Recently Browsing 0 members
No registered users viewing this page.
By Lidless Eye
Figured I'd put together one big thread of my recently finished 3D prints. Everything was printed on an Elegoo Mars.
Titan Behemoth from Duncan Shadow Louca:
Cyclops Behemoth, also from Duncan Shadow Louca:
A scale shot of those two, with Sir Forscale and a not-Johann the Running Man as my plastic one is broken:
Which leads into:
"You don't STINK like a peasant." "You don't DRESS like a peasant." "And you're definitely not ON FIRE like a peasant."
Fleeing Peasants off Thingiverse:
"So yeah, the treasure chest gets up and decks you."
Brawler Mimics off Thingiverse:
Vapour Snakes off Thingiverse:
Spell Effects from Vae Victis:
Cook, also from Vae Victis:
Angry Barmaid, from Titan Forge
Urd, from The Lost Dragons
So, first off, sorry if this is in the wrong category. Wasn’t sure which one to put it in, so.... Here it is.
As I’ve been painting for a while, the thought of “hey, maybe I should print my own minis” popped into my head. I pursued this thought a while, and then determined that yeah, I should probably go ask the professionals. So, here I am, rapid-firing questions like a nitwit.
First of all, what are some of the pros and cons? It would seem that it’d be cheaper in the long haul, but don’t you have to buy the 3D model as well? (But MF, you could finally make those minis you’ve made in your spare time on Hero Forge.......)... What are some of y’all’s pros and cons?
Second off, what printer? From my research, it seems that resin provides the most detail, but is more expensive, so I’d like to avoid it if at all possible. I’ve heard that the Creality Ender 3 seems to be best for the rookie on a budget (which I am in the largest sense of the word), but is it really?
Lastly, is it actually worth it in the end? In both the regards of pleasure with the final product and economically?
All thoughts and advice is needed and appreciated! Thanks, all!
By Lidless Eye
I figured I'd do one mega-gallery of the first of my resin 3D printed miniatures. All are done on an Elegoo Mars.
Oni Kyojin from Artisan Guild. My first printed, as they were pre-supported.
Rangers of Shadow Deep: Incinerator left me with a hankering for an old-school Ogre. This guy is not really a Heroquest Ogre but a 3D print from a scan of one.
Demihuman Zombies from DuncanShadow:
Kobolds from DuncanShadow:
Warforged from Fabio Schizzo:
Orcs from Artisan Guild:
An assorted collection from The Lost Dragons Kickstarter.
A Dragonborn Paladin and High Elf Druid representing my sister in law and her husband's characters for our Storm King's Thunder campaign from said assortment:
Welcome to our newest Kickstarter! You'll notice this one is a little different. In this Kickstarter we are offering the STL Files of some of our classic models for you to print on your home 3D printers. These files, created and designed by John Bear Ross, offer tons of combinations and entrance into an amazing realm of sci-fi models. These models come scaled in 15mm AND 28mm!
Now, keep in mind, these are for personal use, not for commercial or resale. We own the copyrights and designs but for the sake of this Kickstarter, we are allowing the files to go to you, our loyal supporters.
So why are we doing this Kickstarter?
Short answer…We are raising funds to increase our in-house printing capabilities. This will allow us to develop more detailed models, models in larger scales, and bring out even more product lines. Rebel Minis is growing and we want you guys to be part of it.
But we can’t do it without you, so please consider pledging, and spreading the word!
Mike and JBR
We have only one. ALL the files listed to be available for one pledged amount. You get the files to everything you see scaled in both 15mm and 28mm.
Your pledge of $40 gets the whole kit n’ caboodle. Once again, this is for PERSONAL USE! You do not have permission to distribute, copy or sell the files. *C'mon man, you know that ain’t cool!*
If we reach our goals, we will unlock stretch goals. These files will be added to the reward and download at the same time.
After the Kickstarter ends, and if it is successful, you will get a survey to confirm your email. Later, when they are ready, we will email you the links for download.
Look at all these Glorious Files, they can be yours!
Can I print the weapons and vehicles on FDM and Resin Printers?
Yes, everything should be printable on both types of printers found in common use. Most of our prints are optimized for desktop resin printers like the Anycubic Photon or the Elegoo Mars, but FDM should be able to support most builds. If we encounter files that are too large for resin printers, we will happily go back and supply sliced and optimized files to be printed in smaller chunks
Gun drones, gun carriages, and weapons. 28mm and 15mm. The Gun Carriages and brand new and have never been issued.
15mm Painted Gunbot examples Gunbots and Gun Carriages Painted Example of 15mm Scaled Gun Turret The Sci-Fi Cycle build is a Fan Favorite. Weapon mounts on each side could be scaled for a variety of weapons.
15mm Painted Examples of teh Sci-Fi Cycles With a variety of uses, The Combat Flatbed is a main stay on the future battlefield. The Hull can use the APC Treads from our other armored units, or use the original lifters as shown.
15mm Painted Examples of the combat flatbed MATVs come in both 15mm Classic and 28mm Upscale versions. Weapons turret has options for an M240G, M2 .50 Cal, M134 Gatling, and Mk47 Striker Grenade Machinegun. The MATV Truck is a new addition.
15mm Apache Painted Example MATV Breakdown The Sahadeen's ride of choice, the Gila Fast Attack Vehicle. In 15mm Classic and 28mm Upscale. Weapon modifications for a variety of scenarios.
Gila 15mm Painted example Gila Breakdown The Earth Force APC with a new grav module, treads that can also be used on the Combat Flatbed, the classic turret, and a double-barrel variant turret. There is a lot of flexibility in this model in both 28mm and 15mm scales.
15mm Painted APC Wolverine Example APC Variations APC Breakdown The Titan builds have multiple connection points to create multiple builds with the APC and the Light Tank.
15mm Titan Build (painted) 15mm Scaled Titan APC Painted Example Titan ApC Grav Build Titan Track Build Titan LTH Painted Titan LTT The Merka has been one of our best sellers in 15mm. New to this line is the battle-tank-sized grav kit has well as new small guns for the turret.
15mm Scale Painted Examples 28mm Scale Print Merka Variations Stretch Goals
Below are our stretch goals and if we reach those goals, new STL files will be unlocked! Take a look!
If we reach $2000, All Motor Pool pledges will receive the STL files for the Brand New Titan Battle Tank!
Titan Battle Tank Stretch Goal If we reach $3000, All Motor Pool pledges will receive the STL files for the Brand New Mega Merka Tank... Madness!
Mega Merka Stretch Goal!
I had a couple of merchant ships 3d printed for me and while I was at it I thought I would paint up the merchant ships I have from the old Firestorm Armada game.
So from Battlefleet Gothic we have
2 general merchants
3 container transports
4 gas transports
The 3d printing is a little too obvious for my tastes in the ship and there were just too many details for sanding or filling. I would have liked the print to be finer but this was the first time, we can see what happens in the future. Overall it was fun to rip apart all the supports and see the ship show up underneath. I am happy with the results and they will make a nice little convoy to protect for scenerios in either BFG or Firestorm or any of the other space combat games out there.
From firestorm armada we have
2 luxury liners
2 cargo transports
1 gas mining and refinery ship.
hope you like them
Who's Online 22 Members, 3 Anonymous, 49 Guests (See full list)