Recently Browsing 0 members
No registered users viewing this page.
This is my first time sharing my miniatures step by step, and excited to do so. Hopefully I can learn some things and everyone else who views the thread will learn a bit too.
I have been looking forward to the Starcadia board game and especially painting the minis that come with it. So first up is the Weeble alien monster. I picked it for 2 reasons, 1 because it was a simple model and I wanted to try my hand at the big eye. There are 4 total Weeble models and it took about 4-5 hours to get to the point in the last photo. I decided to mimic the illustration that came on the Weeble card in the game, so I am using a similar color scheme.
First step was prepping the model, and removing the mold lines. 2 of the 4 models had 2 bad areas on their left fin that left gaps and a rough spot. To fix it, I tried a new method, I put a little varnish on each area. If you haven't tried it, I definitely recommend it for small gaps or trouble areas that need filled or smoothed. I put a small dab on, let it dry and done, no need to pull out the putty.
2nd step was priming. I don't like the spray can so I use gesso. It might take a little longer, but no noxious fumes and extra space needed, just brush it on and let it dry. I just spread it thin and quick most of the time, hence the streaking in the picture. The streaking never shows on a finished mini from what I have experienced.
3 is where the fun began for me, choosing the colors and beginning to paint. My most recent elven minis, I started experimenting with different ways to do base coating and time around I am trying a colored base that is different that the final paint layer. I'm trying this out to see if I can reduce a step in my process and still get results I like. After examining the illustration, I settled on a blue-green for the body of the Weeble, and yellow for the eye. I plan on keeping with the warm yellow highlight in the front and the cold blue / purple shadow in the back. Once I decided that, I chose my basing colors, of a dark yellow brown for the front and dark blue purple for the back.
4 with the base shadows on the model, I started working from dark to light. I mixed up a glaze of a medium green and medium purple blue. I gradually worked up the colors with multiple layers making sure to blend the colors together where the transition occurred between them. I left the eye alone, because the dark yellow brown was perfect for the yellow eye.
5 once I was happy with the dark colors, I moved on to my mid-tones. I mixed up glazes of yellow green for the warm light and a blue green for the cold light. I took my time on this step again applying the glazes in layers to build up the color. I decided to try reflected / bounce lighting on the model, so I applied the blue green more on top of the model and the yellow green more on the bottom. I imagine the lighting being blue white (like a daylight bulb) which results a warmer reflected light in the areas not directly hit by the blue light.
6 after a while I moved on to the eye. I continued with painting dark to light, so I chose an orange brown for the light area and the same yellow brown and dark blue purple for the shadowed area. Again I gradually applied the glazes and blended them together.
Overall I am pleased with the direction it is going, and it is still far from done. I having gotten to the brightest highlights or even attempted the mouth yet. After that will be the finishing touches, the green slime, and scaly lumps. In the illustration the lumps are black but I don't think black will look good, any suggestions? I was also thinking of doing a slime trail, or more drool I've not done something like that before does anyone have any suggestions in the direction? Or should I not do a slime trail or more drool?
I haven't seen a lot of posts with this mini (02997, Serris, female fighter-thief), and that is a shame, because she is MAGNIFICENT. Dynamic and bold, with amazing fantasy hair and the build of a wrasslin' goddess. She's a big girl, too--even hunched over, fully 32mm from toe to top. Great value for $4.99.
Fighter-thief" is an odd designation, because she looks like a barbarian, in the Red Sonja line (or maybe one of Merida's conquering ancestors). Then again, Conan did a lot of thieving and reaving as well as slaying. She definitely has a Cimmerian torso. Lats for days.
Tried to give her a sunburnt-looking partial tan, she being a redhead and all.
Let's pit her against some monstrous opponents! My character in "Tomb of Annihilation" was a Tortle barbarian with a macahuitl named Mossback. (He venerated the ancestors, especially Great Ancestor Kawa-Bunga,) So the Spikeshells were a natural fit. I love their alligator-snapping-turtle gestalt. The word 'ornery' was MADE for snapping turtles. (and also the American badger, but I digress)
And some more shots of the swamp tortles. They were mostly contrast paints, Snakebite Leather and Gore-Grunta Fur. The green of the algae in their shell cracks is AP Disgusting Slime.
Hello all! I'm working on the blacksting wyvern from bones 4, as you can see from the title. Getting ready to start base coating some color in and noticed an area I'm not sure if it is supposed to be anatomically correct or not filled In from when made. No it does not sit on anything either that they would plug into.
Any thoughts would be appreciated!
Happy painting and stay safe!
Who's Online 17 Members, 3 Anonymous, 46 Guests (See full list)