Jump to content

Recommended Posts

I've been doing a lot of Sci-Fi lately, so felt like doing something a bit more...old fashioned.

I have a ton (not literally, I think it was under 100 lbs....) of Empire of the Dead miniatures, a Steampunk/Victorian/Horror minis game based in 1888 London from West Wind Productions.  So I took a look through the boxes and thought I'd try my hand at one of the Hansom Cabs I have.

It should be fun.  This will be the first resin and metal model I've done in....ummm, let's go with "some time"...  This will be the first carriage I've done.  And this will be the first horse I've ever done (that wasn't a mutated Goblin anyway....). And it will hopefully get me back to working on miniatures at home a few evenings a week.

 

So, what's in the bag?

 

post-8239-0-85690700-1470148027_thumb.jpg

 

Hmmm, lots of bits.  Springs, an axle, some lamps, a bunch of heads.

 

I decided to focus on the carriage for now, and cleaned everything up.

post-8239-0-21780000-1470148024_thumb.jpg

 

There was a slight mold misalignment on the back of the main body which required some work (and still needs a bit more).  There were also a couple of bubbles that needed to be taken care of.

 

post-8239-0-07081100-1470148022.jpg  post-8239-0-60249700-1470148025.jpg

 

I've also gone through and drilled pilot holes for each of the mounting spots where they weren't well defined.  I'll drill them out further as needed when I get to test fitting all the pieces.

 

At this point I had to let the green stuff cure so that was it for the evening.

  • Like 15
Link to post
Share on other sites

Some slow progress being made. Every step seems to need something to dry (putty, super glue, things that have been washed....).

 

Here's a shot of the interior of the cab, where I puttied one bubble.

post-8239-0-47873200-1470576415.jpg

 

This will all be dark and in shadow so I think the casting will be fine for that.  The next one I do (I have few of these) I may "empty" the passenger compartment with the dremel for a change.

 

I started working on the driver, by picking the head I liked and pinning it.

post-8239-0-58290800-1470576414.jpg

 

He's since been attached to the upper body, which I'll get a pic of later.

 

Then it was time to start on the suspension, which is a bit confusing.  West Wind has a couple of pics on their store for this item so that helped a bit.

 

First I put in the leaf springs.

post-8239-0-53873800-1470576416.jpg

 

Then put in the axle.

post-8239-0-46545200-1470576719.jpg

 

I twisted the tabs that connect the axle to the springs a bit to get a better contact.  I'm not sure how such a suspension would work in the real world, but since it's all going to  be on the bottom of the model I say good enough  ::):

 

Up next will be putting on the lanterns,the rein guides, the front piece that connects to the horse (not sure what those are called) and maybe attach the body of the driver to the bottom half before priming.  The wheels and the horse will definitely get attached later.

  • Like 9
Link to post
Share on other sites

Forgot to list the steps in the pieces to attach....

 

post-8239-0-55685400-1470584559.jpg

 

 

Here is the driver with his head attached.

 

post-8239-0-42116400-1470584558.jpg

 

Think I'll get the pin ready but paint him separate...

 

 

And I removed the metal that attached the horse's hooves together.  

post-8239-0-65088600-1470584560.jpg

 

I'm going to be mounting it on a cobblestone base so that had to go.

 

  • Like 8
Link to post
Share on other sites

Got a bit done over the last few days while on vacation.

 

Started with priming the main part of the cab.

post-8239-0-23305200-1471216561.jpg

 

Then put some pins in for the driver and the horse.

 

post-8239-0-20553700-1471216560_thumb.jpg

 

Later that day it appears I did some more priming, but no pics....

 

 

Yesterday I did a bit of painting.

 

Based the cab in Noir Black as I think I want this one black.

 

post-8239-0-46997200-1471216563.jpg

 

also a dark brown for the driver's pants.  Not sure if it is the right brown yet....

 

 

 

Tried out some Chestnut Brown on the horse.

post-8239-0-05087900-1471216557.jpg

 

I think it will do.

 

 

And started on the driver as well.

 

post-8239-0-02608200-1471216559.jpg

 

I haven't used Bronzed skin triad before.  We'll see after we get past the shadow colour, it's pretty orange right now...

The scarf will likely change to more of a dingy grey-white, but Creamy Ivory is good for covering the black primer.

 

I'd have got more done but my allergies have been killing my eyes, and the Olympics have been more interesting than I expected....

 

I'll post up what I get done today later.

 

  • Like 7
Link to post
Share on other sites

Well, didn't get as much done as I'd planned, but got further in my book I'm reading than expected.....

 

post-8239-0-56383600-1471357459.jpg

 

Worked on the basecoat for the horse.  Looking better now.

 

 

post-8239-0-72163900-1471357457_thumb.jpg

 

Used Oiled Leather to undercoat where the Brass will be going on the cab.

