Jump to content

  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Cranky Dog
      They're finally done, my two Sir Forscale entries.

      First one: Sir Justin For$ale. He's in it for the money.




      Second one: Sir Justin Forscale, Grand Surveyor, complete with reflective strip safety tabard, a 3 inch accurate yard stick (at ½ in precision, who needs Bryangles?) and plumb line.

       

    • By Lord of the Dish Pit
      A while back I figured that no collection was really complete without a Sir Forscale and I thought I'd paint him in the colors of Figmentius. Eventually I'll do one for all the houses.

      I was pleasantly surprised how well the freehand on the Unicorn turned out. Tonight is also the first time using my new camera, and the photos turned out quite well after I figured out what a Macro was.
       
       
    • By OneBoot
      I was inspired by how the paint combination on the Copper head of my Ma'al Drakar turned out, so I thought it would be fun to turn a mini into a bronze/copper statue!
       
      Given that I still didn't have a fully painted Sir Forscale (@Reaperbryan owns all 3 of the ones I've painted to date), I decided it was high time I had one of my own.
       
      Those two things resulted in this:

       

       

       

       
      I removed him from his broccoli base and glued him onto a 20mm Reaper base, so he'd have a pedestal sort of thing to stand on. He was very quick to paint up, just Green Liner, Copper Verdigris, a light Turquoise Ink wash, then careful drybrushing of Coppery Orange.
       
      I had fun thinking about what the wear patterns on a regular statue would be, hence why sections of his base and his right foot are so much shinier than the rest. Because given any flat surface, people are going to sit on it to rest or take pictures, and prominent areas are usually kept shined from people rubbing them.
       
      And here's a couple of pics just for fun, since Ma'al is still hanging out on my desk:

       

       
      Huzzah!
      --OneBoot :D
    • By Jack Brown
      Nothing fancy, just practicing/getting back into the swing of painting.




    • By lazylich
      My inaugural Bones 3 paint, the Iron Golem (menacing Sir Forscale that I got from either a paint-and-take at PAX or a learn-to-paint kit, can't remember which).
       
      I'm not sure it really comes out in the picture, but I started with black/gray zenithal priming layers, airbrushed a not-too-thick layer of a bright metallic over it, dark wash, and then heavily shaded it with pure black glazes (there's supposed to be some left/right shading with the glazes, but it doesn't show well in the pictures I don't think). Then touched all the gouges with the metallic again, and painted the optics and vents with red and orange, on the assumption that iron golems are powered by some kind of eldritch furnace internally.
       
      (Sir Forscale was splashed with whatever bright primary color was close at hand, like you do when you're a complete noob at a paint-and-take, and I hope I got the right SKU from the list that came with my shipment.)

  • Who's Online   12 Members, 0 Anonymous, 176 Guests (See full list)

×