Recently Browsing 0 members
No registered users viewing this page.
By Al Capwn
I don't have a blog, and I am not veteran or post enough content to justify making one - so while these musing may be better served in that format, I will leave it here for anyone who is interested to view and chime in. It just so happens that my best friend happens to work at Rustoleum as a colorist; so lately I have been picking his brain since he has an extensive knowledge about pigments, paint make up, and the chemical intricacies therein.
As I have delved further and further into the hobby, I have been looking more into the deep subjects of color theory and how paint is made/composed. After reading James Gurney's Color and Light, as well as Michael Wilcox's Blue & Yellow Don't Make Green, I was really intrigued about what exactly paint is and how exactly color interactions work. Now I am guilty as the next person in owning WAY too many paints - not to say anything about minis!
While color mixing may seem irrelevant to some, understanding how paints function can help even those of us who own a complete gamut of convenience mixed colors. This post is about exploring more of the technical and "scientific" aspects of paint and color theory to hopefully assist others in understanding the what and why of paint.
Rethinking Paint Colors - Subtractive Color:
Up until recently, I have always viewed the primary colors as Yellow, Red and Blue, and with those you can mix secondary colors; Green, Orange, and Purple. While this is technically true after a fashion, the difficulty lies with pigments themselves. Pigments do not actually *contain* color. Instead, they absorb most of the light spectrum *except* a specific wavelength of color. As Michael Wilcox states, "Of all the pigments available to the painter, none can be described as pure in hue. There is simply no such thing as a pure red, yellow or blue paint." That means chemically, there isn't a paint pigment out there that returns a pure Red - unlike in say digital art where a specifically purely calibrated hue can be made, paint is limited by the properties of the physical pigments themselves.
As Michael Wilcox theorizes with a colour bias wheel (bottom-right), primary pigments almost certainly lean towards secondaries. This follows the concept of the Munsell Wheel (bottom-left). You may have heard of a split-complimentary color palette, and this is the reason why. Artistically, these have been described as "Warm" and "Cool" versions of the primaries, but scientifically, they are colors that absorb or reflect more of a particular wavelength. There are Violet-Reds (Cool Reds, often called "Crimson") and Orange-Reds (or Warm Reds, that lean more towards Orange), Violet-Blues and Green-Blues, and Orange-Yellows and Green-Yellows.
One the concepts to understand when mixing paints is that you are not creating a color, but rather you are effectively destroying colors and what remains is what is returned to the eye. Referencing the above color bias wheel, if you were to mix a Violet-Blue and a Violet-Red together, both containing pigment(s) that return a great deal of Violet wavelength, the little remaining Blue/Orange and Red/Green wavelengths in each pigment would cancel each other out, leaving the Violet behind. This would yield a more saturated or more pure hue of Violet. Conversely, mixing a Green-Blue and a Orange-Red ("Warm" Red) would be a very desaturated Violet, with more of a gray tone.
Keep in mind that this doesn't make a color "bad"; desatured tones by including more complimentary colors is a very useful tool! In fact, for making shadows, using a great deal of complimentary colors to desaturate is a great technique. The problem is when these colors come about unexpectedly; after all, you can have a very "intense" Red and a very "intense" Blue, but mixing them may not produce a very intense Violet if they are "moving away" from each other.
Now that is all being said, it is time to forget it...sort of. RGB is based upon the concept of Additive Mixing, or how colored light interacts. With additive mixing, fully saturated Red/Green/Blue light will produce White light. However, in paint pigments, it should be pretty obvious that mixing pigment primaries of Red/Yellow (or Green)/Blue together will not yield White. This is due to Subtractive Mixing, where pigments effectively destroy each other ala Thunderdome in Mad Max, and only the survivors reflect light back.
A more modern approach to color theory and pigments is CMYK or Cyan, Magenta, Yellow and "Key" (or commonly known, Black). Adding these colors into the standard primaries gives us the "Yurmby" wheel. If you have looked at a color printer, for example, the colors used are NOT Blue/Red/Yellow, but rather Cyan/Magenta/Yellow. This is because due to the subtractive nature of pigment/ink mixing. These colors present a larger printable gamut (i.e. range) of color; for example, without White, it is difficult to produce a Pink tone with Red vs Magenta. A thin Magenta will read more Pink than a thin Red.
Printers do not use White ink and instead leverage the paper for white, effectively printers are printing in an underpainting style. However, we as artists DO use White pigments and this makes things a bit more complicated as we do work with Tints (White) and Shades (Black).
Like most science, the direct answer regarding an accurate color wheel is: it is complicated. For observable light, there is a bit more consistency and repeatability. However, when working with "tiny wavelength absorbing/reflecting mirrors" of pigments, things become a bit more complex. Additionally, there are other aspects that that go beyond the basics, such as the effect of specular and perception of color. It gets really heady when you start dipping into Kubelka-Monk Theory and K/S.
Most paint is made up of 3 parts:
Pigment - particles that absorb and reflect certain wavelengths of light.
Binder - The 'medium' or 'glue' which holds the pigment in suspension and forms a film. For acrylic paint, this is the actual acrylic part.
Solvent - The liquid that allows paint to be viscous; as it dries, it allows the binder and pigment to harden forming the film. For acrylic paint, the solvent is water.
Adjusting the ratios of these can have some interesting, and sometimes disastrous effects in terms of the stability of the paint. For example, introducing too much solvent, and the binder and pigment lattice structure can break apart. This can cause "coffee staining" or splotchy spots where the bonds pull apart, leaving areas without a film at all.
More to come in future edits.
So my Husband needs a boat for his 4E campaign. It unfortunately cannot wait until Bones 5 delivers so I bought a paper craft boat from World Works Games. It's called The Maiden. It's HUGE. Photo from the website in spoiler. In the photo you can see a few minis placed on it for scale.
Like I said HUGE. I've done some other paper craft boats before but nothing like this. I'll be using foamcore for the base of the decks but the rest of it is card stock, transparency paper, and Uhu glue(the glue stick not the liquid-y stuff). I'm not yet sure which figurehead and props I will be using. I may just make them all and let Husband decide what he wants/needs after that.
Thankfully, this thing comes with pretty detailed instructions so it shouldn't be...not sure hard is the word I want but it's the one I'm going to use. So it shouldn't be hard, it's just up to my skill to cut, glue, and (most importantly) follow directions. It will take lots of time though I am sure of that.
I turned 30 a month ago. I celebrated it by having a game day and dressing up like an elf and going into the woods nearby-ish and do fun photos. We had fun with faerie lights. These are my favorites. Spoiled for possibly large photos.
I'll post my (hopefully) public FB album to see all of them when they are up on there.
Who's Online 29 Members, 2 Anonymous, 26 Guests (See full list)
- Xiwo Xerase
- Dilvish the Deliverer
- Reverend Shartan
- Disciple of Sakura
- Dan d'Lyon