Jump to content
Sign in to follow this  
knarthex

Oathsworn KS Freebies (Nest and Treasure pile)

Recommended Posts

So I started these to have some things not requiring a lot of fiddly work last NEMPA paint day, (19Nov) and finished them up last night.

 

The Nest:

post-14271-0-93340200-1480559464_thumb.jpg post-14271-0-04514600-1480559466_thumb.jpg post-14271-0-03574800-1480559467_thumb.jpg

I added a few small tufts of Autumn Buffalo Grass, a bit of Fine Earth Turf Flock, and some Fine Light Green Turf Flock.

 

The Treasure pile:

post-14271-0-95796900-1480559467_thumb.jpg post-14271-0-00929400-1480559470_thumb.jpg post-14271-0-81597900-1480559470_thumb.jpg

A few touches in the coins with Elven Gold...

I dumped some of the Silver colored Glass Glitter onto this to see what it would look like, But as the glitter was NOT round, it looked kinda like someone had shattered 3 or 4 mirrors onto the pile, so it was removed....

 

These wre the first time I tried out my new Warcolours paints, using Violet 5 to 1 on the 'robe'

Emerald 5 to 1 on the shield

Yellow 5 to 1 on the Feur-di-lis

and Ochre 5 to 1 on the eggs...

Very different from other paints I have used...

 

Nice fun pieces to paint!

Thanks Oathsworn!

 

George

 

WiP here

Edited by knarthex
  • Like 14

Share this post


Link to post
Share on other sites

Inarah found a cool treasure pile tip. A bag of cheap sequins from the sewing aisle.

 

At the center of each sequin is a cutout. The shiny little cutouts are usually left in the bag because it's too much trouble to extract and trash them.

They're just the size of a coin in a treasure pile and make a great way to add a little shiny glint.

Glue a few onto some of the coins and you have some instant shiny gems

  • Like 3

Share this post


Link to post
Share on other sites

They look really great, George! I'm definitely going to have to use the Warcolours Violets very soon. And I definitely need to paint an Oathsworn mini very soon as well! These look like they were fun to paint!

  • Like 2

Share this post


Link to post
Share on other sites

TERRIFIC! Both pieces painted up BEAUTIFULLY. The nest with the LOVELY speckled eggs is particularly appealing to me. OUTSTANDING WORK!

  • Like 1

Share this post


Link to post
Share on other sites

Thanks everyone!

 

They were fun to paint, and pretty stress free.....

 

Warcolours Violets 1-5 are pretty nice!

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By aku-chan
      A new Kickstarter from Durgin Paint Forge coming late September / early October.
      Wasn't a backer of the previous ones, but I don't think there's been any issues.
       
      They've been working away at this one for a while, so most of the minis have already been previewed on their blog:- https://www.durginpaintforge.com/blog/ just look for the green renders!
    • By ttuckerman
      Felicitations on your personal solstice!
    • By Glitterwolf
      https://www.kickstarter.com/projects/263291121/titancraft-customizable-boss-monsters?ref=recommendation-projectpage-footer-4
       
       

      NOTE: You can choose one demo monster ( skull or abberattion) I chose a batwinged skull and added horns to try it.
    • By Mckenna35
      Not useful for gaming, but they look like lovely painting challenges:
       
      https://www.kickstarter.com/projects/arcticencounter/adrift-and-at-peace-resin-miniature-kits-of-man-and-nature
       
      Arctic Encounter is a model displaying a traditional Greenland kayak hunter in a peaceful moment witnessing two narwhals - a mother and calf - passing by. The hunter silently observes, draws his paddle from water in order not to disturb them. The model is scale 54mm (1:32), and the kayak is about 16 cm. The whales are about 10 and 16 cm long for calf and mother, respectfully. I aim to make this as historically accurate as possible, but will take some freedom to adapt to the medium and make it visually interesting.   
      I won’t lie, there are a lot of parts. And tiny parts too. And you have to assemble harpoon, harness and bladder with wire, and lots of little bones and wire to hold everything in place. I will include a detailed instruction in kit. Don’t worry, it will be fun!    
      All the different parts of ‘Arctic Encounter’
       
      The Wanderer is a model showing a hiker on a hill with her dog, a Malinois Shepherd, resting and enjoying the view. She has a bottle of water in hand, but the set also comes with interchangable hands holding a wine bottle or a gun, allowing you to tell other stories with the model. She comes with a detailed backpack. The model is size 1:20, or 90 mm. The model comes with a large scenic round resin base. The base is about 95 mm in diameter. 
    • By AussieAusborn
      Greetings y'all!
       
      I'm starting this thread to use as a painting blog, to help catalog my journey, and to use as a source of ongoing motivation. I have a LOT of stuff I've been putting off, that I want to get through for a homebrew campaign I'm working on, and some warbands for Frostgrave, as well. So, I'll take any extra motivation I can get Once I actually finish pieces, I'll make sure to post them in that part of the forum.
       
