Jump to content
Sign in to follow this  
Cyradis

NSFW Elmore Demoness by Cyr

Recommended Posts

31 minutes ago, Mad Jack said:

 

 She really does look like an Elmore painting...

 

The concept art for her is on the Dark Sword webpage for her. Just search "Dark Sword 2008 Elmore Demoness" and it is at the bottom. Just black and white, though. The sculptor did a really good job translating her to 3D. 

 

Glad to hear I kept her Elmoriness intact! 

Share this post


Link to post
Share on other sites

Those wings...:wub: The skin tones are very nicely done and her eyes are great. There are a couple spots which appear a tad abrupt (maybe a photo/lighting artifact?) though overall smooth and subtle! Wonderful painting!

  • Thanks 1

Share this post


Link to post
Share on other sites

Thanks folks! I think this was the color combo on the wings: S75 Hykey Yellow, Reaper Saffron Sunset, Deep Red, Brick Red, and Nightshade Purple. I mixed the paints between stages (yellow + saffron, saffron + red, red + brick). I did rough smooth blending initially (no nightshade), and then highlighted and shadowed the ridges and creases with a stage brighter and a stage lower than whatever the base color in that region was, ending on the Nightshade Purple.  

 

I actually had the true base coat as S75 Hastur Purple, which was entirely too magenta for my liking so I covered it and toned it down with the other hues. Warning - the Saffron + Deep Red looks really weird as a color on the palette, but looks good in practice. 

 

2 hours ago, Sophie was taken said:

Absolutely stunning! Totally stealing those wing colors.

 

Steal away! The eyes are a combo of the Bette Davis eye model guide and Marike Reimer's guide (I put a white highlight spot on there, then put a thin red dot into that one to give it the glow). 

 

Overall, even with the wings colors, the wings really were a "add paint until I like it" sort of deal. Once I started the highlights and creases the smooth blending went out the window. If you zoom in, it is pretty easy to see brush strokes - I just was careful to place them well! 

 

15 hours ago, Mierot said:

Those wings...:wub: The skin tones are very nicely done and her eyes are great. There are a couple spots which appear a tad abrupt (maybe a photo/lighting artifact?) though overall smooth and subtle! Wonderful painting!

 

Some areas are more abrupt than others, due to the angles of the model, the lighting, and my own abilities. I took the photos using evening sun through my eastern window. It was a pain to get a photo where my phone wasn't casting a shadow upon her! 

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By 72moonglum
      Hi Reapertronics!
       
      So these are two I've been working on for the last week or so, two really small Tom Meier sculpts from Dark Sword Miniatures, ones from another post on the forum where I was complaining about eyes. Two really fun figures I think, excellently sculpted by Meier. Here's the first one:
       

       
      and a few shots of her face up close.  The eyes aren't perfect, but they turned out better than the first try before my repaint:
       

       
      and then here's the male halfling thief. He's nice and basic, with a classic old school feel. He almost gives a Bilbo Baggins type of feel to this is you ask me:
       

       
      and then here they are together:
       

       
      and to give you an idea of their size, I put them next to a few recent reaper models, a few of my favorites, the female hobgoblin archer (metal version with nose) and the other one is one of the dark gnome gals:
       

       
      So anyhoos, lots of photos, hope you enjoy!
       
       
       
    • By Kangaroorex
      Started this as a PC but the game went nowhere so he sat on my desk for quite some time.  finally got around to finishing him and thought i would share.  He's quite well detailed and has a lot of character I might get another one to try in a different color but that will be another day.  Hope you enjoy him



    • By Cyradis
      This is the end result of me trying ~2.5 sources of light for OSL. Red from magic runes below, teal from a flame in hand, and some moonlight from above.
      The character is our magic user (archivist/wizard/mystic theurge for Wee Jas), who got pretty beat up last session - but he got better. Hence title "revived". His familiar is an Aussie magpie, which was so vexing to paint, because instead of just a black bird, she has some spots. Gah!
      The character is pale, with black hair, and wears black and gray.... so I had a bit of an adventure trying to work around that too.
      The figure is a converted version of Dark Sword's Stephanie Law "Male Mage". I took it off the base and put it on a new one (I think MicroArtStudio?). I also filed off the tiny beard to make it just a little more different. I then took off the staff, and took the Bird on a Rock from that kickstarter and put it on the hand. That thing is on there with superglue, greenstuff, and prayers.
      The red OSL specifically wouldn't have been possible with my Reaper reds; that's Kimera paints. I tried Reaper Blood Red and it just wouldn't go bright enough. On the palette, it looks the same as Kimera's "The Red", but The Red is just sooooo much more vibrant. I thinned the heck out of it and started glazing it in.
       
