Jump to content
  • Optionally enter a message with your report.

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Shadespyre
      Hello Reaper friends!  You might remember I did a whole tribe of Hill Giants on a display board, with hex bases?
       
      This is my follow up to that, this time: Stone Giants.
       
      Errrm, it all got a bit out of hand, and I'd LOVE some input from you all, please
       
      This is where I'm at after a week and I'm a bit stuck tbh.




       
      I think I need to decide more about what the "finish" will look like before I go a lot further. Once I cover that foam with more than paint it's going to be harder to make changes. I'm thinking of sort of "cladding" it in pieces of slate, with sculpted  bits / groundwork in the gaps?
       
      I'd also love to hear suggestions for other miniatures and features to add to the scene to break up those big open rocky spaces. Current extra bits and bobs are just there for a sense of scale and how extra minis might "interrupt" or "enhance" the scene.
       
      Some next steps though:
      - cork around the hexes on the platforms for the bases to fit into
      - some sort of "door frame"
      - "box in" the sides (which are cut out of a continuing mountainside, in my head at least)
       
      Please, rain your ideas and encouragements upon me!
       
       
    • By MoonglowMinis
      Help! I'm hating this paintjob.
       
      I grabbed this demilich thinking it'd be a fun and easy paintjob. But everything I do makes me hate it more.
       


       
      I was trying to go for a green flame look, so yellow on the inside, and gradually darker green highlights on the outside. These were drybrushed and then cleaned up by hand. I think this is where the problem started because it's not reading as fire. It just looks like a blobby mess?
       
      Should I just scrap it and start over with more of an ethereal glow that's darker in the middle and lighter on the edges?
       
      I also am not happy with the base. I've never painted a 2D base before, I've always added some kind of texturing material. And although I'm reasonably satisfied with how the base looks on the summoning circle behind the demilich, it looks so bad on the demilich base. And I think my green glow isn't helping. 
       
      And finally the Bones. I imagined that if there was a green light behind the Bones then they'd be tinted green and darker on the outside. Again .. this just doesn't look right.
       
      I'm normally fairly confident in my painting abilities, but I think I've landed in unfamiliar territory and I'm just not sure how to salvage or proceed. What can I do?
    • By Otyugh
      This is my filthy first.
       
      I finally gave in and purchased one of the Bones figures. It is the otyugh-ish filth beast by Bob Ridolfi.
       

      It is a big change from the metal minis I usually purchase. The material is way bendy, almost like a green Gumby toy.


      The coolest thing is the way it is baka yoke, and all the pieces are "keyed" to a hole. I would have to try really hard to mess up the assembly on this one!

    • By AussieAusborn
      Greetings y'all!
       
      I'm starting this thread to use as a painting blog, to help catalog my journey, and to use as a source of ongoing motivation. I have a LOT of stuff I've been putting off, that I want to get through for a homebrew campaign I'm working on, and some warbands for Frostgrave, as well. So, I'll take any extra motivation I can get Once I actually finish pieces, I'll make sure to post them in that part of the forum.
       
      To start things off, I have a dragon I've been working on for a couple of weeks, and just got to the point where it's "good enough for now," although definitely not finished. It's easily my favorite piece I've ever owned, so I put off doing any work on it until I was "good enough" to do the piece justice. That is, until I realized that would never happen , so I decided to:
       
      1) Do the darned thing
      2) Do some work on it every day
      3) Push myself outside my comfort zone to try new things
      4) Be patient and forgiving with myself
      5) To not freak out when I try something that I don't like, and just go ahead and fix it
       
      There's still a good amount to do to it (I have a list with 15 bullet points on it, and growing!), but I'm happy enough looking at it, and want to take a break to focus on some other pieces.
       
      I took some progress shots (though perhaps not as many as I'd have liked). So please, join me as we journey through my learning experience:
       

       
      I fully assembled the mini before putting down any paint. Here's where the mini was after a couple days work, about 4-5 hrs. I used an airbrush to give it a zenithal undercoat with black and white, and then to lay in the base coats of the red and blue. I then painted the underbelly and the wing-fingers with a brush.
       

       
      Here, I'm trying to show the work I've done (still fairly subtle, at this point) on building up the vibrancy/transitions on the red skin/scales. I was fairly happy at this point, as I could start to see that I might actually be able to paint this to the standard I want.
       

