Jump to content

Recommended Posts

Got my Wave 1 of MERCS: Recon last week.  Wave 1 consists of the two versions of the game: Counter Threat, which has the CCC and EU as the MERCS, and Assassination Protocol, which has the KemVar and Keizai Waza.   Each faction consists of 5 MERCS, and each box also comes with 10 SecFor (Security Forces): 5 SecForII with Shotguns and 5 SecForIII with machine guns.  The sculpts for these are all the same in a box, but the sculpts are different between boxes, so you end up with 2 different sculpts of each time 5.

Wave two will include all sorts of KS exclusive figs as well as a whole mess of faction boxes for all the other factions in the MERCS universe.  From the posts I've seen today they have just hit the water from China.

 

While the SecFor figs are cool and will get painted, they aren't needed to play the game.  The box comes with tokens for each of the SecFor so you can just use those to begin with.  But they don't provide tokens for the MERCS, so need to get at least one set of them done so I can play (yeah, I could make print off standies or something to start, but nah....)

 

I decided to start with the EU, just because they looked like they could all be fully assembled before painting without being too annoying to paint.

 

So far, I've got 3 assembled.

 

post-8239-0-29201300-1454531159_thumb.jpg

 

From left to right they are the Medic, the Sergeant and the Leader.

 

  • Like 9
Link to post
Share on other sites
  • Replies 141
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Got my Wave 1 of MERCS: Recon last week.  Wave 1 consists of the two versions of the game: Counter Threat, which has the CCC and EU as the MERCS, and Assassination Protocol, which has the KemVar and K

Paint!       Got them washed and primed on the weekend, and loaded up my work paint box with some appropriate colours. More or less following the standard colour scheme for EU. Just shadow c

Well, it took two more days to finish the SecFor IV.  Not because of the flash, but because they really done want to keep the gun arm's shoulder in its socket. I noticed yesterday that the first guy'

Posted Images

*** Low eerie whispering voice***

 

PPPHHHAAAAIIIINNNNTTTTTT

Neeexxxxttt weeeeeeeeekkkk.......

 

We're having work done on the house and my work area at home is currently packed with furniture, so I'm doing prep and assembly at work, then taking them home to wash and prime (think they may get upset if I start spray priming here in my cubicle.....).  Then I'll bring them back in to paint.

So I'll get them primed over the weekend and hopefully figure out the paint scheme. Looks like the EU are usually blues and grays.

  • Like 1
Link to post
Share on other sites

More assembly!

 

post-8239-0-06437000-1454607872_thumb.jpg

 

Left to right they are the EU Analyst (that is some sort of spike for interfacing into systems I believe, not his finger....), the EU Shock trooper and, because I had some time left, the KemVar Shock trooper, the only one piece MERC out of the 20 figures.  Strangely she is a way more bendy plastic than all the other ones I've assembled so far.  As bendy as Bones I'd say.

 

 

  • Like 5
Link to post
Share on other sites

Got a couple more KemVar assembled today.

 

post-8239-0-52374900-1454702805.jpg

 

On the left is the Engineer and on the right the Leader.

 

Both were a little stubborn  about getting the arms to set up in place so I only got the two done.

We'll see if that sword stays in place or if I have to go back and pin it....

 

 

  • Like 6
Link to post
Share on other sites

Paint!

 

post-8239-0-41237200-1454951868_thumb.jpg

 

post-8239-0-68227200-1454951866_thumb.jpg

 

Got them washed and primed on the weekend, and loaded up my work paint box with some appropriate colours.

More or less following the standard colour scheme for EU.

Just shadow colours so far, and the lighter gray areas are just the primer.  They will stay a lighter gray though.

 

The Sergeant got the colour treatment since I realized I only had 15 minutes left and had only got three of them done with the Noir Black.  I waned to see how it would look roughed in.  Alright I think.

 

We'll see if I get to paint much this week...there is a blizzard supposed to roll in later today. Between that and appointments there may not be many lunches for painting, and my paint table is still surrounded by furniture at home due to renos....

 

 

 

 

  • Like 8
Link to post
Share on other sites

Managed to get in and do some painting today at lunch.  I'll be happy when the work on the house is done and things settle down.

