Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MoonglowMinis
      Today I wanted to show off some cheap 54mm Vikings that I painted up as Frost Giants.

      I made these guys close to a year ago, and they were among some of the first larger sized minis I had worked on, so they're a little rough, and that's before looking at the quality of model, but if someone else is in need of a lot of giants like I was, then this might be useful to them!
       

       
      So these guys are from Tehnolog, a Russian miniatures company that I know very little about.  The minis are made out of a soft plastic like novelty toys you can buy with tickets at an arcade.  They also have abysmal detail.
       

       
      They're meant for 54mm wargaming, and I believe there's an intended game system that accompanies the line, but my goal was to get some cheap giants for D&D.
       

       
      They fit nicely on a 2in base, and could probably fit in with the smaller Reaper Bones giants, but they're definitely a little undersized.  I remedied this by giving them each a boosted base, with the leader getting two layers.  At a glance, they tower over a standard medium sized mini.
       
      The details were rough and there were some ugly mold lines here and there.  But they're serviceable.  They might work better as a half-giant if you want to use 5e's Huge Frost Giants.
       
      More pictures of each giant below the Spoiler:
       
      Tehnolog also has a few other lines of fantasy-esque minis if you're a fan of cheap minis.  I am still considering getting one of their other lines to convert into cheap-o Fire Giants.
       

       
      What's your favorite obscure miniature substitute?
       
    • By MoonglowMinis
      Hi all.  Still relatively new to the forums but I'm going to try to show off my work more often.

      I was working on an arctic campaign before the pandemic hit and had already started work on a lot of suitable minis.  Not sure when or if that game will ever resume, but in the meantime I've got plenty of minis to paint!

      This time we have the Ice Troll.  I'm satisfied with this.  Especially proud of his ice chunk.  I've never been very successful painting ice or crystals before.

      Hope you enjoy!
       

       

       

    • By BLZeebub
      So after too many years of painting with my bottles just in boxes or standing around on my shelf of shame or in various drawers, I have finally at much cost of labor made paint organizers!  BEHOLD!  I made these to hold up to 204 Reaper dropper sized bottles (Army Painter and Vallejo fit too).  They aren't the only ones I use by any means, but they're the bulk of my paint collection.
       
      Wasn't the hardest thing in the world, but honestly I might try another method if I do this again.  Right now the units are loose, probably going to lean them on the wall--eventually I would put supports on the backs so they can stand up at an angle (think picture frames).  The insane super duper bonus feature is that I can put the two together and transport, or more importantly, SHAKE all my paints at once!  The main purpose was organization though and being able to see each of my paints and, when I've organized and sorted them, see the spectrum at a glance rather than digging through a drawer as I have been doing.  For the chromophiles out there I'll post pics when they're sorted and in their proper places.
       
      To make them, I sized the bottles and figured out the hole size and spacing (bottles are about 1" diameter, I used a 1 1/8" hole saw (paddle bit blew out the back side) and drilled 102 holes (sandwiched the 3/4" boards together).  It took hours as my drills' batteries kept dying and the saw lost its good edge by the 60th holes or so.  I used the "holes" I drilled out as supports (had to chisel the middle supports in half) between the silver parts and the 5mm (yes, civilized world, in the US we know how to use proper/metric, and certain sizes of wood are specified in metric!) plywood base (black, not really visible).  I carefully glued and screwed these together.  Decided to use up some spray paint I had lying around.  Enjoy and be inspired!

    • By proggyfroggy
      Hi all, does anyone know where I could find a painting guide (PDF, video, anything really) to help me out with the Brother Lazarus Plague Doctor mini from the Dungeon Dwellers? Thanks in advance!
    • By knarthex
      So at Reapercon 2018, I scored the Duskwarden poster of Thregan Helmsplitter for my work at the auction, and of course, being the Duskwarden*, I have a couple of the minis as well.
         
       
      So I was thinking of using him as my next PC, but as I have hair, I wanted my mini to also...
      While working on another project with GS, as usual, I made to much, and decided to bite the bullet and do his hair...
      What do you think?




      Comments appreciated!
       
      George
       
      *
      Doesn't Jacob Knochengard look like me???
  • Who's Online   19 Members, 1 Anonymous, 33 Guests (See full list)

×
×
  • Create New...