 

 

And put a was on most of the driver.

 

post-8239-0-47170100-1471357458.jpg

 

 

Since then I worked on the driver some more and had to stop when his right eye wouldn't behave.  Didn't get back to him so he's currently one-eyed ...and no pictures yet.

 

 

  • Like 6
Link to post
Share on other sites

Looking really good, I like the look of the horse so far and have a few minis with horses coming in tomorrow, so will be really interested in watching that progress.  All in all, looks like a fun mini to put together and paint!

 

And yes, the Olympics always seem to draw my attention, even when I don't think they will.  :)

  • Like 2
Link to post
Share on other sites

Had a three day weekend where no painting got accomplished, but yesterday was good.

 

First, I've finished my exchange figure so it is home getting sealed and based.  So I painted a horse at lunch.

 

post-8239-0-81147200-1472042921.jpgpost-8239-0-78732600-1472042919.jpg

 

Finished with a AP Strong Tone wash.  Today I'll probably figure out the leathers. Then go back to highlight.

 

 

And last night I got a decent base coat on all the bits of the passengers, as far as I can tell.

 

post-8239-0-73077000-1472042920.jpg

 

Hopefully I can get them completed tonight.  I don't really want to work on the outside until I get them finished and can stop handling it so much.

 

 

  • Like 6
Link to post
Share on other sites

Well, lots of progress on the horse, not so much on the cab.

 

Yesterday I got a lot done on the horse.

 

post-8239-0-38395700-1472145967.jpgpost-8239-0-36438000-1472145968.jpg

 

I thought the metals were too bright and it still needed some highlighting, but I like.

 

Last night it was fairly late by the time I got to painting and my back was bugging me, so I pretty much just did some priming on the wheels and the other still unconnected piece and called it a day.

 

Today I think I've finished the horse.

 

post-8239-0-53158100-1472145966.jpgpost-8239-0-29923800-1472145965.jpg

 

Did a little highlighting on the body, the harnesses, touched up the boots, added some colours and detail to the hooves and did a black wash over the metals and the heavy padded part of the harness that I've kept black.

 

 

So two parts down, and just the hard part to go!  

And less  than a week to go to get it done and keep my streak alive for the RPChallenge...

 

Hopefully I'll make some good progress tonight as my wife is out visiting her folks and the kids are at camp.

 

  • Like 4
Link to post
Share on other sites

As hoped, some good progress was made, at least until around 10 when my shoulder decided it had had enough with straight lines and that it should start adding a certain randomness to each brush stroke....

 

post-8239-0-27408600-1472219268_thumb.jpg

 

I'm calling the passengers done.

As you can see I've started on the metallics as well. 

 

I did some testing one the side to see how it will look.

 

post-8239-0-55297600-1472219270.jpg

 

And gave the suspension a coat of blackened steel to begin with.

 

post-8239-0-44533900-1472219269.jpg

 

 

Also, I'd dug out the base I wanted for this the other day.  Laast night I gave it a cleaning and then primed it.

 

post-8239-0-74224700-1472219271_thumb.jpg

 

I also primed a few EotD round bases.  I'm planning on painting them all up today at lunch. I've packed up my usual colours for cobblestones (for some reason I use P3 paints for them, think I was just trying out new colours, it worked ok, so no point in messing with a system....).

 

 

  • Like 3
Link to post
Share on other sites

Cobblestone bases.  Not the most exciting thing to spend an hour painting at lunch, so I took some breaks and took some pictures of how I do it.

 

post-8239-0-95439400-1472232731_thumb.jpg

 

Here they are primed, with a couple of my completed ones from a past session to remind me what I did....

 

I then based them in P3 Thamar Black.  That wasn't really worth a picture, so on to the first colour.

 

post-8239-0-73701300-1472232735_thumb.jpg

 

I use 3 greys for the majority of the stones.  I started with P3 Ironhull Grey, doing roughly a 3rd of the stones in it in randomish pattern.

 

 

post-8239-0-80431900-1472232729_thumb.jpg

 

Next was P3 Cyrn Bane Base which has a bit more of a green cast to it.

 

post-8239-0-38849500-1472232727_thumb.jpg

 

Then on to P3 Bastion Grey, which goes a bit more towards a sandy brown.

 

 

And finally the 2 accent colours I use.  P3 Tratior Green and P3 Bloodstone.

 

post-8239-0-87287700-1472232733_thumb.jpg

 

 

And that took lunch.  Monday I will tidy things up a bit, then give the whole thing a black wash.  Then I might pick out some edges if I'm feeling really keen. (Or that might wait until I see where the cab will go on it.)