       
      The next day, I did some work on the face, horns, and blocked in the body spikes. I generally liked the mouth and tongue, but felt it was a bit vibrant. I thought the blue on the horns was alright, but also wasn't completely sold on it.
       

       
      Here's where it was after another `30min of work. Since I felt the tongue was too much, I did something about it! I did a very light glaze with a grey, just to knock down the saturation a bit. Looks better. I added some more blue to the horns, and still wasn't quite happy with it. Picked out the teeth, which is nice, easy bit of definition. And that eye!!! It looked much better than I expected, although that's the last time it would be that well defined...
       


       
      Here it is after another couple days of progress, building up that red (it takes soooooo long on something this big!!!!), as well as more work on the mouth/face. I'd accidentally painted over the eye (which becomes a recurring theme in this tale ), so I blocked in some color, just to separate it from the face. I added a glaze of 'RMP's fair skin' to the tongue, and now I'm lovin' it. Also added some fleshy-ness to the gums on the upper jaw (though it's a little hard to tell), and that was definitely another good decision.
       

       
      Here I continued to build up the red, progress is slow but steady. Not pictured (which is unfortunate, because it was a good learning experience) is my attempt to redo the horn entirely, to a scheme that was a transition of bone to brown to black at the tip...I was really unhappy with it. I had the bone starting around the eye ridges in at attempt to add more contrast and draw the viewer's eye towards the face, but it just looked awful. So I spent a good while redoing the horn and fixing the whole face. I'm glad I made that mistake, as I think the face looks much better than it did before I started on the horn. Part of that was adding in a new level of bright highlights.
       

       
      Here's the mini in some soft lighting, and although the picture is kinda blurry, it better shows the transitions throughout the red. I think this was also the point where I started working on shading the red, by applying a light blue-black glaze to the shaded areas, which really helped add some contrast to the piece.
       

       
      I had an accident that almost gave me a heart attack, where the figure seemingly jumped off the desk Luckily, I caught it before it hit the ground, and it sustained no major damage. It did separate where the dragon attaches on to the base, and although that was a little frustrating, it ended up being a happy little accident, as it made it MUCH MUCH easier to work on the base. I started by putting down some paints and pigments, until it was at a place I thought was ok. Also, the rock spire that it's curled around was originally about 6 inches taller, which I cut off to better see all of the dragon. So, I started work on sculpting a new top. I started by building up thin layers of cardboard with superglue, to level it off (it had quite a slant to it). Then I mixed up some greenstuff, and tried to match the overall flow and texture of of the rocks. Although not a perfect match, it's close enough to not be distracting. Mission accomplished!! The pillars were a part of the mini.
       

       
      And here's the beast in its current state. I painted the newly sculpted top to match what I'd already done, and left the pillars with a super quick drybrushing. I touched up the eye to look acceptable (it's on my 'to do' list), added some grass tufts to the base, and was happy to leave it be like this, for a time. The final pic is another attempt to 'more accurately'  show the value transitions with the red, though the colors seem a tad washed out.
       
      Thanks for taking a look at my work, and for reading my ramblings! C&C is welcome  As I said, I have a to do list for the dragon, but I'm not afraid to add more to it!!! I'll strive to make a post in here a few times a week, and eventually you'll get to see a completed dragon!
       
      EDIT: I forgot to mention that once the dragon broke away from the base (super cleanly, luckily), I took the opportunity to redo the underbelly on the whole model, darkening it up some. And along the neck, I experimented with wet blending for the first time! I've been apprehensive to try it before, but decided this was a good spot to experiment, as it's a large enough area, but felt less...consequential, I guess, if I messed it up. And I'm pretty pleased with the result!
       
      Next up: Frostgrave warbands for me and my brother!
    • By MoonglowMinis
      First time showing something off on the forums! Normally only post to my instagram @MoonglowMinis
       
      Had a blast painting this one up! Had to tap into my painterly side to get the glow effect I wanted and to transition the plating down to the end of the tail where there was no sculpted detail. 
       
      Hope you all like it!
       

       

  • Who's Online   23 Members, 0 Anonymous, 35 Guests (See full list)

×
×
  • Create New...