Jump to content
Sign in to follow this  
Cyradis

50241: Sparg, Illyrian Agent by Cyr Complete!

Recommended Posts

Alright, he's done! This little guy is a gift for my computer repairing friend, who has dealt with my computer for far too long. He's an uber nerd. 

 

I tried my hand at NMM again on the pistol. This time I didn't quite go all the way to black, sortof. I used a super pale blue-gray, then washed with black, and highlighted with ghost white. There is a wee blue part on the back of the pistol - those are my friend's initials. The figure in the store page that's painted has the hands as just hands, but I saw extra wrinkles and decided to make the hands gloved instead. Would have been too much of a pain to file them down to hands, I think. Impression I was going for with the outfit was sweater, jeans, gray coat, black gloves and boots. I considered putting 5318008 on the calculator, but my brushes complained about that, so I went with pi. 

 

Still working out the photography aspect, but these aren't too shabby. Unfortunately, I accidentally got my fingerprints all over the outer lens of my nice camera when disassembling the lighting setup after this photo >.< The lens stuck to the light ring and it was so clear that I didn't notice until I bopped it with my greasy mitts. 

 

Link to the WIP: 

 

DSC_0011.JPG

DSC_0012.JPG

  • Like 21

Share this post


Link to post
Share on other sites

Right after seeing the 3.14 which I thought was 3:14 (AM), "I'm late. I'm late for a very important date." started playing through my head.

That aside I enjoyed watching the Little Rouge evolve. The final product is a WONDERFUL creation. You have a FINE eye for colors & a deft hand with the brush. VERY WELL DONE!

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Consequence
      I have had this dragon "mini" for a while but couldn't decide on a color. I don't have a lot of green miniatures so it's now green. 


       
       
    • By Inarah
      A pair of speed painted 3d printed robots I completed during my 4th of July Paint Binge.  I found the GW Contrast paints to be very good at covering large smooth surfaces easily.  The red one was from a KS project by EC3D. (and yes, it's missing an arm) I am not sure where my husband found the other one, but maybe Thingaverse.  
       

       
       
    • By Kikkenass
      For your consideration, I present Kallaguk, Troll King. This model was painted as part of a theme back in March 2020 where green needed to be the primary color for a Twitch streamer I follow. I had a lot of fun with this one trying my best to only use various shades of green. Happy with its result. C&C welcome.  


    • By lazarp
      So this is me trying to paint non-metallic metal for the first time. The mini is one of the dwarves from thehnolog's castlecraft line. Since it is my first, I'm pretty happy with the result. I hope I'll get better at this over time. All comments and suggestions regarding NMM are welcome. Thanks for looking! 
       


    • By silentoutsidr
      Hi Everyone,

      This is my first time sharing my miniatures step by step, and excited to do so. Hopefully I can learn some things and everyone else who views the thread will learn a bit too.
      I have been looking forward to the Starcadia board game and especially painting the minis that come with it. So first up is the Weeble alien monster. I picked it for 2 reasons, 1 because it was a simple model and I wanted to try my hand at the big eye. There are 4 total Weeble models and it took about 4-5 hours to get to the point in the last photo. I decided to mimic the illustration that came on the Weeble card in the game, so I am using a similar color scheme.

      First step was prepping the model, and removing the mold lines. 2 of the 4 models had 2 bad areas on their left fin that left gaps and a rough spot. To fix it, I tried a new method, I put a little varnish on each area. If you haven't tried it, I definitely recommend it for small gaps or trouble areas that need filled or smoothed. I put a small dab on, let it dry and done, no need to pull out the putty.

      2nd step was priming. I don't like the spray can so I use gesso. It might take a little longer, but no noxious fumes and extra space needed, just brush it on and let it dry. I just spread it thin and quick most of the time, hence the streaking in the picture. The streaking never shows on a finished mini from what I have experienced.

      3 is where the fun began for me, choosing the colors and beginning to paint. My most recent elven minis, I started experimenting with different ways to do base coating and time around I am trying a colored base that is different that the final paint layer. I'm trying this out to see if I can reduce a step in my process and still get results I like. After examining the illustration, I settled on a blue-green for the body of the Weeble, and yellow for the eye. I plan on keeping with the warm yellow highlight in the front and the cold blue / purple shadow in the back. Once I decided that, I chose my basing colors, of a dark yellow brown for the front and dark blue purple for the back.

      4 with the base shadows on the model, I started working from dark to light. I mixed up a glaze of a medium green and medium purple blue. I gradually worked up the colors with multiple layers making sure to blend the colors together where the transition occurred between them. I left the eye alone, because the dark yellow brown was perfect for the yellow eye.

      5 once I was happy with the dark colors, I moved on to my mid-tones. I mixed up glazes of yellow green for the warm light and a blue green for the cold light. I took my time on this step again applying the glazes in layers to build up the color. I decided to try reflected / bounce lighting on the model, so I applied the blue green more on top of the model and the yellow green more on the bottom. I imagine the lighting being blue white (like a daylight bulb) which results a warmer reflected light in the areas not directly hit by the blue light.

      6 after a while I moved on to the eye. I continued with painting dark to light, so I chose an orange brown for the light area and the same yellow brown and dark blue purple for the shadowed area. Again I gradually applied the glazes and blended them together.

      Overall I am pleased with the direction it is going, and it is still far from done. I having gotten to the brightest highlights or even attempted the mouth yet. After that will be the finishing touches, the green slime, and scaly lumps. In the illustration the lumps are black but I don't think black will look good, any suggestions? I was also thinking of doing a slime trail, or more drool I've not done something like that before does anyone have any suggestions in the direction? Or should I not do a slime trail or more drool?






  • Who's Online   11 Members, 0 Anonymous, 35 Guests (See full list)

×
×
  • Create New...