Jump to content

SGHawkins09

Box of Goodwill, Basing Edition - Sign Up Thread

Recommended Posts

Alright here we go . . .

 

In the simplest terms, this is a basing version of the Box of Goodwill. Those of us who have a lot basing materials will be able to share our wealth with those new to basing. Others might have interesting bits and pieces that they use and want to add some to inspire others. Or you might have easy access to certain materials that others do not.

 

Due to the nature of some of the materials in the box, at this time the box will only be making the rounds in the US.

 

Please provide the following info in your replies to this thread:

Where you live

If you want to be a box starter or can contribute to seeding a box, if we need a second box

 

What's Going In:

  1. Any structural basing material – cork, plasticard, bark, branches, sand, etc
  2. Any decorative basing material – leaves, flock, static grass, tufts, etc
  3. Bits and Pieces – electronics, gears, beads, stones, etc
  4. Scenic elements
  5. Plinths
  6. Premade and stamped bases, try to not overwhelm the box with these
  7. No miniatures, that is what the regular BoGW is for

Note:

 

If you are sending natural materials that you collected yourself, please take necessary steps to get rid on any unwanted nasties. Some methods mentioned in the interest thread were a quick dip in some bleach water and then rinse and dry off and/or baking.

 

Please make sure everything is properly packaged, sealed, and labeled.

 

Basic Info:

Into a medium flat rate box will go a bunch of basing material. Then the box will be sent off to those in the circuit. As a one to one exchange of materials might be difficult for those newer to basing, this will work more off an honor system in that you add what you can but take what you need. As we all know in basing, a little can go a long way. So in the box will be some small baggies that will allow you to take what you need without having to take it all. For example, if there is a large bag of flock or gravel, you would be able to take a little instead of having to take the whole bag. Once you have gotten what you need and added what you can, you will pack it up and send it on.

 

More Details:

  1. I, SGHawkins09, will put together the box and start it on its way. I will PM the tracking info of the box to the first recipient and then each recipient after that will PM the tracking number to myself AND the person that they're shipping it to.
  2. Participants will post in the arrival/departure thread when they have received the package and againwhen they send it off to the next person. They can post pictures of what they took in the chatter thread but it is not mandatory.
  3. Participants are responsible for contacting the next person in line and getting their shipping information. The order of the circuit will be public knowledge, so feel free to exchange shipping info how/whenever you wish. If the next person does not provide their shipping information within a reasonable amount of time, they will be skipped.
  4. You will have 1 week from time of arrival to take a look and make your choices before sending it on its way.
  5. Shipping will be via a medium flat rate box. Tracking and insurance are included in the cost. In the event of it disappearing off the face of the earth, the person that mailed the box will make the insurance claim and use the proceeds to purchase items to fill and ship a replacement box.
  6. Sign ups will end Midnight March 5th (Pacific Time).  Once I know who is participating, I will figure out the order, and put up the Arrival/Departure thread. The order will be in the first post of both it and the Chatter thread.
  7. I will aim to get the box sent out to the first person on March 11th.
  8. If something comes up and you need to drop out for whatever reason or you place in line needs to be adjusted, let me know as soon as possible so I can make the necessary adjustments.

I think that is it, if there is something I missed or you need more information ask in the Chatter thread or PM me. 

 

 

  • Like 6

Share this post


Link to post
Share on other sites

Please provide the following info in your replies to this thread:

Where you live

If you want to be a box starter or can contribute to seeding a box, if we need a second box

 

What's Going In:

  • Any structural basing material – cork, plasticard, bark, branches, sand, etc
  • Any decorative basing material – leaves, flock, static grass, tufts, etc
  • Bits and Pieces – electronics, gears, beads, stones, etc
  • Scenic elements
  • Plinths
  • Premade and stamped bases, try to not overwhelm the box with these
  • No miniatures, that is what the regular BoGW is for
Note:

 

If you are sending natural materials that you collected yourself, please take necessary steps to get rid on any unwanted nasties. Some methods mentioned in the interest thread were a quick dip in some bleach water and then rinse and dry off and/or baking.

 

Please make sure everything is properly packaged, sealed, and labeled.

 

Basic Info:

 

Into a medium flat rate box will go a bunch of basing material. Then the box will be sent off to those in the circuit. As a one to one exchange of materials might be difficult for those newer to basing, this will work more off an honor system in that you add what you can but take what you need. As we all know in basing, a little can go a long way. So in the box will be some small baggies that will allow you to take what you need without having to take it all. For example, if there is a large bag of flock or gravel, you would be able to take a little instead of having to take the whole bag. Once you have gotten what you need and added what you can, you will pack it up and send it on.

