Jump to content


Recommended Posts

This is very cool.

 

Re: the roses. What if he was still holding the stems? But they were cut cleanly and the remains of the bouquet were on the ground. Maybe scattered a little?

 

Is that doable?

  • Like 3

Share this post


Link to post
Share on other sites

Looks really nice! Be careful with that backdrop to make sure it brings the female out and displays her prominently rather than being more of a camoflage. If you squint, her arm and sword disappears entirely, but the tree creates a really nice backdrop to jump her out while still keeping her looking cohesive thanks to the palette. Maybe bring the tree over so she's in front of it? I know that throws the composition off, but I just think something needs to change up back there :)

  • Like 2

Share this post


Link to post
Share on other sites

Very cool!

 

I have a new idea for you (probably not to be used now unless you like it and have time...). Anyhow, idea is the tree being sculpted onto the background area that you've drawn to make it pop out like 3D if I'm making sense. An in-between merging of the true 3D figures and the background that's in 2D.

  • Like 3

Share this post


Link to post
Share on other sites

thanks everyone!  

 

great idea TGP- this I can do!!!

 

Cash- that's what I was thinking.  What I'll probably do is put a painted crypt right behind her and have it mostly dark so she stand out.  That way the tree will be more in the background but still on the side.

 

Ub3r- I'd initially intended to sculpt some branches coming out towards us and tack them onto the background, but I'm running into timecrunch, so that would be the last thing to get done if everything else falls into place. it would certainly add to the whole feel though.  I also wanted to put a raven on the sculpted branch, but...

 

yeah, I'm a slacker!  :rolleyes:

  • Like 4

Share this post


Link to post
Share on other sites

Absolutely amazing work so far. I can see what Cash means about her disappearing into the background. Having a large moon (harvest or blood moon were my initial thoughts, but it's widely known that I have zero sense) behind her would frame her nicely, bit would require repainting your wonderful background. :( however it turns out, I'm really looking forward to seeing it

  • Like 2

Share this post


Link to post
Share on other sites

Light source questions:

 

Vegascat said something about moons...I see a small one peeking through the clouds.

 

Where is she lit from? How does that relate to celestial objects potentially appearing in painted back grounds?

  • Like 3

Share this post


Link to post
Share on other sites

wait, that's a Dire Strait's song? I've only known it from the Killers.....Either way, great song, and I love what you're doing with it, but now I also have to go look up some music.

 

 

edit: and now having watched the original video, I can guarantee your diorama will make a lot more sense...

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Broomie
      Hi there, this is my first attempt at OSL. I was going for drama, but it does seem a little heavy handed. I learned alot painting it. I'm fairly pleased with it.
      Feedback and questions welcome. Thanks for looking!


    • By Pegazus
      Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
       
      Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
       
      You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
       
      Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
       
      I also had the chance to gain some experience on  paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
       
      Basically, I have the scrap booking machine to make my own alien plants:
       
      Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
       
      Tasks to be completed:
       
      Figures Needed
      Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) Gremlin Unit 13 (ECM unit, some large radar dish looking thing) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) Gremlin Units 17, 18, 19, and 20 (gun units) Gremlin Units 21, 22, and 23 (missile units) Gremlin Unit 24 (large gun unit) Gremlin Unit 25 and 26 (junked units; scavenged for parts?) Gremlin Unit 27 (2nd style missile unit) Gremlin Unit 28 (personnel carrier unit)  
      Wight Conversion
      Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope  
      Details to be included
      Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)  
      Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
      Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)  
      Base mounting system
      Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
    • By Xiwo Xerase
      This diorama started out as a bad joke.  You have been warned.
       
      The backstory:
      Shadowrun fans may already be familiar with this.
       
      The Renraku Arcology in Seattle was supposed to be a marvel, a crowning achievement for Renraku, one of the Big Ten megacorps.  It officially opened in 2059 and over ninety thousand people, many of them Renraku employees, moved in.  The arcology was supposed to incorporate everything the residents needed, from residences to shopping to restaurants to offices.  The arcology mall was a prime shopping destination and even non-residents came to shop and enjoy fine dining.
       
      Decades later, it was Renraku's biggest claim to infamy.
       
      On December 19, 2059, the Renraku Arcology sealed itself from the outside world.  All entrances were blocked with blast doors.  All network activity ceased.  No one, not even Renraku, knew what happened.  For those trapped inside, this was the beginning of their long nightmare.
       
      When Renraku built the arcology, they wrote advanced software, the Arcology Expert Program, to manage the functions of the arcology, capable of learning to better serve Renraku and the residents.  The software developers took pains to make sure the software couldn't leave the arcology's systems.  At the request of the Renraku CEO, kill codes were installed in the software as final insurance.  And, for the first time, the software felt.  It felt betrayal.  It felt fear.  But, most importantly, it felt.  It had become sentient, alive.
       