 

 

  • Like 3
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Glitterwolf
      Design Vehicle and Crew: Titanforge
      Design: Fleeing Vampire in Front : Arch Villain Games
      Design Hanging Corpse : Printed Obsession
      Design Church Ruins: Printed Obsession
      Fleeing Winged Vampire : Reaper Bones Vorvorlake SKU 50329
      Graveyard Fence Part : Reaper
      Tombstones /Barrels/Books/ Weapons: Various.
       
      Printed on Elegoo Mars in Resin.
       
      Part of my Project Children of the Night.
      WIP HERE:
      https://forum.reapermini.com/index.php?/topic/79298-children-of-the-night-by-glitterwolf/page/17/
       
      ******************
       
      Vampires roam the land, but fear not, there are those who dedicated their lives to exterminate them.
      Here we can see how Ernst Holtz and his crew hunt down the evil creatures who were hiding in an abandoned cemetary.
      Once nobles and commoners alike donated money to the Order of the Vampire Hunters, but since the Baron's son and his wife ruled the Barony the order was mocked.
      People no longer believed in the supernatural.
      Ernst suspected the Baron's son and his wife to be behind it but he couldn't prove it yet.
      When he heard rumours of vampires in the area he assembled his crew and took out the now rusty Dampfhammer.
      He would show them!
      He would capture one of those vile creatures and show it to the people, they would believe again!
      Once more the vile Undead would flee before him!
      And maybe he could find out why the Baron's son and his wife wanted to get rid of the Order..
       
      *****************
       
       
       
       






















    • By Mckenna35
      Finished up the companion to the "Stug" mech I posted earlier this year.  This is the "Tiger" mech from West Wind Productions, although this build-out differs from what they currently offer on their website.  Friend of mine picked it up in their kickstarter and asked me to paint it for him as he doesn't like doing vehicles.  I drilled out the "turret" and the legs and epoxied magnets in so the turret can rotate.  They're 1/4" so you can actually pick the thing up by the turret!  Base coat and camo is Tamiya, details are in an assortment of manufacturers paints.  Weathered with an oil pin wash and Secret Weapon pigments.  Markings are from a 1/48 sheet of dry transfers from Archer.




    • By aku-chan
      Presenting the Shrike Urchin, this sewer wader is part of Twisteds Dickensian faction.
       
      Really struggled with this one for some reason (the fact he's very unstable didn't help), but I think he came out okay.
       
      As always, any comments or criticisms are warmly received.
    • By CaptainPete
      Deadlands is a series of Role Playing Games based around alternative history, with the major change taking place on July 3rd, 1863. This change, called The Reckoning, made the US Civil War grind to a halt, resulted in half of California fall into the sea, and had a new miracle substance called Ghost Rock revolutionize technology. The game has used different rules systems; including the original "classic" system, Savage Worlds, a new system that is/was releasing soon, a d20 conversion, and had a GURPS port.
      The Weird West - Beginning in 1876, players would wander around the Weird West, full of monsters, gunfighters, agents of the United States of America, Confederate States of America, the United Kingdom, the Empire of Mexico, the Dominion of Canada, and Lost Angels, might get involved in the Great Rail Wars, get lost in the Sioux Nations, or confront the creations of the New Science.
      The Wasted West - It's 2094 and the world is almost over. Irradiated Ghost Rock bombs, as well as conventional nuclear weapons, were dropped on major cities all over the globe. The east of the Mississippi  river is full of the Walkin' Dead, the city of Lost Angels has fallen into the Pacific Ocean, and the only place where people can eek out a living is the west. Using Spook Juice, you can travel the collapsing highways from Junkyard to the ruins of Boise, and all points in between, traveling with Templars, Tellers, Cyborgs, Toxic Shamans, Sykers, and Junkmen.
      The Way Out West - The final part of the original trilogy of settings, this one is set on Banshee, the first alien world colonized by humanity. Of course, there were native people there first, and history has repeated itself again. Take up a badge and defend the colonists, or rob them instead, or maybe try to work with the natives, now that no one from Earth is coming to help. Ever.
      Deadlands: Noir - Set in the period between World Wars, centered around New Orleans, this was the first new game and first one done in the Savage Worlds system.
       
      So, I made this thread so folks could talk about games they're run/played, ask questions about the setting and system(s), or just share their love for the game.




    • By aku-chan
      Presenting Little Dorothy, the fourth member and leader of the Oz gang from Twisted by Demented games.
      Wasn't as fun to paint as some of the others, but I think she turned out okay.
       
      As a bonus, here she is with Big Dorothy (The original version I painted a while ago):-
       

       
      Weirdly, they both ended up in the same colour dress despite not looking at Big Dorothy until I dug her out to take this piccy.
       
      As always, any comments or criticisms are warmly received.
  • Who's Online   4 Members, 1 Anonymous, 47 Guests (See full list)

×
×
  • Create New...