Jump to content

Sign in to follow this  
JackMann

Kommander Sorscha

Recommended Posts

A buddy gave me his Khador army for Warmachine. While I figure out exactly how I want to paint my stompy robots, I thought I'd paint up one of my warcasters.

 

9lKHOk1.jpg

 

The red actually fairly easy, if time-consuming. Once I started going for details, it was a little harder. I originally went with red with brown leather (now only on the gun holster), but it was looking pretty muddy. I changed it to black for the most part, but the details were really getting lost. Changing a lot of the black to purple really helped get things to pop.

 

hWTRFxW.jpg

 

I used a lot of Scale75 paints, using their red and Metal 'n Alchemy sets. The rest was done primarily with Reaper paints, with a few Games Workshop washes.

 

WY4t7BJ.jpg

 

The base was looking very plain until I added in some vegetation. I think it helped with the framing pretty well.

  • Like 13

Share this post


Link to post
Share on other sites

Nicely done, even if it is Khador.  :P  

 

Seriously though, good job on everything, and I especially like the base.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By planetmut
      Foxtrot was fun to paint. She comes with two bodies, two heads and two sets of weapons so it's possible to make her up as a crazy-haired gasmask-wearing nutter or Hasslefree's version of Furiosa from Mad Max: Fury Road. As you can see, I decided on the crazy-haired gasmask-wearing nutter.
       
      Her right hand is separate, so fun and games ensued trying to get it glued to her wrist. I didn't dare attempt to drill/pin it as there was barely enough space for the drill bit and I had visions of wrecking the metal. The stock of her AK was on the verge of falling off, so I just did away with it. Her base is the usual Liquitex modelling paste, sand and paint.
       

       

    • By cosxcam
      First real attempt at object source lighting.
       
      Model was zenithal primed and painted using glazes and inks

    • By planetmut
      It took me ages to choose a colour scheme for the Valkeeri Leader. I eventually decided on Army Painter Shining Silver to go with the whole pulp scifi theme, and VGC Warlock Purple because why not. I was worried the silver bits of her uniform would look like armour instead of metallic cloth but I think it's turned out OK. For once I managed to get her eyes to a decent standard and her hair came out looking good too. Her gun is VMC Brass, toned down with VGC Sepia Wash and Liquitex matte varnish. Her lips are a tiny dab of VMC Brown Rose.
       
      I forgot about her cape until I was finished with her, so it got a few thin coats of Warlock Purple and then began the fun and games of gluing it to the figure. Four attempts later I got it in what I hope is the right position and touched up the purple.
       

       

       

    • By planetmut
      I painted Devil Girl's clothing in Vallejo Black and thought, "God, that's boring". So I added 1/3 Vallejo Dark Prussian Blue to the black and redid her coat. Adding the blue makes the black much richer, and I washed the black over with Army Painter Blue Tone. Her skin was done with Vallejo Flat Red, Red and Vermillion. Her hair is black and drybrushed with Vallejo Royal Purple. The lava is Liquitex Modelling Paste and the slabs are just plasticard. Her eyes took FOREVER to get right, which was frustrating as hell as they're just yellow with a thin black line.
       
      The paint scheme and base are shamelessly ripped off this one by @TheOldGuard, although he/she can do OSL and I can't (and wasn't even going to attempt it).
       

       

    • By Hyjynx
      I would like to try airbrushing different sets of skin tones onto multiple copies (5+)  of the same female figure as practice and as a reference for other models. Anyone recommend a Bones fig that is large enough to have quite a bit of exposed skin, but cheap enough that lots of copies wouldn't set me back too much. Yaphima (sure I spelled it wrong) the Frost giant comes to mind first, but looking for other options
  • Who's Online   44 Members, 1 Anonymous, 187 Guests (See full list)

×