Jump to content

jcg

Dwarven Forge KS4

Recommended Posts

The only issue I noticed with my KS4 order was that instead of getting 4 standard corner platforms and two transition platforms for the towers, I received 6 standard platforms. But I think I can just cut the extra bits off two of the standard ones to make them the same as transition; so I don't think I'll bother with a replacement. My arch walls are also a bit smaller than they should be, so I'm going to put a touch of green stuff on their edges so they fit into the CBS slots better. Another thing not worth really worrying about --- although apparently in some cases, this is a bigger issue. Some report that the CBS walls make the modular castle walls bow out, or the new arch walls just sliding right out of the original CBS pieces. Some kind of shrinkage problem at the factory... the factory really should be held responsible for that... they're supposed to be able to produce these to pretty tight specifications, and they seem to have failed on that. (Maybe DF should have caught it, but then maybe this issue didn't occur in the test pieces sent to them.) 

 

Hope you get your stuff soon, Talae!  I imagine it's still a busy time for them... did you send an email and not hear back? If so, and it's been a few days, I might send an email to check... by all accounts, Suzy is very responsive. 

  • Like 2

Share this post


Link to post
Share on other sites

Hmm. I sent my first email on 6/22 and again this weekend. I have not heard on either. Anyone else inquire about replacement parts?

  • Like 1

Share this post


Link to post
Share on other sites
On 7/24/2017 at 7:55 PM, Talae said:

Hmm. I sent my first email on 6/22 and again this weekend. I have not heard on either. Anyone else inquire about replacement parts?

I posted about this on Facebook. Stephen then sent me a friend request and it turns out I was sending to the wrong email address. He called the person that will be taking care of things and got me squared away. He also asked for some pics of stuff in action and of my DF collection. He razzed me a little for not having everything painted and is an all-around good guy.

  • Like 3

Share this post


Link to post
Share on other sites
2 hours ago, Maglok said:

Get to painting then! I'm already on my castle stuff :D

I just bought a table full of second hand pieces that are mostly unpainted for a great deal. It set me back quite a bit in the percentage of painted minis quite a bit...

 

 

20170728_085123.jpg

  • Like 3

Share this post


Link to post
Share on other sites
2 hours ago, Maglok said:

Whats the little cardboard token?

The white and black square in the bottom-center of the pic? That is an octopus drink coaster.

Share this post


Link to post
Share on other sites
1 hour ago, sigmaone said:

Can I ask whether you found the 2nd hand pieces online or in person? And if online, where? 

In person. Through a guy at work, of all places.

 

Everything is Dwarvenite except the painted caverns pieces in the top right. Those are resin.

 

I bought all of his Dwarven Forge stuff, but couldn't afford to buy the other stuff he is getting rid of (books, minis, other terrain, a custom game table, etc).

 

Now to get painting. I have a lot to paint now. Probably half of the pieces I own :(. I just have so much other stuff to paint: Cthulhu Wars, Bones minis, Zombicide, Myth, etc.

 

I do know a guy based out of Canada that sells on Facebook and eBay though. He ships from US if needed.

Share this post


Link to post
Share on other sites
On 7/15/2017 at 7:30 AM, Talae said:

Has anyone got their replacement order?

 

I haven't heard about the missing parts from my first shipment (My second shipment and my preorder arrived with no mistakes, but the main one had a number of mistakes.).

My replacement order arrived from China! Now to work up the motivation to paint...

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/263291121/desktophero-free-3d-printable-character-maker?ref=nav_search
    • By haldir
      https://www.kickstarter.com/projects/266656159/bestiary-3d-printable-models
       
      As I backed Brayan's previous KS but never got my files (I got a email in regards to this KS) but a quick email response & I had my file that I backed + a bonus file. Love the look on the minis. The goblins can be new PC gobs for ReaperCon We Be Goblins. Love the Oriental dragon as well.
    • By Talae
      The Stygian Depths - Lost Temple of Xibalba, via @Kickstarter https://www.kickstarter.com/projects/524168246/the-stygian-depths-lost-temple-of-xibalba
    • By TDG
      Hello guys hope all are well, I'd like to show you my project for 3D printable miniatures that I have just launched;

      https://www.kickstarter.com/projects/568025447/3d-printable-miniatures-for-tabletop-and-rpg-games?ref=9faem8
       
      They are a selection of 6 models inclduing a Dragon, Drake and Kirin with a forest/woodland theme along with a Dragon head dice tower, all the best guys



    • By Lidless Eye
      Seeing as there wasn't a thread yet, I wanted to share another project that just hit Kickstarter, "DEPTHS OF SAVAGE ATOLL"

      It's a great project I was happy to be involved with, doing some of the FDM print testing.  Everything looks great and prints well!

      https://www.kickstarter.com/projects/ecaroth/depths-of-savage-atoll-3d-printable-tabletop-model/description
      Welcome to "Depths of Savage Atoll" - an island chain on the edge of the world where the currents of the ocean, waves of the sea, sands of the beaches, and old-growth of the jungle are all teeming with life, adventure,  and countless dangers.
      Enrich your tabletop RPG or wargaming experience with 3D print-ready minis, monsters, terrain, and buildings from island, nautical, and undersea environment.
       
      This Kickstarter provides character minis, monsters, scatter terrain, buildings, and more for you to produce at home on your FDM or resin 3D printer. Rewards are for digital STL files to print the products shown and described in this campaign. Rewards are split into two categories: Scatter, and Minis - designed to be used together or independently, and all for normal tabletop gaming scale (28-32mm).
       



       
       
       
  • Who's Online   7 Members, 0 Anonymous, 160 Guests (See full list)

×