 

post-8239-0-33508200-1455210165_thumb.jpg

 

Finished up the initial base coats with the shadow colours.  well, except for the light gray bits, they are still primer.

 

Tomorrow I'm off to take the kid to a hockey tournament, and Monday is a holiday up here now, so likely won't get another update in until Tuesday....

 

 

  • Like 6
Link to post
Share on other sites

Back from the tournament (they went 1-2 in the first round, so didn't make the semis...).

Decided I might as well try to get the 4 eyes in this squad taken care of (the rest all have visors).

 

post-8239-0-91714300-1455642472.jpgpost-8239-0-97116500-1455642471.jpg

 

The Sergeant I think looks better in real life.  I didn't get a good angle on him.

The Leader I think looks better in the picture.  ::):

 

Faces are done, and I did another coat on the blue, and touched up the black around the faces.

  • Like 5
Link to post
Share on other sites

Skipped yesterday.  Figured it wasn't worth trying to paint with a headache...stupid on call.

 

Today was all about figuring out the grays.

 

post-8239-0-42442300-1455815374.jpgpost-8239-0-73630900-1455815373.jpg

 

I started on the legs.  They are now pretty much done except for the blue and a few touch ups

The upper body has has had the lighter gray base coated  and washed.

 

So the dark gray is a noir black base with the dark elf skin triad.

The lighter gray is a roughly 1"1 mix of rainy gray and gray liner, then a AP Warpaints Dark Tone ink(wash), then the base colour again, and some straight rainy gray for highlights.

 

Another day will hopefully get the Sergeant pretty close to done.

 

The bases I'm going to keep simple for now, in noir black .  I'm thinking about doing the 4 quadrants on the the edges in the squad accent colours (so blue and yellow for these guys) but I'm worried that might be too bright and distracting from the figure.....

Thoughts?

 

  • Like 4
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By maphatter
      The latest MODULAR DIGITAL BATTLEMAP expansion seeks to take the Meanderverse back in time and underwater to the glory days of this technological legend some say was a paradise - others a ferocious war machine. Dock at the Port, stroll through the Atlantean Water Gardens and explore the alien wonder of this mystical city on dry land - and then again after a cataclysm sinks it beneath the waves. Preview the campaign HERE. Launches July 21st on Kickstarter.
       
       
       
      https://www.kickstarter.com/projects/gametilewarehouse/meanders-5-rpg-modular-digital-battlemaps-atlantis

    • By Mckenna35
      Finished a couple more gang members for Warlord Games Judge Dredd game.  Painted with reaper and Vallejo.  In theory they'll get used for demos so I didn't want to burn a lot f time on the bases.  These were some of their first figures in their new resin.  It's kind of like Bones I as far as material goes.  Also think they some of their early  ones in 3d modelling as the "engraving" is almost too light.  makes it hard to pick out details and you've got to be careful not to apply too heavy a coat or you'll fill in lines pretty easily.

    • By Chaoswolf
      'Scorch' Sotniko was hot. This whole damn world was hot, but this stinking jungle somehow seemed to be hotter still. The other mercenaries he was moving through the jungle with looked like they were feeling about the same as he was. Strange Midnight, their scout, didn't seem to be bothered as much as everyone else, but that was because he came from the rad deserts of Zargove-3. This was just a nice stroll in the woods for him. Scorch knew that they'd be at the rendezvous point in another half hour or so, and then he'd get a break. He'd be able to refill his canteens, as well as to remove the heavy Intergalactic Marine Expeditionary Force armor that he'd gotten a few months back off the black market. Between the heavy armor, the protective anti-flash gear, the flamethrower he was carrying, and all the rest of his gear, he had a fairly heavy load. It'd be good to able to shed the weight, even if only for a little while. Some of the other guys gave him grief about his chosen equipment, but they hadn't seen what the bugs they were hunting could do to a man; Scorch had. From what he'd heard, the IMEF armor was supposed to offer a substantial amount of protection from the claws and fangs that most of their current enemy was armed with. Likewise, the flamethrower was good for keeping them at a distance and killing whole swaths of the things at once. Yeah, it might be hot, but the way Scorch figured it, that was better than all the screamin', bleedin' and dyin' he remembered from his first encounter with the bugs.
       
