truly intimidating, and a marilith by herself just wouldn't cut it. The idea of her being a Hecatoncheires was very, very attractive. In Pathfinder, those beasties are a bit more than I really wanted, but the idea of a scaled-down version would be nice. However, miniatures of such hundred-handed monsters aren't exactly flooding the market. I decided to get on a famous auction site and search for the term just by itself, and I came across a miniature of Final Fantasy XIII's Hecatoncheires figure. So, I picked one up, got one of Reaper's 77393 Avukavali models, and went to work modifying the creature. I cut off the hands of each of the principle arms, dug through my bits bin and found all the spare goblin arms I had from a box of GW's Warhammer Fantasy figures, and then did a bunch of weapon swaps to put weapons into the left hands. I managed to wear my hands out drilling pins and gluing together, and cut my finger on a new X-Acto blade due to general clumsiness, but overall, I'm pretty satisfied with how she came about after I got her finished. The only nudity in the miniature is from a Reaper mini, but posting rules indicate I should link her instead of posting her. Obviously, this may be NSFW. Enjoy.
Deviant Art Gallery
Who's Online 21 Members, 1 Anonymous, 37 Guests (See full list)