Jump to content
Sign in to follow this  
Mckenna35

Bombshell Miniatures Morihalda bust

Recommended Posts

I've had a chunk of antler sitting in my drawer of basing materials for years, waiting for the right figure to use it on.  I recently acquired the Bombshell Miniature Morihalda bust, and inspiration stuck!  The antler was cut at a weird angle but I was able to use a hacksaw and a miter box to square off the top.  I have the dilemma of trying to figure out a) the right orientation of the bust to the base, and b) if I want to fare in the bust pedestal to the antler using green stuff.  I plan on putting a couple of pins in her base, and then matching sockets in the antler.  I figure I can blank off the top of the antler with shrink wrap and then do the sculpting work (if I choose to pursue that) which would enable me to separate them again for priming/painting purposes.  Anyway, I've come to you brave forumites for advice!  I've got four pictures attached showing the four possible orientations of the bust/antler.  Let me know which one you think is the most appealing choice!  I'm partial to #3 myself, but my wife likes #4.

Morhilda_01.jpg

Morhilda_02.jpg

Morhilda_03.jpg

Morhilda_04.jpg

MB_01.jpg

MB_02.jpg

MB_03.jpg

MB_04.jpg

Edited by Mckenna35
Added back pictures
  • Like 12

Share this post


Link to post
Share on other sites
12 minutes ago, pcktlnt said:

3 appears to be the best fit. What does the back side look like?

mighty personal question...

Edited by ub3r_n3rd
  • Haha 5

Share this post


Link to post
Share on other sites
12 minutes ago, pcktlnt said:

3 appears to be the best fit. What does the back side look like?

 

I added shots of the back in the same orientation (I think) so 1=1. etc.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Cyradis
      So I gotta say... the cast quality was so so on this. So I decided to hide that with "kinda dead". Very loosely inspired by Salem from RWBY. I put the figure down about 25% done for over a year then slammed it out in February as a "get it done" and to practice white hair before going to the next Vancouver paint club figure. Sucks that this one somehow also felt a bit like a self portrait by the time I was done. 




    • By Morihalda
      This thread is brought to you by the number 3!

       
      Table of Contents:
      - Mori Tells a Story: Below
      - Rambling, Part 3: Throughout
      - Mannequin: Completed
      - Kiara: 1: Design, 2: Workflow and Blockout, 3: Finished Blockout,
      - Amaya:
       
      2020 was STILL spent on my brain and learning, even if my hands wouldn't let me practice it.
      Between my arms getting worse and *gestures broadly in 2020,* that didn't leave much energy for socializing either.
      But now that I have fixed arms, I'm excited to pace myself get my butt into the art chair! Wooo! Nevermind, my arms are still dying and the doctor said I have to pace myself.
      As much as I would like to continue with green stuff sculpting, I just can't sculpt physically as long as I can digitally. So for now, digital practice it is!
       
      While I couldn't actually *do* anything with the information I learned over the last year and a half, I took tons of notes and tried to reread them when I could.
      I'm happy to list the videos and books if folks are interested. :)
    • By Maledrakh
      This is the "Soul Stealer" bust from Artisan Guild's welcome pack on patreon. I printed it on my Elegoo Mars Pro resin printer.
      This might be the first bust I have ever painted, not counting an Orc bust from the very early days of Forge World that I started but never finished and sold off at some point in the distant past (oh, the Folly of Youth).


      So why this newfound fascination for busts? I hear you ask.

      Well, it's the RCL again. "Bust" is a quarterly category, and since Reaper only make a very few busts, none of which are readily available at the moment (there will be a few released after Bones 5 fulfills later this year), the fine folks at Reaper have decreed that bust entries are not limited to Reaper product.

      Did I mention that the RCL has been a fun way to choose what to paint? It really helps to keep things fresh and to motivate to finish the pieces I start. And now also to paint other stuff than I usually would.

      I do not buy busts as they are generally outside my scope of interest. However, I do own one or two busts as .stl-files that have been parts of patreon bundles.
      And with such an extensive library of files at hand, once I decide to do one, it does not take long to make supports and print one off.

      But what to choose? Tentacle-face or a human face?


      Do you want to know more?

    • By Mckenna35
      Thought some of you might find this of interest:  https://www.kickstarter.com/projects/bombshellminis/isw-71b-scout-ship?ref=user_menu
       
      Available as either a physical model or STL
       
      Command power. Command efficiency. Command versatility. Command respect.
      Able to go from atmosphere to Jump in under 18 cronons. Equipped with four Ultonium-powered 418ml SXV-55 Bust-A-Drives™. Voted Starship and Pilot's Scout Ship of the Year. Available with three different equipment payloads. The fastest, safest, most versatile scout ship you will ever fly.
      The all new ISW-71B.
      Boldly go.
      ISW-71B SCOUT SHIP
      Illyrian Ship Works is renowned for excellence in both design and efficiency. The ISW-71B is no exception. It sets the new standard for classic design with modern performance.
      The Scout Ship Miniature Kit is a "game" scale multi-part model pressure cast in high quality urethane resin for easy assembly. It is sized to be compatible with most 28-35mm miniatures for tabletop battle games and RPGs.  The kit may be upgraded through unlocked stretch goals or with Add-On packs available through the Kickstarter project.
      THIS MODEL WILL BE AVAILABLE AS BOTH A RESIN KIT AND AS STL FILE DOWNLOADS.
      In the CORE SET you will get :
      1 ISW-71B Scout Ship kit Unlocked Stretch Goals The ship measures 12"/30.48cm in length overall with a 4.75"/12.06cm diameter hull and an 8"/20.30cm wingspan. It should be suitable for any scenario in the COUNTERBLAST Adventure Battle Game and will fit in on the tabletop with plenty of  scenery and vehicles for other games.
       There are two basic pledges - The Scout Ship Resin Kit which is a physical model kit that will be shipped to you once production is complete or the Scout Ship STL Digital Kit which you can download. Each kit has all the same parts and will include all of the the unlocked CORE stretch goals.
      We have also added the LANCER Backer Level. This is an a la carte level for backers who may want access to the pledge manager after the campaign ends, or may only want certain individual Add On items.
      *NOTE - THIS LEVEL DOES NOT INCLUDE THE FREE STRETCH GOAL ITEMS AVAILABLE ON THE OTHER BACKER LEVLES*
      The parts have been test-printed on EPAX X1K and EPAX E10 resin printers. All of the parts have been sized to fit on a build plate that has a 130.56mm (L) x 82.62mm (W) x 155mm (H) build volume.
      Throughout the campaign we will be sharing pics from other printers in FDM materials too.
       
    • By Lostraven
      I got this figure from an Asset Drop box. According to the accompanying documentation it is called White Mage from Lion Tower. It is a very delicate looking casting but unfortunately there were several bubble poc marks on the cloak that had to be filled and several artifacts at various locations that had to be removed. To me it has an anime vibe and used a lot of anime images from Pinterest as reference/inspiration. I had a real hard time with the face, especially the eyes due to fine features. The base is a resin Groundwerks temple base that I've had for ages.
       
       

  • Who's Online   14 Members, 1 Anonymous, 37 Guests (See full list)

×
×
  • Create New...