      Nothing fancy, just a fairly quick tabletop paint job to shake the rust off.
       

    • By Mckenna35
      Thought some of you might find this of interest:  https://www.kickstarter.com/projects/bombshellminis/isw-71b-scout-ship?ref=user_menu
       
      Available as either a physical model or STL
       
      Command power. Command efficiency. Command versatility. Command respect.
      Able to go from atmosphere to Jump in under 18 cronons. Equipped with four Ultonium-powered 418ml SXV-55 Bust-A-Drives™. Voted Starship and Pilot's Scout Ship of the Year. Available with three different equipment payloads. The fastest, safest, most versatile scout ship you will ever fly.
      The all new ISW-71B.
      Boldly go.
      ISW-71B SCOUT SHIP
      Illyrian Ship Works is renowned for excellence in both design and efficiency. The ISW-71B is no exception. It sets the new standard for classic design with modern performance.
      The Scout Ship Miniature Kit is a "game" scale multi-part model pressure cast in high quality urethane resin for easy assembly. It is sized to be compatible with most 28-35mm miniatures for tabletop battle games and RPGs.  The kit may be upgraded through unlocked stretch goals or with Add-On packs available through the Kickstarter project.
      THIS MODEL WILL BE AVAILABLE AS BOTH A RESIN KIT AND AS STL FILE DOWNLOADS.
      In the CORE SET you will get :
      1 ISW-71B Scout Ship kit Unlocked Stretch Goals The ship measures 12"/30.48cm in length overall with a 4.75"/12.06cm diameter hull and an 8"/20.30cm wingspan. It should be suitable for any scenario in the COUNTERBLAST Adventure Battle Game and will fit in on the tabletop with plenty of  scenery and vehicles for other games.
       There are two basic pledges - The Scout Ship Resin Kit which is a physical model kit that will be shipped to you once production is complete or the Scout Ship STL Digital Kit which you can download. Each kit has all the same parts and will include all of the the unlocked CORE stretch goals.
      We have also added the LANCER Backer Level. This is an a la carte level for backers who may want access to the pledge manager after the campaign ends, or may only want certain individual Add On items.
      *NOTE - THIS LEVEL DOES NOT INCLUDE THE FREE STRETCH GOAL ITEMS AVAILABLE ON THE OTHER BACKER LEVLES*
      The parts have been test-printed on EPAX X1K and EPAX E10 resin printers. All of the parts have been sized to fit on a build plate that has a 130.56mm (L) x 82.62mm (W) x 155mm (H) build volume.
      Throughout the campaign we will be sharing pics from other printers in FDM materials too.
       
    • By Auberon
      This year's Christmas present to myself was a Sonic Mini 4k printer.  I've done a few runs now and promised a pic of a painted mini at some point.  Gardain here was a bit of a failure as it turns out there were a few problems with the pre-supports.  Still, he's 99% ok which means he's good enough to use as an example, but also that I don't care enough to paint to a high standard.
       
      So with that in mind, he was painted with a thin layer of primer through the airbrush, a slightly thinned basecoat, and then a few washes.  I.e. the point is to show off how much detail the printer can do, how visible the layer lines are, etc, not how well I can (or can't) paint. He is a 32mm scale dwarf, which means he is a little taller than a Reaper dwarf, but not quite as tall as a Reaper human.
       

       
      The very bottom of this gauntlet pancaked, but you can only really see it if he is upside down.
       

       
      Yup, that's a hair support.  The presupport was at too low of an angle so it bonded to the figure.
       


       
      Btw, those eyes are tiny. His right eye is really bad because the arm blocks coming in from below, the sculpted bushy eyebrow makes any high angle impossible, and he has a big nose.  Jab straight in and hit where you aim!  In fact, they are so small that I can't even tell I painted them at arm's length.  If you skipped them to get him on the table no one would notice.
       

       
      And there you have it, my first [painted] 3D print.
  • Who's Online   26 Members, 2 Anonymous, 61 Guests (See full list)


×
×
  • Create New...