Recently Browsing 0 members
No registered users viewing this page.
This is Reaper's 14048, Fatima, Nefsokar Cleric.
Or rather it will be when you click on the links because she's super NSFW, front and back.
CLICK HERE TO SEE THE PAINTED FIGURE FATIMA, NEFSOKAR CLERIC.
There isn't a WIP thread because I couldn't figure out how to make one that would abide by the board rules. But questions or comments are appreciated.
The images are hosted on Instagram so you can post comments there too if you like.
As commanded by the very, well, commanding @Glitterwolf, I’m going to paint this big boy. I’ve been eyeing him on the corner of my desk for months now, and to be honest I’m a little afraid of him. He’s probably going to look somewhere between terrible and mediocre by the time I’m done, but at least he won’t be grey anymore.
I’m probably going to use the airbrush that I barely know how to operate quite a bit.
I think we’re going to need a bigger brush ...
I only have up to a size 2, which I guess would be like mowing the grass with nail clippers. Should I get a size ... 4?
All are very welcome to critique/comment/heckle/throw tomatoes/etc. I need and will be very grateful for any advice and assistance I receive, but please don’t be too disappointed if it doesn’t do very much good.
Been working on a series of monster hunters from the Early Modern Era, and of course that means we need early modern monsters!
The Vampire, of course, is one of the most versatile classics. Polidori, the "Varney" authors, LeFanu, and Stoker popularized the concept and promoted the bloated varcolac or shambling nach-zerer to the aristocracy. The variety is almost infinite, but nowadays we expect them to be parasitic, narcissistic, obsessive, entitled, compelling, rule-bound, and of course, literally blood-thirsty.
Here's one such vampire, the beautiful Jahenna. Alluring, beguiling, deceptive. This is one of the crispest, cleanest sculpts I've encountered with regard to hands and hair. The conveniently-non-cruciform gravestone she's sitting on bears the legend "Mircalla RIP," a nod to LeFanu's "Carmilla" (source of the Vampire Anagram trope). The dress is very Jessica Rabbit-esque and my first attempt at fabric semitranslucency. Could probably have pushed those highlights more.
Matthias the Twisted, on the other hand, is a very different flavor of vampire. He gets the full Murnau/Schreck treatment. Grotesquerie, disfigurement, corruption, contagion. An asymmetric bogey, horrific, athirst, more rat than bat or wolf. I do love the adorable little plague rats around and on him.
By Rainbow Sculptor
Hey everyone! It's been a long while since I could post on here, I've been really busy with work. I've started a new commission piece from a client I won't name just yet but whom has given me permission to share my sketches/WIPs/ and sculpting process with you guys!
The project is to sculpt several nereids/sirens/water nymph type characters. One full body and at least two others partially submerged. They should be gorgeous and make men want to leap to their deaths so I'm avoiding any monstrous type features. Although we want them to be mostly humanoid I will be adding in some little features to indicate their magical/watery/fey nature.
Here are my initial sketches where I'm exploring posing, body types, and the kind of shape language I will want to use in the sculpts. My drawing hand was failing me today so these are REALLY rough but I got my ideas down and I'll have enough to move to the next stage which will be creating a mannequin in ZBrush.
*Apologies for the more sexual images. These aren't intended to be offensive in any way merely educational on the topic of character design*
Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
I also had the chance to gain some experience on paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
Basically, I have the scrap booking machine to make my own alien plants:
Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
Tasks to be completed:
Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) Gremlin Unit 13 (ECM unit, some large radar dish looking thing) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) Gremlin Units 17, 18, 19, and 20 (gun units) Gremlin Units 21, 22, and 23 (missile units) Gremlin Unit 24 (large gun unit) Gremlin Unit 25 and 26 (junked units; scavenged for parts?) Gremlin Unit 27 (2nd style missile unit) Gremlin Unit 28 (personnel carrier unit)
Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope
Details to be included
Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)
Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)
Base mounting system
Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
Who's Online 19 Members, 0 Anonymous, 129 Guests (See full list)