Jump to content
Sign in to follow this  
knarthex

Knarthex' Frostgrave Warband

Recommended Posts

They look great! And I think that ruined building would be perfect for Frostgrave.

 

One thing though, I believe maximum warband size is 10 standard figures, and I see 11 pictured. Is one an extra spell-effect figure?

Edited by Chris Palmer
  • Like 4

Share this post


Link to post
Share on other sites

Thanks!

 

Beeker (Guy with the tuft of red hair) is an extra, but when it came time to paint up the thugs, I needed 4, and there were 5 in the pack, soooo......

 

I was a little worried about all the metal beams and such making it look out of time / place....

 

Guess I will need to build more!

Edited by knarthex
  • Like 3

Share this post


Link to post
Share on other sites

Thanks!

 

Beeker (Guy with the tuft of red hair) is an extra, but when it came time to paint up the thugs, I needed 4, and there were 5 in the pack, soooo......

 

I was a little worried about all the metal beams and such making it look out of time / place....

 

Guess I will need to build more!

 

 

We never worry about a little futuristic anachronism creeping in.  In a world of magic, especially one where Chronomancy is a legitimate practice, who knows what oddity from the future may work its way into the local architecture.  

  • Like 3

Share this post


Link to post
Share on other sites

They look great all together like that; very nice unified look you accomplished with them. Two thumbs up!!

 

And, yes those 40k ruins work fairly well as fantasy ruins, too. I believe some of those kits look a whole lot more 'techy' than some of the others; maybe avoid or minimize using them.

  • Like 2

Share this post


Link to post
Share on other sites

They look great all together like that; very nice unified look you accomplished with them. Two thumbs up!!

 

And, yes those 40k ruins work fairly well as fantasy ruins, too. I believe some of those kits look a whole lot more 'techy' than some of the others; maybe avoid or minimize using them.

I will have to look through the sprues and see what will work best for Frostgrave...

There are a lot of sprues...

  • Like 1

Share this post


Link to post
Share on other sites

Very Cool!  Thanks... that helps bring a lot of perspective to your different WIPs!

Ahh... terrain... I've got to wrap my head around how I want to do some of the ruins... 

Share this post


Link to post
Share on other sites

Very nice, they blend together well enough to look like a band, but are varied enough to be able to differentiate them easily. And the terrain works great - I didn't even notice the metal beams until you pointed it out. I suppose you could convert them to wooden beams if you were really strongly inclined. But the skulls, cold stone, gothic arches and spiky railings are what drew my eye, and they fit the theme really well.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Metalchaos
      Hi everyone, after sitting five months on the shelf, that being the projet (not me)  I finally found time to complete my Gnolls display base. The base is 7.25 inches x 11 inches wide. Here are some pictures.
      Other pictures of the Gnolls can be found here.
       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

    • By Metalchaos
      Hi everyone, here are pictures of my Gnoll hunting party. All of them are Reaper Miniatures Gnolls, painted with Reaper Master Series Paints. I added the archer's bowstring and converted two models (see last picture).
      I will now work on a display base for them.
       

       

       

       

       

       

       

       

       

       

       

    • By ttuckerman
      Felicitations on your personal solstice!
    • By Maledrakh
      It has been a while since I painted anything. A combination of my arms acting up again and my just not feeling it. Call it the recurring fallow season.
      So I am getting back on track with some Orcs.  These are partly from the first Bones kickstarter and partly from the third. All together a nice band of 10.
      There are nine different orcs that are variants made on only two basic bodies, plus a singular warchief that I think fits in with the lot of them.
      I originally based them on 40mm round bases with sloped edges, the thinner-than-citadel knockoff ones. But there was always something not quite right about them, the bases were simply too large for the minis. So off they came. I ended up with making 37mm 3D-printed ones instead. I think they fit well on these minis.

      lots of pictures below

    • By AussieAusborn
      Greetings y'all!
       
      I'm starting this thread to use as a painting blog, to help catalog my journey, and to use as a source of ongoing motivation. I have a LOT of stuff I've been putting off, that I want to get through for a homebrew campaign I'm working on, and some warbands for Frostgrave, as well. So, I'll take any extra motivation I can get Once I actually finish pieces, I'll make sure to post them in that part of the forum.
       
      To start things off, I have a dragon I've been working on for a couple of weeks, and just got to the point where it's "good enough for now," although definitely not finished. It's easily my favorite piece I've ever owned, so I put off doing any work on it until I was "good enough" to do the piece justice. That is, until I realized that would never happen , so I decided to:
       
      1) Do the darned thing
      2) Do some work on it every day
      3) Push myself outside my comfort zone to try new things
      4) Be patient and forgiving with myself
      5) To not freak out when I try something that I don't like, and just go ahead and fix it
       
      There's still a good amount to do to it (I have a list with 15 bullet points on it, and growing!), but I'm happy enough looking at it, and want to take a break to focus on some other pieces.
       