Suburb of Austin, Texas

 

I can help seed. Would prefer to be midline to help replenish if needed.

 

I can add pretty much anything mentioned above except for stamped bases.

 

I also have some hardboard in need of cutting down (I have a jigsaw) if you want to let me know what sizes to cut down to.

 

I have about 100 or so ProPaint pots I can clean up and donate for use to hold basing material, or I can divvy my seeding amounts up into bite-sized chunks. I also have a box of snack-sized baggies that can be donated.

 

Do we want to include a notebook for people to list what they took/added?

  • Like 4

Share this post


Link to post
Share on other sites

I have premade bases that I cast in resin from my own molds.

 

I guess I can seed a box with a few handfulls, or start a box with a few handfulls? How big is the box supposed to be?

 

 

EDIT: Sorry, found it: Medium flat rate box. Well, if somebody wants to send me the address of a fairly close-by person (I'm in the SF Bay Area), I will start a box and send it off by Monday or Tuesday. I have some resin I need to use up before it ages.

Edited by Bruunwald
  • Like 3

Share this post


Link to post
Share on other sites

 

Please provide the following info in your replies to this thread:

Where you live

If you want to be a box starter or can contribute to seeding a box, if we need a second box

 

What's Going In:

  • Any structural basing material – cork, plasticard, bark, branches, sand, etc
  • Any decorative basing material – leaves, flock, static grass, tufts, etc
  • Bits and Pieces – electronics, gears, beads, stones, etc
  • Scenic elements
  • Plinths
  • Premade and stamped bases, try to not overwhelm the box with these
  • No miniatures, that is what the regular BoGW is for
Note:

 

If you are sending natural materials that you collected yourself, please take necessary steps to get rid on any unwanted nasties. Some methods mentioned in the interest thread were a quick dip in some bleach water and then rinse and dry off and/or baking.

 

Please make sure everything is properly packaged, sealed, and labeled.

 

Basic Info:

 

Into a medium flat rate box will go a bunch of basing material. Then the box will be sent off to those in the circuit. As a one to one exchange of materials might be difficult for those newer to basing, this will work more off an honor system in that you add what you can but take what you need. As we all know in basing, a little can go a long way. So in the box will be some small baggies that will allow you to take what you need without having to take it all. For example, if there is a large bag of flock or gravel, you would be able to take a little instead of having to take the whole bag. Once you have gotten what you need and added what you can, you will pack it up and send it on.

Suburb of Austin, Texas

 

I can help seed. Would prefer to be midline to help replenish if needed.

 

I can add pretty much anything mentioned above except for stamped bases.

 

I also have some hardboard in need of cutting down (I have a jigsaw) if you want to let me know what sizes to cut down to.

 

I have about 100 or so ProPaint pots I can clean up and donate for use to hold basing material, or I can divvy my seeding amounts up into bite-sized chunks. I also have a box of snack-sized baggies that can be donated.

 

Do we want to include a notebook for people to list what they took/added?

 

 

Responded in the Chatter thread.

 

I have premade bases that I cast in resin from my own molds.

 

I guess I can seed a box with a few handfulls, or start a box with a few handfulls? How big is the box supposed to be?

 

 

EDIT: Sorry, found it: Medium flat rate box. Well, if somebody wants to send me the address of a fairly close-by person (I'm in the SF Bay Area), I will start a box and send it off by Monday or Tuesday. I have some resin I need to use up before it ages.

 

Yep, a medium flat rate box it is. If you want to contribute bases to the box without being in the line up, I can PM you my address and I can add them in at the beginning as I am in Los Angeles. Or if you have think you have enough other basing materials as well to start a second box, we can wait for the sign up period to end to get the routes figured out.

  • Like 2

Share this post


Link to post
Share on other sites

 

 

Please provide the following info in your replies to this thread:

Where you live

If you want to be a box starter or can contribute to seeding a box, if we need a second box

 

What's Going In:

  • Any structural basing material – cork, plasticard, bark, branches, sand, etc
  • Any decorative basing material – leaves, flock, static grass, tufts, etc
  • Bits and Pieces – electronics, gears, beads, stones, etc
  • Scenic elements
  • Plinths
  • Premade and stamped bases, try to not overwhelm the box with these
  • No miniatures, that is what the regular BoGW is for
Note:

 

If you are sending natural materials that you collected yourself, please take necessary steps to get rid on any unwanted nasties. Some methods mentioned in the interest thread were a quick dip in some bleach water and then rinse and dry off and/or baking.

