Recently Browsing 0 members
No registered users viewing this page.
By Colonel Kane
Mods if this is not acceptable please feel free to delete.
I started a new project. last week. I bought the mini at a game store that I go to to paint with Ludo. I had another friend give me more minis... so I am turning this what was going to be just the one, into an army. I am still working on this one, but I thought you all might like to see it.
Anyways here is the Commander:
Down Under We Are Behind
A couple of months ago the Mortal Realms magazine finally got to Australia. Near that period of time I also brought some Wargames Atlantic skeletons. Now that it is deadcember, I decided to post some of the figures I have painted.
GW: Stuff I already had
I had these GW models from when they came out, (also have the wraiths, which are 90% finished, so hopefully I should post them in the future).
GW: Mortal Realms 1 (Chain Rasps)
Being in Australia, where chain rasps cost 70AUD for 10. The first issue of Mortal Realms (6AUD for Chain Rasps and SigMarines). Well it was hard to pass up on the value, especially since I do enjoy the chain rasp aesthetic. This were speed painted with oils. So that was a nice experience. The painted wanted to wipe itself off, but it was a lot faster than if I did it with acrylics.
Now the chain rasp kit has one option for one of the ten chain rasps. Yes, it's insane how much it costs for such a limited kit. I know it is push fit, but so are the Sigmarines and they come in the same size of sprue. So being left with one nice large piece, I decided to modify the figure. Using green stuff I sculpted some robes, one hand and the weapon. A paperclip acted as arms and weapon shaft.
Wargames Atlantic: Skeleton Archers.
The variety of bits on the sprue is quite nice, sadly there is only enough bows to make 8 bowmen. And the weapon variety can be said to be lacking (e.g. only ancient greek weapon, and one helmet option). I am sure you could modify some of the spears to make a long bow, but then you would be either missing some arrows or a quiver. I decided to make the maximum amount the box permitted. The helmeted head is the unmodified version from the sprue.
Wargames Atlantic: Javelins
There was some modification on the javelins, spears. I followed a guide that was advertised on the Wargames Atlantic site. I did go a little further, by cutting one spear in half and passing both halves onto a shield arm (figure pointing). All the shields are freehand, and based on some website that had designs that were broken down by time period (I think, they were from vases or murals).
Wargames Atlantic: The pike, that has a special name. I forgot said name.
I may have put the shields with the semicircles missing, the wrong way around (got confused with a different shield). I noticed this too late, and did not want to modify the figures or repaint the designs. Once again he helmet is the one from the sprue. There are only eight of the pikes on the sprue, but in the end I decided to have only 6 figures hold them. The reason will become apparent later.
Wargames Atlantic: Heavy Spears.
Now, I started doing some modifications. The spear arm of the horn blower was heavily modified, including the cutting of a thumb and using a bit of cut off sprue to make the proper one (to make it a left hand). All but the helmet of the sword wielder are the modified versions from sprue (with the decorations being either fully removed or modified, all the decoration types were based on some helmets I found on the internet).
Wargames Atlantic: Dancing Devils
Now, I was a little bored of making just skeletons. The kit comes with eight ram skulls. I decided to use 6 of them to make some devil figure, I decided to make them look like if they were dancing. Furthermore, to make them more devil like, I decided to give some of them amazing decorations. This is where the cut of pieces from the helmets became useful. In the end I was going into more of the medieval dancing skeletons.
December has only just begun but this year's ornament is already finished. Unlike previous years I decided to wait until the piece was finished rather than run a WIP thread. With the little one being a lot more involved this year it certainly made things easier. Our daily progress was also lower too as you can only keep a two and a half year olds attention for so long.
Starting out I knew I wanted the little one to be more involved this year. Plus she's certainly been showing more and more interest in what I've been doing at my desk lately. With a bit of thinking and planning (something we all know I usually avoid) I came up with a concept that would give her a lot of "big" areas to paint unlike my other ornaments which were just little figures that require "precision".
That's right I really did plan this build. As you can see I'm no artist but it does show off the concept. My plan was simple enough, I'd build a small rooftop complete with a "Santa" that would fit inside an ornamental bulb.
Using plasticard I made a roof and chimney that fit snugly inside the bottom/lid of the ornament. I added the appearance and texture of bricks to the chimney using thin squares of cardboard. For the figure itself I simply used a GW necron I had leftover from an earlier project and with some greenstuff I sculpted a hat and toy sack. Lastly I covered the lid with masking tape and primed it.
Once it was primed and ready for paint I could finally get the kid involved. With a bit of brush assistance from myself we quickly found our rhythm and started painting together. Unfortunately there are not a lot of progress shots. Most days I just completely forgot to take one and on others the little one was just so excited to keep going. I did get one after we finished the chimney's basecoat however.
After that we painted the roof, the toy bag, the red portion of the hat, and the silver metallic. The white of the hat I did myself at one point while she napped.
So far she had really been enjoying the project and seemed to like painting together but I was not prepared for how much she loved applying the wash. I'm not sure what it was but she really liked splashing the dark wash over everything. I guess dirtying up a model is just satisfying.
After that we applied a little drybrush to the bricks. Everything was nearly finished but the fine details remained, so alone I quickly painted the eyes, chest, and the Christmas lights. After applying a bit of snow flock our ornament was complete.
In retrospect the "lights" were a little too close together on the back, but as it only truly obscured my name it wasn't worth redoing.
We put the bulb back together and hung it on the tree. I think it doesn't look too bad. It's certainly an improvement over the previous years, almost as if my skills have improved.
Happy holidays everyone.
Every Infernal Army needs its footsoldiers. Today I have Legion Devils, or Merregon as they are known in 5E. There's a lot of variation in lore with these guys between editions, so it really opened up the door for interpreting them how I wished. So here's a handful of Legion Devils.
Not the most impressive of paintjobs, but they work for filling out a horde. I am interested in revisiting them with my more recent TMM painting technique, so maybe I'll add to their ranks soon.
More Photos Below Spoiler:
I really like reinterpreting the creatures that exist in D&D lore. I have all of the models, and more that I want, and it's nice finding ways to utilize the ones I didn't have a use for. I also love seeing a group of cohesive minis coming together. What else does my infernal army need?
At the moment I'm not exactly starved for projects (I've actually got a long list taped to my desk), but what I really wanted was something quick and easy. Luckily one of the projects on that list fit the bill perfectly so my third Imperial Guard joke squad has started.
Unlike my "Fabulous" squad or even my Tau defectors this is a more nuanced joke. Instead of painting battle hardened Cadiens I'll be painting a squad of the Planetary Defense Force. GW lore is a funny thing whenever comparisons are made as any player can tell you. So while the Imperial Guard especially the Cadiens are "elite" warriors completely at home on the battlefield the Planetary Defense Forces are easily killed cannon fodder living the cushy good life on Imperial worlds. The PDF act as peacekeepers and the first line of defense during any attack and they usually end up dying in droves (not unlike the actual Guard).
The only real difference at least on the actual tabletop will come down to color scheme. I've decided a peacekeeper's color scheme would work well and I've come up with two options.
I think I prefer the blue tunic with the grey armor, but the reverse could work too. I figure I'll just sleep on it and decide tomorrow with fresh eyes, but I'm open to any thoughts/ideas.
Who's Online 19 Members, 1 Anonymous, 47 Guests (See full list)