Jump to content

Figurine Came in Mail with Hands Popped Off


MarigoldtheHalfling
 Share

Recommended Posts

Last sunday I ordered Thelgar the Half Orc Barbarian figurine for my brother for our dnd group. When it came in the mail, we took discovered that the hands, which held the axe, were not attached to the rest of the body. At first we thought maybe they were to be attached, with little ball nubs or something. But when removed from the and attempted to attach, we realized that no they just somehow came apart in the shipping. I am very frustrated about the matter and have no idea what to do. I couldn't find anywhere on the Reaper Minis site to get into contact with the people who made the figurine. I'm glad my halfling came in just fine, but I'm very displeased with the fact that the Half Orc was not made well enough to handle being shipped.

Link to comment
Share on other sites

  • Replies 14
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Last sunday I ordered Thelgar the Half Orc Barbarian figurine for my brother for our dnd group. When it came in the mail, we took discovered that the hands, which held the axe, were not attached to the rest of the body. At first we thought maybe they were to be attached, with little ball nubs or something. But when removed from the and attempted to attach, we realized that no they just somehow came apart in the shipping. I am very frustrated about the matter and have no idea what to do. I couldn't find anywhere on the Reaper Minis site to get into contact with the people who made the figurine. I'm glad my halfling came in just fine, but I'm very displeased with the fact that the Half Orc was not made well enough to handle being shipped.

OFFICIAL ANSWER:  multi piece model that requires assembly, not a defect.

  • Like 7
Link to comment
Share on other sites

Most minis in that pose come like that. It would be very difficult, perhapse impossible, to cast a mini in that pose as one piece. It could also be hard to paint it with much of his chest blocked by his axe. There are lots of youtube videos that show how to assemble metal miniatures. Some resin or plastic figures can come in many pieces. Some even come with different arms, hands holding alternate weapons, or even different head options. 

  • Like 3
Link to comment
Share on other sites

If you're new to the hobby, receiving a multipart figure can be a suprise. I have some minis that are in 20+ pieces (and still just 28-35mm in scale). As said before, it makes it easier to cast. Some poses would be impossible if they weren't multi-part.

 

Do a Google search for pinning miniatures. There are many YouTube videos and blog articles on the subject.

 

And WELCOME!

  • Like 4
Link to comment
Share on other sites

Gluing and pinning can be difficult for very small pieces, but Reaper is generally pretty good about not having connection points be ridiculously small (DarkSword, I'm looking at you!) 

 

If you really hate assembly, the Bones line generally comes pre-assembled and are easier to get table-ready for new painters.  If you need any help, please take a picture or two and we'll do our best to help walk you through it.  There are a lot of tutorials here:  http://www.reapermini.com/TheCraft and in particular the first one about assembling the spider demon will show a lot of pinning of small joints. 

  • Like 1
Link to comment
Share on other sites

Welcome to the insanity.

 

I don't own the Thelgar mini, so I don't know if it'll be OK with just glue(use CA type superglue) or if you need to pin it, also.

 

Where are you located?

 

There may be someone nearby that can help you getting started with pinning Thelgar.

There's 'paint days' organised here and there, and there's a map with some of us.

(There's a Pinned thread in off-topic)

Can't hurt to ask, right?

Edited by Gadgetman!
  • Like 1
Link to comment
Share on other sites

Kurz...

03003_w_1.jpg

...is the same way. (I recently purchased Kurz, 03003.)

 

Miniatures are cast in a mold. The mold has two halves which fold together on a hinge (like one of those waffle makers at a hotel breakfast bar) and swing open to release the new figure.

 

The open area between the body, the hands, and the haft of the weapon would hook the figure in the mold if the figure was somehow all one piece. (Getting the figure out would mean tearing up either the cast figure or the mold.)

 

Also, it's easier to get in there and paint if the axe handle is out of the way. ::):

.

Edited by TGP
  • Like 1
Link to comment
Share on other sites

 

I'm glad my halfling came in just fine, but I'm very displeased with the fact that the Half Orc was not made well enough to handle being shipped.

 

There is a disclaimer on the website that the models come unassembled and unpainted. This message appears at checkout.  This was not a case of a mode being made poorly as you imply, this is a case of you not understanding what you were giving money in exchange for.

 

it's also in their FAQ.

How do I assemble them? For our miniatures that require assembly, you're going to get the best results with some metal snips, superglue (Cyanoacrylate), and a file. Just snip the bit from the sprue, file the nub down, and a little dab of glue should do it. Then prime it and start painting.[/size]

I feel like they wouldn't have an FAQ telling you how to assemble models if it wasn't pretty standard for models to come unassembled.

 

Bones are often molded in multiple pieces too; while the smaller ones frequently do come pre-assembled, I've found myself disassembling them because it's easier to paint them that way. Not sure if that's just the stuff from the kickstarters, though; it's just occurred to me that I haven't picked up anything like that from a more recent batch.

 

... but, yes. They do often come in pieces and need to be assembled. That's not just Reaper; that's pretty universal.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...