Jump to content

Recommended Posts

Hmmm trying to think of anything that others have not mentioned. 

​You could use some lining as Ive noticed especially on your goat man.  The flesh bleeds into the fur a bit.  You pick a dark brown to put in there and it will improve the contrast and pop.  However all of your pieces would benefit from a good liner wash.  (Reaper Liners are pretty good but you can use any wash for the same purpose.  You just have to be careful not to over do it.)

​Washes from Citadel are pretty good for this.  Agrax Earthshade, Reikland Fleshshade, Sepia, and Nulin Oil are the best and most commonly used. 
​To improve the goat man use the earthshade for the border then use the sepia of fleshshade for the rest. 

​I would also recommend researching a technique called glazing.  It will really help blend your color transitions.  It takes a bit of practice but it is worth it and you will see a vast improvement once you get the hang of it.  
​You already have a pretty good grasp on brush control.  That eye on the eye creature is pretty darn good. 

​Also there is a paint from citadel called Blood for the Blood god.  It dries with a shine to it.  It is by far the most realistic looking blood I've seen.  However, don't apply it until after you've mat sealed the entire mini.  Mat sealer will take away the shine. Blood splatter pattern is excellent though...well done. 

​The blonde hair on the girl It might help to add a bit of a cream color to it with yellow.  Reapers Blonde hair colors are awesome.  As it stands in the photo the hair blends too much with the flesh.  So you cant really tell it apart.  That coupled with lining will help. 

​Sorry if it seems like I'm nitpicking.  I think these are all well done.  Especially for someone who has only been doing this for a month.  I don't think it will take much for you to get really good. 

  • Like 2
Link to post
Share on other sites
  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I don't have any other advice than has already been given. These are really good. Especially the nun stands out. You have great brush control. Just need to add some more techniques to your repertory. :) 

Edited by Jaws
Link to post
Share on other sites

:p They are actually all shaded, but I think one of my biggest problems is going too light on the shading. You can almost see the nuns shading. I always forget highlights though!


Something we all suffer from.


Deeper shadows, higher highlights...

And pics don't always show the mini as if in real life...


You're doing fine, and soon you will be better, it shows you got the talent for this.

  • Like 1
Link to post
Share on other sites

Washes are like magic. Nice work though.


I like the nun, especially the detail on the rosary, revolver and her eyes.


What kind of brush are you using? It looks like you're laying down too much paint, and maybe it's messing with your ability to get finer details?


Either way, keep going!

Link to post
Share on other sites

You did all that with CRAFT PAINTS?


*Picks jaw off of floor, wipes off the dirt and puts it back where it belongs*


Generally brushes are specified as '2', '1', '0', '00', '000' or '5/0'(meaning '00000') and so on.


You should try to get hold of a good size 0 brush, and possibly a larger one, a 1 or 2.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By billeecats
      Newbie post. I've only painted half a dozen or so figures so far, but I'm enjoying myself, and that counts, right?! 
      She's painted with a mix of Reaper MSP and Vallejo Game Color. I haven't done so yet, but I think I'd like to start chronicling the colors I use for each future mini. 
      30001 Lysette, Elven Mage 

    • By haldir
      So I'm thinking of running my Virtual Expo games using this VTT. Any opinions?
    • By Asciiman
      I just got into mini painting about nine months ago, and since then I have thoroughly enjoyed it. So much more than I ever thought I would. During the summer I came across a couple of images of a fire giant that made me really want to see it at my own table. It was these two images that solidified my love for this hobby.  It was there that I was introduced to Reaper Mini, I promptly submitted an order for two of these bodyguards(and about ten others) and I have not looked back.  
      Over the last 5 months I have ordered about $300 of minis. It is becoming a costly addiction that I can't say no to. In all that time only one mini had problems, and after one short email, I had a replacement on its way. And then for today, my wife got me my biggest order yet, and it came with a bag of paints. A literal bag of paints, all of which I didn't have any of the colours. So for the quick response to my problems, the amazing looking models, and of course all the freebies, I just want to say, "Thank you Reaper Mini!".
      I just wish I had learned about this Kickstarter thing before it stopped taking orders, I want that new fire giant!

    • By [email protected]
      Started painting during the pandemic but was really intimidated by basing. Finally picked up some supplies and based my first couple models. Really improved the overall quality and aesthetic. 

    • By MusicalFeline
      So, before I go any further, I am an absolute rookie in the mini painting world. So, uh, prepare for the worst.  
      Anyways, here's a trio of Kobold leaders. Yeah, I know there's six of them, but one got lost and the other two need a good bit more work, so it's just these three for now.
      As I said, I'm completely new to this hobby, so any friendly critiques are welcome!
      I missed a couple spots on the first kobold leader's face.
      And a few other random spots elsewhere on all three.
      All of their bases look nasty...
      I didn't do their eyes, as I want to get a bit more familiar with this before I try doing something like that.

  • Who's Online   27 Members, 2 Anonymous, 21 Guests (See full list)

  • Create New...