      To start things off, I have a dragon I've been working on for a couple of weeks, and just got to the point where it's "good enough for now," although definitely not finished. It's easily my favorite piece I've ever owned, so I put off doing any work on it until I was "good enough" to do the piece justice. That is, until I realized that would never happen , so I decided to:
       
      1) Do the darned thing
      2) Do some work on it every day
      3) Push myself outside my comfort zone to try new things
      4) Be patient and forgiving with myself
      5) To not freak out when I try something that I don't like, and just go ahead and fix it
       
      There's still a good amount to do to it (I have a list with 15 bullet points on it, and growing!), but I'm happy enough looking at it, and want to take a break to focus on some other pieces.
       
      I took some progress shots (though perhaps not as many as I'd have liked). So please, join me as we journey through my learning experience:
       

       
      I fully assembled the mini before putting down any paint. Here's where the mini was after a couple days work, about 4-5 hrs. I used an airbrush to give it a zenithal undercoat with black and white, and then to lay in the base coats of the red and blue. I then painted the underbelly and the wing-fingers with a brush.
       

       
      Here, I'm trying to show the work I've done (still fairly subtle, at this point) on building up the vibrancy/transitions on the red skin/scales. I was fairly happy at this point, as I could start to see that I might actually be able to paint this to the standard I want.
       

       
      The next day, I did some work on the face, horns, and blocked in the body spikes. I generally liked the mouth and tongue, but felt it was a bit vibrant. I thought the blue on the horns was alright, but also wasn't completely sold on it.
       

       
      Here's where it was after another `30min of work. Since I felt the tongue was too much, I did something about it! I did a very light glaze with a grey, just to knock down the saturation a bit. Looks better. I added some more blue to the horns, and still wasn't quite happy with it. Picked out the teeth, which is nice, easy bit of definition. And that eye!!! It looked much better than I expected, although that's the last time it would be that well defined...
       


       
      Here it is after another couple days of progress, building up that red (it takes soooooo long on something this big!!!!), as well as more work on the mouth/face. I'd accidentally painted over the eye (which becomes a recurring theme in this tale ), so I blocked in some color, just to separate it from the face. I added a glaze of 'RMP's fair skin' to the tongue, and now I'm lovin' it. Also added some fleshy-ness to the gums on the upper jaw (though it's a little hard to tell), and that was definitely another good decision.
       

       
      Here I continued to build up the red, progress is slow but steady. Not pictured (which is unfortunate, because it was a good learning experience) is my attempt to redo the horn entirely, to a scheme that was a transition of bone to brown to black at the tip...I was really unhappy with it. I had the bone starting around the eye ridges in at attempt to add more contrast and draw the viewer's eye towards the face, but it just looked awful. So I spent a good while redoing the horn and fixing the whole face. I'm glad I made that mistake, as I think the face looks much better than it did before I started on the horn. Part of that was adding in a new level of bright highlights.
       

       
      Here's the mini in some soft lighting, and although the picture is kinda blurry, it better shows the transitions throughout the red. I think this was also the point where I started working on shading the red, by applying a light blue-black glaze to the shaded areas, which really helped add some contrast to the piece.
       

       
      I had an accident that almost gave me a heart attack, where the figure seemingly jumped off the desk Luckily, I caught it before it hit the ground, and it sustained no major damage. It did separate where the dragon attaches on to the base, and although that was a little frustrating, it ended up being a happy little accident, as it made it MUCH MUCH easier to work on the base. I started by putting down some paints and pigments, until it was at a place I thought was ok. Also, the rock spire that it's curled around was originally about 6 inches taller, which I cut off to better see all of the dragon. So, I started work on sculpting a new top. I started by building up thin layers of cardboard with superglue, to level it off (it had quite a slant to it). Then I mixed up some greenstuff, and tried to match the overall flow and texture of of the rocks. Although not a perfect match, it's close enough to not be distracting. Mission accomplished!! The pillars were a part of the mini.
       

       
      And here's the beast in its current state. I painted the newly sculpted top to match what I'd already done, and left the pillars with a super quick drybrushing. I touched up the eye to look acceptable (it's on my 'to do' list), added some grass tufts to the base, and was happy to leave it be like this, for a time. The final pic is another attempt to 'more accurately'  show the value transitions with the red, though the colors seem a tad washed out.
       
      Thanks for taking a look at my work, and for reading my ramblings! C&C is welcome  As I said, I have a to do list for the dragon, but I'm not afraid to add more to it!!! I'll strive to make a post in here a few times a week, and eventually you'll get to see a completed dragon!
       
      EDIT: I forgot to mention that once the dragon broke away from the base (super cleanly, luckily), I took the opportunity to redo the underbelly on the whole model, darkening it up some. And along the neck, I experimented with wet blending for the first time! I've been apprehensive to try it before, but decided this was a good spot to experiment, as it's a large enough area, but felt less...consequential, I guess, if I messed it up. And I'm pretty pleased with the result!
       
      Next up: Frostgrave warbands for me and my brother!
  • Who's Online   10 Members, 2 Anonymous, 37 Guests (See full list)

×
×
  • Create New...