Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By vegascat
      I made this model at a Reaper Bones make & take at Historicon 2015(?).  I really enjoyed making him and thought he turned out well and had plans to paint him one day......and then the Secret Sophie came along and my recipient wanted a cool monster or creature and I thought this model fit the bill in spades.   The main model I used is KAGUNK, OGRE CHIEFTAIN (https://www.reapermini.com/search/ogre/latest/77105), armed with a demonic looking whip, using a sarcophagus lid as a shield (https://www.reapermini.com/search/crypt/latest/77137), legs from...something (gryphon maybe), spines from a small dragon, and some various heads as trophies around his waist. 
       
      I decided to name him Takzez and have given him two brief write ups - one as a bad guy and one as a good guy.  However, I do want to have the receiver to have something to himself and he can let me know later if he'd like me to share that info or not later.  But in the meantime, here he is.  Apologies for the photos, I rushed as it is already late.

       
       
      I do wish I'd had more time to work on his skin and legs, although the skin turned out tons better than my first attempt at it.  Oh wow, I am going to hit that inner bottom corner on the shield with a was a few times before I send it.
       
      C&C welcome!
       
    • By CAVBOSS
      WE ARE LIVE... https://www.kickstarter.com/projects/272456130/talon-games-cav-strike-ops-iii

    • By Jordan Peacock
      Recently, Modiphius released an STL model of the Corvega Coupe, so fans can 3D-print their own (provided they have access to a 3D printer, of course).  I am fortunate enough to have a friend (Chris Thesing) who actually has *two* 3D printers.  He printed off two runs of the model: one in lower resolution on his older PrintrBot Plus printer (using Solutech PLA filament), and another using his newer, higher-resolution resin printer.
       

      ^^^
      The PLA filament version of the model.  This model prints in two pieces -- one for the undercarriage and wheel hubs, and another for the upper body shell.  Alas, there are no tires, and no separate segments for the gull-wing doors, windows, hood, trunk, etc.  This was printed flat on the bed, and due to the low resolution this of course means a lot of striation on those gently curving surfaces.  (This is how it looked after an initial spritz of white spray primer, as the sheen of the bare plastic was problematic for taking photos of the detail, such as it is.)
       

      ^^^
      On the right is the resin-printed version of the same model.  First off, it's a much higher resolution, but also Chris tried printing it at a 45-degree angle (supported by temporary scaffolding) as he's seen several others do.  I'm not quite sure about the advantages of doing this, but I think it makes a difference, because the curved surfaces of the hood, roof, and trunk are very shallow curves.  Actually, I think if the car were put up straight on its bumper, there'd be the best result, because each of the slices across the car would have a minimum variation of width from one to the next, versus the big jumps in footprint area to each layer when the car is printed right-side-up.  That's just my notion, however; there might be factors I'm unaware of that are contributing to this.
       
      Anyway, on the left is the PLA car, but I've gone back with some sandpaper to try to smooth it out a bit.  The trouble is, I noticed that I'd utterly *destroyed* the shallow scribing detail of the gull-wing doors on the roof, and I was in danger of obliterating the Chryslus symbol on the hood and other such things, so I called it quits after a bit, and hoped I could make up for it by camouflaging the striation with "rust paint" effects.
       
       

       
      Here's a side-by-side of the two models now that each one is a little closer in terms of where I am in the process.  The green car on the left is the PLA model (you can still see the striation despite my sanding), whereas the resin one is the red one on the right.  I went in and painted the window areas and chrome detail in grey, and splashed some paint on the PLA undercarriage in preparation for making it look a bit rusted out.  At this point, I pretty much decided that the resin car is going to look pretty much intact, though a bit grungy, with the thought that it's a car that's been restored Post-War, or has somehow otherwise been kept in relatively good condition.  (I could after all use it as a "show car" for my "Chryslus Show Room" scenario.)
       
       
    • By Jordan Peacock
      Online, from a certain market of miniatures, I found some "Kaosball" team expansion packs on clearance (for a better price than what they're listed at now, as of this writing).  Each pack contains 13 32mm-scale minis in 2 poses (6 of one pose on 25mm square bases, and 7 of an alt pose on 25mm round bases), a "bust" that represents the "team coach," and a game-specific 12-sided die (which I suppose isn't much use for anything, unless I actually wanted to play the game).  Anyway, this worked out to being under $1 a figure, and the sculpts looked interesting, so I got a few packs.  (I find it hilarious, though, that while most of the packs are marked down, the "Felinia Hellcats" -- scantily-clad gun-toting cat-girls -- are specifically marked as "[CLEARANCE]" and yet they're priced at about 3x the asking price for each of the other teams.)
       
      I originally picked these guys up (the "Samaria Barbarians") with a vague intent that "someday" I would run a Savage Worlds convention one-shot scenario heavily inspired by the "Brütal Legend" video game ... but it occurred to me that few if any of my players would have heard of that game, and I'm no particular "expert" on anything rock-and-roll-related, so maybe I'm not the best person to GM such a setting.

      However, I could always use a few more post-apocalyptic wastelanders.  The "big hair" style here doesn't necessarily look like it would fit the current Fallout aesthetic as established in Fallout 4 and Fallout 76, but I think these guys wouldn't look terribly out of place in the original Fallout 1 & 2 (what with all the "Mad Max" and "Fist of the North Star" wannabes wandering about in those games).  I removed the figures from their bases, putty-and-texture-stamped the 25mm round bases, putty-and-texture-stamped some plastic 25mm rounds for the remaining figures, and did a few hand swaps and bit-add-ons to give a few of the figures visible ranged weaponry.  (I figured that would give me a little more buy-in if I were to field a gang of these guys for an encounter and then they start FIRING on the PCs, versus what pushback I might get if they *appeared* to only be armed with axes.)

      I used some paper printed license plates to add some "junk armor" elements to further reinforce the "post-apocalyptic" vibe.

      Each team pack also comes with a "bust" to represent the team coach.  I went with a bronze-and-verdigris scheme for each.
  • Who's Online   23 Members, 1 Anonymous, 31 Guests (See full list)

×
×
  • Create New...