Jump to content

Shieldwolf Miniatures

Shieldwolf Miniatures War 3

Recommended Posts

While I think that the hero_B looks good, and has a dynamic pose, the foot-on-the-stone doesn't really add anything to the figure. They could have the exact same pose with the exact same amount of movement in it without the stone. But apart from that detail I like it. The weapons look sutiable brutal for these women, too. :)

 

Furthermore, I also like the casualty. And as it is listed as _A I can only assume they have plans on a few more. These casualty figures would work in several different settings and game systems, so good stuff to include that one. :)

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, Grefven said:

And as it is listed as _A I can only assume they have plans on a few more. These casualty figures would work in several different settings and game systems, so good stuff to include that one. :)

 

I made the same assumption myself :).

Share this post


Link to post
Share on other sites
1 hour ago, Melbourne Mew Mew said:

Next stretch goal: At $35,000, the Female Space Wolves Sisters of Wolves go from 10 to 20 per box.

I'm glad i wasn't the only one thinking that.

Share this post


Link to post
Share on other sites

 

Someone should quote me if that next 35k stretch goal is met. I want the Sisters of Wolves starter army (for bits) but cost just doesn't add up for me without the 20 people per box, since I'm not a war gamer.  

Share this post


Link to post
Share on other sites
On 22/09/2017 at 3:30 PM, Paradoxical Mouse said:

 

Someone should quote me if that next 35k stretch goal is met. I want the Sisters of Wolves starter army (for bits) but cost just doesn't add up for me without the 20 people per box, since I'm not a war gamer.  

 

Sisters of Wolves are now at 20 per box (as of some time yesterday). Hope this helps to remind you :).

Edited by Balgin Stondraeg

Share this post


Link to post
Share on other sites
3 minutes ago, Balgin Stondraeg said:

 

Sisters of Wolves are now at 20 per box (as of some time yesterday). Hope this helps to remind you :).

Thanks. :) That, assuming heros are  $2.50 or so and spue minis are each $1, puts the tanks at $20 ea. for the Garrison. Def. Makes it worth it.

Share this post


Link to post
Share on other sites

Any chance of a mod putting the live link into the first post of this thread, please? I know where the current link is, but it's like a whole extra 3 or 4 clicks to get to it. (First world problems, I know.::P:)

Share this post


Link to post
Share on other sites

If you are looking at using the wolf wardens for bits, I can say that the shield maidens scale pretty well with GW bits. And look pretty good next to them. I played around with some great sword bits and they fit nicely. The maiden is a little taller than a normal GW great sword guy but not overly so. 

 

If the kickstarter gets to the paladins i will br very happy. 

051CC418-7117-4554-827B-59603A10C846.jpeg

82AFFD99-35C2-41B2-8743-9F1042719FED.jpeg

8CEFCC78-C0D0-4E2F-963F-D21DB344E891.jpeg

0C115B68-7D2E-4BE8-8EFF-A20697B26185.jpeg

1AA393CB-0A43-4771-9730-B7E451A64930.jpeg

Edited by Smokestack
  • Like 2

Share this post


Link to post
Share on other sites
1 hour ago, Paradoxical Mouse said:

I'd love to see how they scale with some reaper stuff, if any of ya'll have done that...

Sure! Here you go

707829C7-DCFC-4CB4-997B-4350B718EE7C.jpeg

Just kidding here is a couple quick shots.

