Jump to content

Sign in to follow this  
fishnjeeps

CAV Bones Rach Despot

Recommended Posts

Finished the first of my CAV Bones Kickstarter. This is a tabletop quality piece but I thought I'd share.

The Red is the Rach Red that was in the kickstarter with a Secret Weapon soft body black wash. I used RMSHD Dirty Grey and Army Painter White for the freehand and turrent launcher. RMS Troll Shadow was used for the treads and wheels with soft body black and P3 Pig Iron for the gun barrel and metal details on the wheels. Its not super detailed but will look good for gaming use and is easily touched up if needed. 

 

Pics...

 

0317162226b_zpsow2fjy78.jpg

 

0317162226a_zpsnxffzqrf.jpg

 

0317162226_zps8ecjnvd6.jpg

Edited by fishnjeeps
  • Like 21

Share this post


Link to post
Share on other sites

Nice! I've only painted one of my Ace CAVs, but this makes me want to pull out one of my despots that just came and give it a try. 

  • Like 1

Share this post


Link to post
Share on other sites

How long and wide is this model??

 

Thanks.

I measured the unassembled I've got, and it looks like the treads are approximately 1.5" long (41mm) and the turret is 2" long (50mm). Width is .875" (22mm) across the treads.
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Adrift
      Terezinya was painted up to be a vampire character in my dnd game, the rest are fairly self explanatory. 
       
      The translucent green Bones were given a coating of Grass Green India Ink and then had details highlighted out. They're retained their translucent quality while having better detail visibility. 







    • By WhiteWulfe
      Finally sort of cleaned up my desk, so there's actually room to work again... Not quite enough room for hubby to work on his side yet, but we'll get there soon. ish. TM. 
       
       
      Tentatively calling them the "Fiendish Flying Foxes" or something to that effect, but not fully certain yet hence the title not being as... fluffy as they usually are for me.  Kind of want to sneak "fire" in there somewhere too (Fierce, Fiery, Flying Foxes sort of rolls off the tongue), but haven't quite figured that out just yet.   ...And yes, I like alliteration, for some strange reason.
       
      Anyways!  Been slowly collecting various CAVs, and since the race I like the fluff of the most currently isn't really available (at least until September-ish, aka Malvernis in the 3rd kickstarter) I figured I'd start with a Ritterlich group!  While I do have the rulebook, I haven't really read it yet but it's on the to-do "eventually" list....  So I aimed to go with at least 2 of what I liked, and 4 of what I really liked.  Seems to work at least for basics out of the gate anyways...  Thanks to a package going missing for over two months (and being reshipped due to such), I wound up with a few more than originally planned in some areas ^_^;;;;  
       
      So, just what do the foxes have, at least so far?
       
      Attack: 2x 72231 Cataphract, 4x 72050 Firedrake, 4x 72267 Rhino II, 4x 72283 Sabertooth, 4x 72273 Tiger, 2x 72278 Wolverine
      Fire Support: 6x 72282 Cheetah, 2x 72230 Silverback, 2x 72201 Tiamat
      Recon: 2x 72208 Cougar
       
      Extras as why not: 6x 72284 Enforcer (came as freebies, so maybe spoils of war? :P)
       
      Most are still in blister packs, but I do have five of them on the desk so far.....


      ^My first Cougar....  Who will also be the first, uhm... subject for my Vallejo terrain paste...

      ^Initial layout for the bases for my Cataphracts!

      ^My two Silverbacks, although I suspect more will see the table at some point because I apparently love missiles.
       
       
      Why the 40mm circular bases?  Uhm, well...  It's partially because I prefer circular ones, partially because they're more stable on 40mm bases, and also because there's more room to do basing stuff with ^_^;;;;;;
    • By ryc03
      Haven't post anything here for so long...
       
      I'm not really following any color scheme here, since I am not familiar with the lore of CAV at all (I'm more interested in the game).
       
      Also I wish I learnt a bit more about painting technique for glowing effect before painting the windows...
       
       
       
       
        
       
       
       

       

       

       

       

       
       
    • By Adrift
      Attached are photos of a slew of different miniatures and projects I've been working on in 2019. 
       
      The Battleguard Golem is clearly a Warforged Paladin in my mind as was painted accordingly; he's mounted onto a Frontline Games base. The Jungle Titan is on the base of a Reaper Dragon I gave my son as a toy previously. The Galladoria Games entrances are both attached to Frontline Games Stones Dungeon tiles. The Terratiles are from a Kickstarter that started fulfilling last month; they were a ReaperCon vendor in 2017 and make good stuff! On the CAV Thunderbird and Raptor, I wanted to simulate some lights; not as much love for the Kahn.  The Thunderbird was missing a shoulder mount so I subbed in a axehead from a long-age discarded figure. The Iron Golem has inspired a monster in my DND world called a Forgeblast Iron Golem and I wanted to simulate discoloration of the iron as though it is being superheated from within; I also wanted it to look as though heat was trying to escape from a few plate patches. Khai the Huntress from Bombshell is on a metal Reaper skulls base; I painted three of the skulls with a glowing green eye to add more interest.   
      Like everyone else, just trying to be creative, get better and have fun. 




















    • By Savage Coyote
      Hey there, here's some of my Almirthil CAV's from the 7th CAV Guards "Never Fail" Regiment.  With Almirthil have some "Soviet" trappings, I ran with it and used an olive-y green for my units similar to Soviet armor from the Cold War period!  All logos and the bear mural are hand painted (the squiggle lines are numbers for the faction!) 
       
      Concussion CAV (Fire Support)
       



       
      Bear(s) CAV (fire support)
       


       
      Growler CAV (recon)
       


       
      Rhino CAV (Ritterlich CAV sent to the Almirthil on a "Lend Lease" Policy)
       


       
      Tiamet CAV (Fire Support)  (Ritterlich CAV sent to the Almirthil on a "Lend Lease" Policy)
       


       
  • Who's Online   46 Members, 2 Anonymous, 133 Guests (See full list)

×