Jump to content

Sign in to follow this  
Edsterdoom

CAV Bones - Terran Tsuiseki

Recommended Posts

Here is the second bones model of the evening as selected by my kids. This is the Terran Tsuiseki. The model is not bad for the plastic although a firmer mix would have prevented such warping. The model was boiled and dropped in cold water but I doubt it will improve much past this.

 

Anyway, as instructed I had to paint this with a green colour scheme so this was once again a nice simple base coat, mid coat and highlight followed by a green ink wash and then a repeat of the process.

 

I kept the scheme nice and simple to aid with the painting of the remaining Terran models.

 

post-11245-0-17353900-1458428823_thumb.jpg

 

As always thanks for looking and comments welcome.

  • Like 16

Share this post


Link to post
Share on other sites

You did very well on this my only comment would be to highlight the edges of the wing more

Share this post


Link to post
Share on other sites

Yeah, these ones warped pretty badly. One of mine has a malformed engine too. Still, pretty cool, although I do like the Kraken as model better. 

Share this post


Link to post
Share on other sites

Good job.

I loved the sculpt I saw in the KS so much that I ordered a few extras... But I got disappointed by how they turned out in Bones (warping and details looking soft).

 

Yours look pretty nice though.

Share this post


Link to post
Share on other sites

Solid work on the model. Maybe a little more dark lining on the panel lines. Otherwise a great piece!

 

I was looking at mine last week and wondering if there is enough space to drill and run some thin brass rod through the super bendy pieces to help lend some support.

 

At a quick glance, it reminds me of the A-10 Thunderbolt.

 

Nice paint job!

My understanding is that was intentional.

  • Like 1

Share this post


Link to post
Share on other sites

Solid work on the model. Maybe a little more dark lining on the panel lines. Otherwise a great piece!

 

I was looking at mine last week and wondering if there is enough space to drill and run some thin brass rod through the super bendy pieces to help lend some support.

 

 

At a quick glance, it reminds me of the A-10 Thunderbolt.

 

Nice paint job!

My understanding is that was intentional.

I'm not sure if there is enough alternatively an additional frame could be added on the inside possibly like a staple?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By NOLA Chris
      Painted up another bad guy for my players to encounter!
      Used contrast paints and light drybrushing on the stone
       
      Added the chompy goo-gore with glossy red



    • By Pegazus
      Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
       
      Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
       
      You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
       
      Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
       
      I also had the chance to gain some experience on  paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
       
      Basically, I have the scrap booking machine to make my own alien plants:
       
      Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
       
      Tasks to be completed:
       
      Figures Needed
      Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) Gremlin Unit 13 (ECM unit, some large radar dish looking thing) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) Gremlin Units 17, 18, 19, and 20 (gun units) Gremlin Units 21, 22, and 23 (missile units) Gremlin Unit 24 (large gun unit) Gremlin Unit 25 and 26 (junked units; scavenged for parts?) Gremlin Unit 27 (2nd style missile unit) Gremlin Unit 28 (personnel carrier unit)  
      Wight Conversion
      Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope  
      Details to be included
      Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)  
      Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
      Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)  
      Base mounting system
      Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
    • By Evilhalfling
      Clothes inspired by fox hunters.
      My painted writting on the scroll is rubish, notice you cant see it in these pictures. 
      It is very hard to reach the scroll from behind, or around the curls. 
       
      It is my third figure from the Dreadmere expansion, grabbed randomly from the "This looks fun to paint" group from that expansion. 
       


       
      found the metal version - I need to make some fixes on this one. 
    • By Evilhalfling
      I am painting my way through the core set of bones3 
      He was in the original 30 
      I cannot identify him more than that.  I cant find him on figure finder, and I have no idea how reaper would classify either his weapon or his armor. 
      a mace/polearm?  robes with brigadine? 
      He is listed on an old spreadsheet as "Sorcerer"  Wut? 
      needless to say, he is not under "Sorcerer" in on the reaper web site. 
       
       
       
       
       

  • Who's Online   36 Members, 3 Anonymous, 204 Guests (See full list)

×