Jump to content

beefcake

The Wizard's Tower - printable STL files - Modular tower system

Recommended Posts

Hi all, 

 

I feel a bit bad that this is my first post here on Reaper Forum advertising a kickstarter. I used to go by the Moniker Kaybee or Kaybee81 (can't remember) but as I'm known as beefcake on other fora I thought it best to go by the same name everywhere. Anyway here is a link to some STL files for purchase.


43474756741_260252611b_z.jpg

The Wizard's Tower contains stackable tower sections to create your own unique Wizard's Tower. 

Files have been scaled for 28mm miniatures but, as with all 3d printable files, you have the ability to scale them up or down to suit your gaming needs.

The initial reward consists of 7 different modular tower pieces and a ladder. All of which have been created on Blender, run through a repair tool, to check for any non-manifold parts and other errors, and printed.

  • [li]Tower roof[/li]
    [li]Single window tower section[/li]
    [li]Tower section with door[/li]
    [li]Tower bridge (2 bridge sections link together)[/li]
    [li]Double window tower section[/li]
    [li]Windowless tower section[/li]
    [li]Tower base[/li]
    [li]and a ladder[/li]


[/li]
[/list]

All for NZD $10 (roughly USD $6.80)

 

The tower pieces can be oriented in almost any direction to provide a different look each time you game.

https://www.kickstarter.com/projects/1173449368/the-wizards-tower-3d-printable-modular-tower-syste

  • Like 2

Share this post


Link to post
Share on other sites

I like how this tower can be stacked from a hut up to the heavens. It needs a telescope option through the roof though. 

Share this post


Link to post
Share on other sites

Thanks I thought I recognised your name (You are on LAF as well correct) I did think about a telescope. Trying to make things very generic to begin with. Maybe I;ll look into that as an extension. I'm thinking of making loads of little bits that can attach on to this. But to be honest to make the telescope look best I would just  create a new roof option. Otherwise it could be quite tricky to attach it on. That wouldn't actually be too difficult as well, just amending the current file. I'm also thinking of making the $1000 stretch goal having 2 files. One that is accessible through the bridge option.

The smaller prototype I have is currently stacked 9 high (with 2 bridge sections leading nowhere) it is quite impressive.

Edited by beefcake

Share this post


Link to post
Share on other sites

This looks interesting & cheap enough to jump in. Hope we can get the stretch goals.

 

*Now need to get the printers back into operation.* 

Share this post


Link to post
Share on other sites

Thanks. I decided to go for cheap. I often get put off by expensive STL files however nice they look.

It looks like we will get that first stretch goal in the next couple of days. At the moment I'm working on the second update with the first of the 5th day freebies. In fact I'll post this after I send out the update so I can link it in. :)

https://www.kickstarter.com/projects/1173449368/the-wizards-tower-3d-printable-modular-tower-syste/posts/2240987

 

Share this post


Link to post
Share on other sites

Second Stretch goal achieved. The Arcane Summit is now opened up to The Wizard's Tower pledges.

Only a few days left. If we can make the final stretch goal then we will get up to 17 files out to backers for around £5 or $6.75 (Which is $10 NZD)

https://www.kickstarter.com/projects/1173449368/the-wizards-tower-3d-printable-modular-tower-syste/description

Edited by beefcake
  • Like 1

Share this post


Link to post
Share on other sites

Lol. Thanks.

My philosophy is that STL files should be cheap. People spend so much money on the machine and then there are the consumables... You shouldn't have to pay $15+ for a building especially when there are very little other costs involved to the distributors of the files (i.e. no casting etc)

 

  • Like 1

Share this post


Link to post
Share on other sites

An expansion for this will be up and running tomorrow. It will include a bridge for the tower along with a sacrifical set and also a bunch of extra bridge pieces.

 

7cf42103e873e87488fcf163f7d487f0_original.jpg

Share this post


Link to post
Share on other sites

This thread is being locked down as fulfilment of the original kickstarter looks to be completed.

If a new kickstarter is being launched please start a new thread for it.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/263291121/desktophero-free-3d-printable-character-maker?ref=nav_search
    • By haldir
      https://www.kickstarter.com/projects/266656159/bestiary-3d-printable-models
       
      As I backed Brayan's previous KS but never got my files (I got a email in regards to this KS) but a quick email response & I had my file that I backed + a bonus file. Love the look on the minis. The goblins can be new PC gobs for ReaperCon We Be Goblins. Love the Oriental dragon as well.
    • By Talae
      The Stygian Depths - Lost Temple of Xibalba, via @Kickstarter https://www.kickstarter.com/projects/524168246/the-stygian-depths-lost-temple-of-xibalba
    • By TDG
      Hello guys hope all are well, I'd like to show you my project for 3D printable miniatures that I have just launched;

      https://www.kickstarter.com/projects/568025447/3d-printable-miniatures-for-tabletop-and-rpg-games?ref=9faem8
       
      They are a selection of 6 models inclduing a Dragon, Drake and Kirin with a forest/woodland theme along with a Dragon head dice tower, all the best guys



    • By Lidless Eye
      Seeing as there wasn't a thread yet, I wanted to share another project that just hit Kickstarter, "DEPTHS OF SAVAGE ATOLL"

      It's a great project I was happy to be involved with, doing some of the FDM print testing.  Everything looks great and prints well!

      https://www.kickstarter.com/projects/ecaroth/depths-of-savage-atoll-3d-printable-tabletop-model/description
      Welcome to "Depths of Savage Atoll" - an island chain on the edge of the world where the currents of the ocean, waves of the sea, sands of the beaches, and old-growth of the jungle are all teeming with life, adventure,  and countless dangers.
      Enrich your tabletop RPG or wargaming experience with 3D print-ready minis, monsters, terrain, and buildings from island, nautical, and undersea environment.
       
      This Kickstarter provides character minis, monsters, scatter terrain, buildings, and more for you to produce at home on your FDM or resin 3D printer. Rewards are for digital STL files to print the products shown and described in this campaign. Rewards are split into two categories: Scatter, and Minis - designed to be used together or independently, and all for normal tabletop gaming scale (28-32mm).
       



       
       
       
  • Who's Online   28 Members, 1 Anonymous, 214 Guests (See full list)

×