      Weakest point I think is the bird, but eh, that's okay.
       
      Photos aren't perfect, but still better than what I used to get. Going to fiddle around with stuff again soon.
       
       









    • By Geoff Davis
      This is my diorama entry from Reapercon 2019 "Done and on to the next one".  It received silver in the diorama category and 2nd place Dark Sword Individual Figure.  The two figures are DSM7627 Female Ranger with Bow from Dark Sword Miniatures and 77189 Creature from the Blood Reef (Bones version) from Reaper Miniatures. 
       

       

       

       

       

       

       

       

       
       
      My intention with this piece was to show a dynamic interaction between the two figures as compactly as possible and with a clear indication of the action, but with enough uncertainty in the details that the observer can be lead to many different interpretations of the story.  For example, did the creature just miss her with a claw attack, or is he clinging to the rock in dying desperation while she contemptuously uses him as a launch pad?  I went through many challenges with this figure (including crushing her in transport, breaking off her arm, crushing the bow and snapping off her leg at the ankle). 
       
      Some of the detail work I did on this included:
       
      cleaning out the quiver and sculpting new arrows
      re-sculpting her chest and back to be a wool dress (the original figure has a bare stomach and back)
      adding the taught bow string using monofilament fishing line
      changing her bracer so that the buckles are on the side away from the bow string
      carving up and adjusting the creature layer by layer until he fit exactly where I wanted him (this is why I chose the Bones version - I would have found it nearly impossible with a metal figure)
       
      I am very grateful to Brice Cocanour who gave me a lot of advice on how to bring out the best look of the piece by adjusting the colour and value balance.  He was also kind enough to let me use some of his tools and his big container of water effects to fix some of the problems with the base.  Once again, I learned a ton from seeking help from the artists.  I also really appreciate the feedback I got from the judges.  As a first-timer at the MSP Open, I made some newbie mistakes that I will fix for next time, and as a long-time painter, I appreciated being told exactly where things were off so that I could reflect on them for future projects. 
       
      The judges feedback was:  
       
      They liked the tartan, the fabric texture and the colour choice.  Some of the lines on the tartan could be made cleaner.  One way to do this is to do the lines repeatedly with very thin paint.  Small mistakes are then harder to see, but the correct position of the line gets hit repeatedly making the  visual appearance of the lines neater.  Another suggestion was to map out the tartan pattern in light grey first before adding any colour.  Use pure white to make landmarks at the intersection points of the lines which are bright enough to show through the subsequent paint layers.  This helps to make the layout of the pattern more precise and less risky.  Because the pattern is laid out before any colour is added or a lot of work is put into highlights and shading, any mistakes in the layout can be corrected without having to do a lot of repair work.
       
      Overall composition was good with the story being very clear with the construction being very tight and kept to the essentials (no wasted space and unnecessary features).
       
      They liked the overall skin tone and highlight placement to focus attention on her face.  They pointed out where improvements were needed to some of the blends on the skin, specifically on her calf where some of the shadow, dirt and highlight blends are misaligned or too abrupt and not bright enough (her ankle for example needs to be a bit brighter).
       
      The final surface texture of her skin could have been smoother. Suggestions for this included using brush-on sealer to smooth out flaws, paying close attention to cleanliness of the figure (eg large dust particles) and removing them as soon as they are found, then filling the craters and smoothing their edges, and glazing additional layers of the mid-tone to smooth out some of the edges of the blends. 
       
      Clean up the water effects where they meet the base to give a crisper line between the action and the base. 
       
      It was recommended to mount the diorama directly onto the wooden plinth if possible rather than on a gaming base attached to the top of the plinth. 
       
      The judges scores were 3, 3 and 4 for 10/12 (Silver).
  • Who's Online   8 Members, 0 Anonymous, 55 Guests (See full list)

×
×
  • Create New...