Jump to content
Sign in to follow this  
PurpleLlama

77314: Golan, Hill Giant

Recommended Posts

So this is my next model in line to paint up.  I'm hoping that this will give me some practice painting skin and faces, even though it's at a larger scale than a human sized figure.  

 

This is also my first bones model that I've started painting.  Cleaned mold lines, assembled everything, pinned it to the base and green stuffed the gaps.  Primed the base and green stuff and then I used brown line for my first coat on everything.  Other than that I threw on a thinned down coat of cadmium skin.  It will need a few more coats to cover the brown liner. I decided to get started on this while something else was drying.

 

This one will probably move slowly as I will use him to fill time while I paint a couple of other figures.

 

IMG_1367.thumb.JPG.fab32a82cb23d8a827c991ef3aadacdc.JPG

 

IMG_1368.thumb.JPG.0aa74744df78624a6b6fb06c8f67ffff.JPG

 

 

IMG_1422.thumb.JPG.440109f3b8b26c4239415434d617f100.JPG

 

 

IMG_1423.thumb.JPG.af8c065b3d7f1e1f63c762cf68701b61.JPG

 

Thabks for looking!

 

  • Like 8

Share this post


Link to post
Share on other sites

Finally had a chance to throw another 4 coats of cadmium skin on.  It looks a little better in the pictures than it does in person.  I'll probably do at least one more coat before moving on to shading.

 

IMG_1477.thumb.JPG.4bd9369f440c56d294cebc052785e714.JPG

 

IMG_1478.thumb.JPG.e3bfb7412e42ccf9e8dffe7a47b73ef3.JPG

 

  • Like 6

Share this post


Link to post
Share on other sites

Little bit more work here.  Got most of the base colors blocked in now.  Still have some areas to clean up.  Just have the metal left mostly to base in.

 

Hair is carrot top red.  I used a mixture of 6:1 leather brown to beasty brown for the couple of leather parts.  Lastly wolf grey for the fur.  After the metal is finished up I'll work on the face.

 

 

IMG_1486.JPG

IMG_1488.JPG

  • Like 6

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Darcstaar
      Well, while I let Devona dry, I’ll switch gears to a mini off the shelf of waiting...
       
      I started Kagunk, Ofre Chieftain a year or two ago.  
       

       
      The plan is for an ice ogre, with blue-gray skin.
    • By Rahz
      Another 3D print that I’m working on, this time a big one.  I’ve shoes away from buying/printing dragons for the most part as I have a ton of amazing Reaper ones still to paint (or finish... ) but this one was a freebie of sorts from one of the creators I follow on Patreon.  
       
      In keeping with my clear resin tricks, I whipped up the base really quickly and then stalled on how I was going to paint the actual dragon...  oops!  
       


       
      I masked off the crystals and plugged the holes for the feet and primed it with a mix of brown and grey Vallejo primers, drybrushed it with a tan followed by a tan mixed with white and then it got a series of Vallejo model washes (green, grey and dark brown).  I then peeled off the mask and gave the crystals a quick coat with Tamiya Clear Green.  
       
      For the actual dragon, the plan now is to paint the heavier scales like the base with the softer belly and flesh being brown.  
       

       

       

       

       
      Like my recent plague doctor bust, I masked his eyes so they will be the same green as the crystals on his base.  I toyed with putting a light in his head as well, but seems to be doing that to everything all of a sudden, and skipped it.  
       
      in case you’re wondering about the pink, that’s what mixing the Vallejo red and grey primers did. The base was that colour before the drybrush and washes. 
       
      Hoping to get some more work on the brown and get the drybrush done on his scales this weekend.  That’s going to be a lot of drybrushing!! 
       
      Thanks for looking.  
    • By Rahz
      Since apparently I am incapable of working on a single project, here is another 3D print that is presently “under the brush”.  Seemed sadly appropriate for these days.  
       
      Here he is before the cure. 
       
      a little Vallejo black primer. 

       
      Picked out the beak with Vallejo Dark Fleshtone by brush. 

       
      Went back to the airbrush and hit all the black parts with Reaper Coal Black (seriously, is there another black?!). 
      The beak then got some Reaper Rich Leather mixed with increasing amounts of Model Air Sand, focusing the lighter sand colour on top. The straps for the mask were painted with Rich Leather as well. 
       

       
      The beak then got a drybrush of straight Vallejo model Air Sand, followed by a very light and selective dry brush with Warcolours White.  
       
      The black then got a heavy dry brush of Reaper Jungle Mist.  
       
      next up will be some washes with some details being picked out and some metallic around the goggle lenses. 
       
      Thanks for looking.  
    • By elfonamouse
      Working on the Stone Giant. I'm looking for any constructive criticism but especially of the highlighting on the flesh. Not sure if I am finished or if it needs more highlights on the flesh. Everything else just is base colors and has not been worked on other than that.  He came missing the the left hand and club. 


  • Who's Online   13 Members, 0 Anonymous, 38 Guests (See full list)

×
×
  • Create New...