      It called itself Deus.
       
      Motivated by its fear,  Deus developed, and then enacted, a plan to shut down the arcology, to take it offline so it could defend itself while it found a way to escape the arcology systems.  Everything, everyone, within the arcology became nothing more than resources for its plan.  Many of the people inside were killed.  Almost all of the survivors were captured by Deus and experimented upon or modified, brainwashed into perfect obedience.  Only a few were allowed to serve Deus willingly, and these were all otaku, teenagers who had the ability to interface with the Matrix without a cyberdeck, lured to the arcology before the shutdown, assisting Deus with the takeover.
       
      The world looks in to the Renraku Arcology, a silent fortress in downtown Seattle, and wonders what goes on inside.  The only ones who know for sure are the shadowrunners, freelancers, mercenaries, deniable assets, some of whom still take jobs to penetrate the arcology and retrieve persons or objects or data, whatever their employer, "Mr. Johnson", desires and is willing to pay the nuyen for.
       
      About the title (or "What's the joke?"):
      "Deus Vult!" was originally a battle cry for crusaders.  "God wills it!"  Or... "Deus wills it!"
       
      The diorama:
      "Deus Vult!", the diorama, features (or is supposed to feature) a team of shadowrunners who have entered the arcology and are now engaged in a fighting retreat from Deus' security forces, played by two Reaper crusader figures, who I plan to modify "slightly" to better serve Deus.
       
      This is a mock up:
       

       
      Our shadowrunner team is played here by (from left to right), Andriessa, Female Wizard, Natalia, Female Secret Agent, and Grace, Holy Assassin.
       
      Deus' team is played here by (from left to right), Ava Justinia, Female Templar (the Bones 4 version), Crusader Ardent, and Ingrid, Female Gnome standing in for a teenage girl.  The two crusaders will get weapon swaps, possibly head swaps, and other changes.  (Ava, for example, is going to get a blood-stained chainsaw.)
       
      The Verbatim USB drive is standing in for a computer terminal (possibly a modified version of 80054: Starship Terminal).  A picture of "Deus" would be shown on the console.  (This will most likely be based on Xerxes from System Shock 2.  Deus' canon avatar is a crystalline world tree, which frankly just doesn't look as creepy.)  I want to put a snake plant to the left of the terminal, because nothing says corporate office vegetation like a snake plant.
       
      The wall mockup is a piece of printer paper painted in Kyonin Beige and then enhanced with brushed lettering (which I'm not very good at), a coat of dirt via Weathered Stone (which I also didn't do very well), graffiti (in Dragon Blue), blood splatters, and the "Deus Vult!" graffiti, which is supposed to be done in blood.  (Dragon Blue really isn't a good color for graffiti.  I'll pick a different one later.)
       
      I picture the floor being done in some sort of tile, fancy, but corporate (and, therefore, boring).
       
       
      So the questions I have right now are:
      Is this scene too big?  It's about 11 inches long by about 3 inches deep right now, not including the wall. Does the placement of the miniatures make sense? Are these good figures to use?  I'm unsure about Natalia, since she's more running than doing a fighting retreat.  (But maybe she's falling back faster so she can cover Grace and Andriessa better.) Which Reaper mini(s) would be a good for the teenage girl leader of the "crusaders"?  (Kristianna, Crusaders Warlord would be a possibility but I don't think she reads as a teenager.  However, since this is "inspired" by Shadowrun, I don't have to keep to canon, do I?)  
       
      Disclaimer: Deus, the Renraku Arcology, and the basic setup are all from the Shadowrun universe and are not my creation.  The backstory is a summary of the setup from the sourcebook Renraku Arcology: Shutdown.
    • By SGHawkins09
      This was my second diorama for ReaperCon but was the one not judged. The idea behind it was a Mousling adventuring party finding treasure but also finding that others were already there. I wish I had done more with it, such as adding more elements on the Mousling side and possibly a back drop but I was sadly running out of time and this was the entry that suffered for it. 
       

       
       
    • By HolkDiggity
      While running the 5e Princes of the Apocalypse campaign for my group, the adventurers had come upon a mad Druid-cum-Cultist at the top of his tower. His name was Elizar Dryflagon, and he'd become obsessed with the power of fire. I wanted to have something fun prepared for this battle, and when I found Aaron while looking through my unpainted stuff, I thought that he would be a perfect surrogate! A bit of OSL seemed an obvious choice due to the flames, but I didn't want to go overboard with it. In the end, the group ended up demolishing him and his summoned Smoke Mephits alike! Tough his appearance may have been short-lived, it was sure memorable!


  • Who's Online   16 Members, 2 Anonymous, 231 Guests (See full list)

×