CF1E736E-B7EA-43B9-BC3D-B274C598F584.jpeg

F6C11BB9-F81D-4800-BAD2-77883F35193A.jpeg

9814243C-8623-4C5B-B402-E9ED9D3BFE63.jpeg

ECE108CF-0490-429C-98EB-7FED05C26B94.jpeg

EFEA0EC3-E77E-49B6-8872-00566B57A6D2.jpeg

8C05A918-E339-4180-B86F-61E467EC93C2.jpeg

  • Like 6

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ratsmitglied
      I'm not associated with these guys, but they make some pretty good MDF terrain, and are branching out into minis
      https://www.kickstarter.com/projects/knightsofdice/mirrors-of-tullarn-28mm-fantasy-wargaming-miniatures
       
      About
      Mirrors of Tullarn is a new range of 28mm miniatures from Knights of Dice, set in a distinctive fantasy setting and cast in glorious metal!
      These characterful figures have been sculpted by Anton Ducrot (from Flytrap Factory) for tabletop miniature wargames and would look amazing in any fantasy setting, whether that is your Dungeons & Dragons or other roleplaying campaigns or as weary adventurers in your Frostgrave warbands or other tabletop games.
      We are using this campaign to fund the production molds and the initial release of 28 figures from four factions, the Anram, Tarusa, Lahari and Saresh, in glorious white-metal!  Hopefully (with your help!) we can also release a host additional figures in the form of freebies, add-ons and awesome stretch goals!
      A small band of Lahari faces of against some Saresh warriors All the miniatures have been sculpted and master molds created, we simply need the funds to make the production molds to put these figures into full production.
      With your help, we can bring these figures to market and hopefully get a good headstart on expanding the range quickly.
      The Anram defend their mountain hide-away from a marauding band of Tarusa raiders There are 8 simple pledge levels to choose from, we’ve broken them into easy to understand groups. Simply pick a pledge level, (each one represents a group of figures from the different factions), you'll then receive any FREE STRETCH GOALS unlocked during the campaign ... the more stretch goals that are unlocked, the more figures you get for free!
      A group of hired knights accompanied by their paymaster The Wanderer - no rewards, select this pledge to simply show your support!  Thank you!
      The Nomad - back the project at this level and you'll receive the Kickstarter Exclusive 'Void Witch', and gain access to the Add-ons and Stretch Goals to add more when they are unlocked. This pledge does not qualify for any free add-ons.
      Anram Nobility - receive the 7 Anram figures, all FREE stretch goals, access to Add-Ons and the Kickstarter Exclusive figure - the Void Witch!
      Tarusa Chieftain - receive the 7 Tarusa figures, all FREE stretch goals, access to Add-Ons and the Kickstarter Exclusive figure - the Void Witch!
      Lahari Seafarer - receive the 7 Lahari figures, all FREE stretch goals, access to Add-Ons and the Kickstarter Exclusive figure - the Void Witch!
      Saresh Labourer - receive the 7 Saresh figures, all FREE stretch goals, access to Add-Ons and the Kickstarter Exclusive figure - the Void Witch!
      Warlord of Tullarn - You will receive all initial 28 figures from the Anram Nobility, Tarusa Chieftain, Lahari Seafarer & Saresh Labourer  pledges.  You'll also receive all FREE stretch goals, access to add-ons and the Kickstarter Exclusive figure - the Void Witch!
      All-In! - You will receive all 28 figures from the Anram Nobility, Tarusa Chieftain, Lahari Seafarer & Saresh Labourer  pledges.  You'll also receive FOR FREE every unlocked stretch goal, add-on and the Kickstarter Exclusive 'Void Witch'!  This pledge is a little  bit of a gamble, but as the stretch goals start unlocking this pledge level really starts paying dividends!
      *25mm Round slotted base included with every miniature. 
      The masters of time, the Anram live high on the highest peaks across Tullarn Savage mountain clansmen, bent on domination and oppression! Masters of the oceans, rivers and trade the Lahari wear the finest silks and flaunt oppulent treasures Saresh tend to the fertile valleys and vast farmlands of Tullarn A true Warlord knows how to bring people together, and then pitch them at each others throat!
    • By joshuaslater
      Cool factions in this game!
      https://www.kickstarter.com/projects/1849625770/chronicles-of-the-wayfarer-heroes
    • By lannister2112
      Here is a Bones inspired kickstarter that I think my fellow painters will appreciate, a travel and display case for your mini. 
      Mini Monument 
      https://www.kickstarter.com/projects/minimonument/mini-monument?ref=nav_search&result=project&term=mini%20monument
       
      Thanks for looking! 
       


