Recently Browsing 0 members
No registered users viewing this page.
So I finally fell into the temptation and got my first ground based sci fi minis!(I do have spaceships.)
A Cataphract, conquerer , and a halberd by Reaper minis came in with my horsman today! Sadly the halberd is missing a piece so it may in end up being returned.
So my first order of business was a small conversion to the cataphract
And the conquerer has donated the necessary parts for said conversion, specifically his smaller missile pods.
A bit of work with an exacto knife removed said weapons.
And a bit more exacto work to make a spot for the pods on the Cataphract.
Some super glue to assemble the cataphract and voila! It is time for paint!
And don’t worry about the Conquerer, I have a conversion in mind for it too. It just might not be a true mech when I’m done.......
More sci-fi stuff to come soon I hope!
And maybe just maybe I’ll try to make a backstory for these guys.
Thankyou for looking!
This is a Cataphract mech by Reaper minis from Cav with added missile pods from a conquerer mech.
white surface primer
Model Masters paints,
Man! I didn’t realize I used that many colors on this thing!
Enough about paint! Time for pictures!
I have enjoyed painting this up and even got to try something new.
Thankyou for looking and feel free to offer constructive critiques!
I'm planning to paint Ma'al Drakar as Dungeons & Dragons' Dark Lady, Tiamat.
She's going to be, by far, my biggest painting project. Before I start painting, I'm planning some conversions to make her look more like D&D's Chromatic Dragon.
I'd love to get any advice or tips that anyone would like to share about painting large models, or any of the other parts of the process. I'll share my plans, and try to keep up a WIP thread about this grand adventure.
My first step is going to be pretty drastic, so if anyone wants to jump in with advice, please do.
I have WotC's Gargantuan Black Dragon. The forward-sweeping horns are so iconic, my Tiamat's black dragon head (Ma'al's lower right head) should have horns like that. The Gargantuan Black's a perfect scale to use for Tiamat's horns. I'm actually planning to carefully cut the horns off the black dragon, make a 2-part mold, cast a set of horns for Tiamat, and reattach the horns back on the black dragon.
Am I out of my mind? Does any one see potential problems with this plan, other than the usual challenges of casting minis, etc?
Thanks in advance for any advice, feedback, and encouragement!
Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
I also had the chance to gain some experience on paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
Basically, I have the scrap booking machine to make my own alien plants:
Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
Tasks to be completed:
Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) Gremlin Unit 13 (ECM unit, some large radar dish looking thing) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) Gremlin Units 17, 18, 19, and 20 (gun units) Gremlin Units 21, 22, and 23 (missile units) Gremlin Unit 24 (large gun unit) Gremlin Unit 25 and 26 (junked units; scavenged for parts?) Gremlin Unit 27 (2nd style missile unit) Gremlin Unit 28 (personnel carrier unit)
Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope
Details to be included
Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)
Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)
Base mounting system
Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
Who's Online 10 Members, 0 Anonymous, 39 Guests (See full list)