      I took some progress shots (though perhaps not as many as I'd have liked). So please, join me as we journey through my learning experience:
       

       
      I fully assembled the mini before putting down any paint. Here's where the mini was after a couple days work, about 4-5 hrs. I used an airbrush to give it a zenithal undercoat with black and white, and then to lay in the base coats of the red and blue. I then painted the underbelly and the wing-fingers with a brush.
       

       
      Here, I'm trying to show the work I've done (still fairly subtle, at this point) on building up the vibrancy/transitions on the red skin/scales. I was fairly happy at this point, as I could start to see that I might actually be able to paint this to the standard I want.
       

       
      The next day, I did some work on the face, horns, and blocked in the body spikes. I generally liked the mouth and tongue, but felt it was a bit vibrant. I thought the blue on the horns was alright, but also wasn't completely sold on it.
       

       
      Here's where it was after another `30min of work. Since I felt the tongue was too much, I did something about it! I did a very light glaze with a grey, just to knock down the saturation a bit. Looks better. I added some more blue to the horns, and still wasn't quite happy with it. Picked out the teeth, which is nice, easy bit of definition. And that eye!!! It looked much better than I expected, although that's the last time it would be that well defined...
       


       
      Here it is after another couple days of progress, building up that red (it takes soooooo long on something this big!!!!), as well as more work on the mouth/face. I'd accidentally painted over the eye (which becomes a recurring theme in this tale ), so I blocked in some color, just to separate it from the face. I added a glaze of 'RMP's fair skin' to the tongue, and now I'm lovin' it. Also added some fleshy-ness to the gums on the upper jaw (though it's a little hard to tell), and that was definitely another good decision.
       

       
      Here I continued to build up the red, progress is slow but steady. Not pictured (which is unfortunate, because it was a good learning experience) is my attempt to redo the horn entirely, to a scheme that was a transition of bone to brown to black at the tip...I was really unhappy with it. I had the bone starting around the eye ridges in at attempt to add more contrast and draw the viewer's eye towards the face, but it just looked awful. So I spent a good while redoing the horn and fixing the whole face. I'm glad I made that mistake, as I think the face looks much better than it did before I started on the horn. Part of that was adding in a new level of bright highlights.
       

       
      Here's the mini in some soft lighting, and although the picture is kinda blurry, it better shows the transitions throughout the red. I think this was also the point where I started working on shading the red, by applying a light blue-black glaze to the shaded areas, which really helped add some contrast to the piece.
       

       
      I had an accident that almost gave me a heart attack, where the figure seemingly jumped off the desk Luckily, I caught it before it hit the ground, and it sustained no major damage. It did separate where the dragon attaches on to the base, and although that was a little frustrating, it ended up being a happy little accident, as it made it MUCH MUCH easier to work on the base. I started by putting down some paints and pigments, until it was at a place I thought was ok. Also, the rock spire that it's curled around was originally about 6 inches taller, which I cut off to better see all of the dragon. So, I started work on sculpting a new top. I started by building up thin layers of cardboard with superglue, to level it off (it had quite a slant to it). Then I mixed up some greenstuff, and tried to match the overall flow and texture of of the rocks. Although not a perfect match, it's close enough to not be distracting. Mission accomplished!! The pillars were a part of the mini.
       

       
      And here's the beast in its current state. I painted the newly sculpted top to match what I'd already done, and left the pillars with a super quick drybrushing. I touched up the eye to look acceptable (it's on my 'to do' list), added some grass tufts to the base, and was happy to leave it be like this, for a time. The final pic is another attempt to 'more accurately'  show the value transitions with the red, though the colors seem a tad washed out.
       
      Thanks for taking a look at my work, and for reading my ramblings! C&C is welcome  As I said, I have a to do list for the dragon, but I'm not afraid to add more to it!!! I'll strive to make a post in here a few times a week, and eventually you'll get to see a completed dragon!
       
      EDIT: I forgot to mention that once the dragon broke away from the base (super cleanly, luckily), I took the opportunity to redo the underbelly on the whole model, darkening it up some. And along the neck, I experimented with wet blending for the first time! I've been apprehensive to try it before, but decided this was a good spot to experiment, as it's a large enough area, but felt less...consequential, I guess, if I messed it up. And I'm pretty pleased with the result!
       
      Next up: Frostgrave warbands for me and my brother!
  • Who's Online   30 Members, 2 Anonymous, 43 Guests (See full list)

×
×
  • Create New...