 

Please make sure everything is properly packaged, sealed, and labeled.

 

Basic Info:

 

Into a medium flat rate box will go a bunch of basing material. Then the box will be sent off to those in the circuit. As a one to one exchange of materials might be difficult for those newer to basing, this will work more off an honor system in that you add what you can but take what you need. As we all know in basing, a little can go a long way. So in the box will be some small baggies that will allow you to take what you need without having to take it all. For example, if there is a large bag of flock or gravel, you would be able to take a little instead of having to take the whole bag. Once you have gotten what you need and added what you can, you will pack it up and send it on.

Suburb of Austin, Texas

 

I can help seed. Would prefer to be midline to help replenish if needed.

 

I can add pretty much anything mentioned above except for stamped bases.

 

I also have some hardboard in need of cutting down (I have a jigsaw) if you want to let me know what sizes to cut down to.

 

I have about 100 or so ProPaint pots I can clean up and donate for use to hold basing material, or I can divvy my seeding amounts up into bite-sized chunks. I also have a box of snack-sized baggies that can be donated.

 

Do we want to include a notebook for people to list what they took/added?

 

 

Responded in the Chatter thread.

 

I have premade bases that I cast in resin from my own molds.

 

I guess I can seed a box with a few handfulls, or start a box with a few handfulls? How big is the box supposed to be?

 

 

EDIT: Sorry, found it: Medium flat rate box. Well, if somebody wants to send me the address of a fairly close-by person (I'm in the SF Bay Area), I will start a box and send it off by Monday or Tuesday. I have some resin I need to use up before it ages.

 

Yep, a medium flat rate box it is. If you want to contribute bases to the box without being in the line up, I can PM you my address and I can add them in at the beginning as I am in Los Angeles. Or if you have think you have enough other basing materials as well to start a second box, we can wait for the sign up period to end to get the routes figured out.

 

I can send you the bases first. I'm easy.

 

Go ahead and PM me.

  • Like 3

Share this post


Link to post
Share on other sites

 Southeastern CT...

Don't quite have enough to start a box.

(Not sure if Dilvish will be getting in on this one officially or not, but we're basically a face-to-face hand-off so there may well be more than one person involved at my stop.)

 

 

 I have a bunch of greenstuff and milliput I need to use up since the next round of the regular BoG won't start for awhile and I plan to pick up new putty soon.

I can bang out simple objects like rocks, snakes, sticks/branches, rotten logs, stumps, etc.(even slightly more complex things like campfires or simple stone altars), pretty quickly.

 

Is there anything particular anybody would like to see in the box? If so, bring it up in the chatter thread and I'll see what I can do.

Edited by Mad Jack
  • Like 5

Share this post


Link to post
Share on other sites

*waves hi to fellow bay area citizen, bruunwald*

 

I'm in. I do not have much and will contribute as best as I can. Bay area, ca.

  • Like 4

Share this post


Link to post
Share on other sites

I live in the midwest.

 

Since i accidentally kept a whole bag of basing supplies from round 3, I feel as though i should throw my hat in the ring.

  • Like 6

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Morihalda
      Several friends helpfully pointed out that before I started throwing wild ideas at Ma'al's base, I should probably practice them somewhere else first. That base is on my February list, so I gotta get practicing!
       
      Blightfang:
      - Completely covered giant base.
      - No integrated parts. I chopped 'em off.
      - Water with a "live" edge!
      - The first dragon I owned, blessed upon me by my first Box of Goodwill group, and a perfect fit for a Silversage dragon.
       
      Narthrax:
      - Plain, round, smaller base.
      - Rocks from his original base are staying.
      - Probably no water.
      - He's just plain cool. He's gonna be my Boelen's python!
       
      I used PVA glue to put the cork together, and hot glued everything to the bases. Thank you for your sacrifices, peanut butter and pickle lids!

       
      I fell in love with Paepercut's youtube channel after @Clearman mentioned it in my Ma'al thread. Y'all. That guy is SO COOL. The vast majority of the things I'll be doing here are from his videos. And if I don't think they are, they probably still are because I'm forgetful like that.   Onward!
       