    • By SamuraiJack
      https://www.kickstarter.com/projects/elder-forge/elder-forge-tier-2?ref=discovery_category_newest
       

       

    • By SamuraiJack
      https://www.kickstarter.com/projects/cyric/second-wave-more-90mm-miniatures-from-mcc?ref=discovery_category_newest
       
      About
      Iyaxill & Gutmeg Pack Konohana e Otogi Pack Hello and welcome to our second Kickstarter ! As many of you already know our first try have failed, but we promised our friends that we will be back, so here we are, with the old 2 models and 2 brand new ones!
      Full Offer Why we are on Kickstarter ? All of the models shown already modeled and test printed, ready to go into production. We need your help for the final phase: molding, mastering, and casting runs are expensive. It would take us a lot of time to raise the funds to put  these models into production over time and we ask for funds to make all models printed and packed. We want to put these models into your hands  as soon as possible, and Kickstarter can make that possible.
       We are a group of friends from Italy, avid players of Wargames, Role  Playing Games and miniatures painting and collecting. I personally have a  miniature collection started in 1985 with thousands of pieces; maybe we  can say that we played more or less every game with miniatures of the  last 30 years… Now we want to create the miniatures we waited uselessly  for years that someone else can produce. We have had our miniatures  sculpted by some of the best artist of the world, and we will print them  on the best services on the market. We strive to give you the best of  the best service available.
      Iyaxill, Orc Champion Iyaxill, Orc Champion The Orcs are a nomadic people, and can be found nearly in all lands of Valenor (it is said that some Orcs live even in the oceans!). Iyaxill, like many Orcs, is a follower of Gharuk, the God of Fire. But his faith is so strong that he has become a Choosen of Gharuk, a priest of sort but a powerful user of fire magic.
      Casting Master Few enemies can stand before a giant Orc in full tribal armour and wielding fire as his weapon. When a Choosen of Gharuk call a tribe to war, thousands of Orcs reply to his call, hundreds of Firestone slinger pelt the enemy line with explosive stones, giant fire elementals walk at the side of priests of Gharuk trampling anything that stands before them...
      Gutmeg: Goblin Rifleman Gutmeg: Goblin Rifleman A Goblin is smaller and weaker than all other races of Valenor, and in a world where slavery is practiced the Goblin race suffered more than any other. Goblin can be vicious fighter, that use any tricks and any means to beat an enemy, but usually they get beaten back and defeated.
      When the first firearms appeared on the market, for the Goblin was an item sent from the gods. With a firearm a Goblin is the same as any other race, the Great Equalizer. Some Goblins take this to the extreme and create a real cult of Gunpowder.
      The Gunpowder Cult is a group of fanatics that revere their weapons and live only to tally how many they kills. (All non-cult creatures are fair target) some of them get the "Flamebearer" rank, like Gutmeg, to show their total dedition to the cult. Losing their weapon is the worst offense a Gunpowder Cult member can do, even if they acquire a new weapon, the old one must be handed down to a new member of the cult. To this end the Flamebeares hold their firepowder reserve stocked under a constant flame the carry on their back. When a Flamebearer fear to be defeted, he opens the flame conduit to reach the gunpowder storage, immulating himself as a living bomb.
      For our second year models we want to change our creation process, so instead of historical research and lore history we started from scratch. We put a lot of ideas on paper, burned them and start again a couple of time until we have a number of original stories and character ideas, then we contacted the great Aitor Holgado  a really talented artist to develop our ideas. He got us a lot of great miniatures ideas, and we choose two: Iyaxill & Gutmeg.
      We then give the design of Gutmeg to Alessandro Depaoli our great 3D artist, and Iyaxill to a young but talented sculptor: Ocampo Lopez Julio Cesar from Argentina !
  • Who's Online   34 Members, 1 Anonymous, 314 Guests (See full list)

×