      Actually. Onward in a little bit. I gotta go check out the nearest store and see if they have distilled water for the next steps. Be right back!
    • By SGHawkins09
      The official arrival/departure thread for Round 2 of the Basing Edition of the Box of Goodwill.
       
      PLEASE make sure to post when you receive the box and when you send it off.

      Remember, NO CHATTER, chatter thread is here:

      Box of Goodwill, Basing Edition Round 2 - Chatter Thread


      SGHawkins09 - sent 2/16
      Keianna - arrived 2/20, sent 2/27
      Sylverthorne - arrived 3/1, sent 3/9
      NecroMancer - arrived 3/12, sent 3/15
      hungerfan - arrived 3/18, sent 3/23
      Ulfheathen - arrived 3/26, sent 4/2
      Aryanun - arrived 4/4, 
      hiddenone32 - new box arrived 6/11, sent 6/15
      Clearman - arrived 6/18
      Guildenstern - arrived 6/27, sent 7/2
      Shadowphaze - arrived 7/5, sent 7/9
      Generic Fighter - arrived 7/11
      Dilvish the Deliverer - arrived 8/8

      Dilvish the Deliverer - sent 2/26
      Wyvernfire - arrived 2/27, sent 3/10
      Chaoswolf - arrived 3/12, sent 3/26
      Knarthex - arrived 3/28, sent 4/13
      Paradoxical Mouse - arrived 4/16
      Dragoneye - arrived 8/8, sent ReaperCon
      Kangaroorex - arrived ReaperCon, sent 9/18
      Fire_Eyes - arrived 9/20, sent 
      Keianna - arrived 10/1, sent 10/10
      Pegazus - arrived 10/12
      SparrowMarie - arrived 10/24
      LittleBluberry - arrived 11/10
      SGHawkins09 - arrived 01/18/19
       
      Only two groups this time and they are fairly large so make sure to keep the boxes moving. Also you may notice Keianna is listed in both groups, this is intentional as she did not receive a box last time.
    • By SparrowMarie
      So I'm going to be making a diorama for a friend soon. I have a pretty solid idea of what I want to do but no idea how to go about it. I've never worked with cork before and am going to be using quite a bit of it. I want to pour water effects(?) into it but don't want the cork to soak it up. My questions are (photos to be added below for reference):
       
      How do I seal the cork so it won't absorb the resin water effects? Do I need to seal the wood I am basing it on as well? If so what is the best way to do that? What is the best glue to put the cork on the wood, sealed or not?  
      ETA: 
      How do I fix the small hairline cracks in the cork (not sure if they're visible in the picture)? Kind of related but what is the best glue for plastic to wood (I'm going to be putting the wood on top of a painted Tropicana lid)?  

    • By Rat13
      I've made no secret about my opinions on Games Workshop. Though my painting box is full of their miniatures they were always bought second and sometimes third hand (I never wanted GW to get any of my money). Even my previous Cadians were bought from my local games store that has no affiliation with GW (I also know those sets and blisters came with the business when it was bought almost twenty years ago). Now I find myself in the unique position of building a Cadian army.
       
      My wife and I used to play weekly in D&D Adventure League but with the birth of our first child it looks like that won't be possible (We want to continue gaming at our current store but its a bit of drive and the kid is at the rolling stage so she doesn't want to be held or sit in her seat; she wants to be on the floor and we all know what gameshop floors are like). I've offered to watch the child so she can go or to switch off each week but she only wants to go together. Gaming together has always been part of our relationship, and she doesn't want to lose that. I couldn't agree more, its good to share a hobby with your spouse.
       
      That's when our friends started trying to recruit us to play Warhammer 40K with them. At first I was resistant but our friends get together often to play and in our area its always possible to find a game (Depending on the size it can be played fairly quickly in comparison to D&D too). After some discussion we decided 40K would give me something to paint, but it would also give us both something to play and eventually something to play together.
       
      Which brings us to this new project. Since I figured watching me assemble miniatures would be pretty boring I'm starting this thread right before I prime them. So here is most of my assembled starter set (I've got quite a few cheap sets of bits arriving over the next couple weeks and I'm not exactly sure what unit I'd like to create next so that's why I have so many unfinished figures).
       
      I'm still not a big fan of GW but having an excuse to see our friends more often is pretty nice. In a way we're kinda trading one gaming group for another (that sounds pretty mean but I think you understand what I'm saying).
  • Who's Online   56 Members, 3 Anonymous, 287 Guests (See full list)

×