Jump to content
Sign in to follow this  
Orlando_the_Technicoloured

Corvus Corax Miniatures - Onwards

Recommended Posts

https://www.kickstarter.com/projects/831472366/corvus-corax-miniatures-onwards?ref=hero_thanks

Corvus Corax Miniatures is a small hobby project created in 2013. Since then, I have had three projects successfully funded on Kickstarter and all have been fully delivered on time without any delays. The feedback from the backers have only been positive.

The Funding Goal is for 50,000 SEK (Swedish Crown) which equals aprox. $5,700, €4,800 or £4,300 (exchange rates may vary, please check your current ones).

The goal of this project is to attempt to raise funds for the production of totally 12 miniatures; six for the Clansmen of Caer Loch and six for the Sons of Yetl Black. The miniatures will be cast in high quality, non-toxic, resin. The scale of the miniatures are 35 mm (measuring to the eyes in a standing, straight pose, although some characters can be slightly larger because they are supposed to be large characters).

The miniatures have already been sculpted and pre-production resin casts have been completed and approved for final production if the funding is reached. A successful project here will help me be able to pay for the resin casting, and it will help me to kickstart the miniature range and expand it even further!

4f3199a8770f8b930cbf72d263006cf6_original.JPG?ixlib=rb-1.1.0&w=680&fit=max&v=1509219243&auto=format&gif-q=50&q=92&s=fdb2aee8f3beb131bfd7c39238666aab

253b73f3de6402a7f6319b6bac8d74ab_original.JPG?ixlib=rb-1.1.0&w=680&fit=max&v=1509219255&auto=format&gif-q=50&q=92&s=6b1169184cde9859ad9aa92d3159c980

you can also pick up stuff from the previous project

f113420fabcf96d6a978842f7846d4fa_original.jpg?ixlib=rb-1.1.0&w=680&fit=max&v=1509642442&auto=format&gif-q=50&q=92&s=360ef8917bd6c0ac4cb3fd197616106d

f437c2a6d292232aa202f18d11cde38b_original.jpg?ixlib=rb-1.1.0&w=680&fit=max&v=1509647916&auto=format&gif-q=50&q=92&s=e19a027a8bfdae4d79581882a74a22f6
size/scale comparisons

Typically, the estimated shipping cost break down as following (however, note that this is a rough estimation, and that the shipping cost will be based on the weight of each package, which might differ depending on which miniatures and how many you choose to select). The following is only ESTIMATED and does not mean that it is final.
•1-4 miniatures: €5
•5-12 miniatures: €10
•13+ miniatures: €15

This does NOT include tracking. If you want to include tracking (recommended letter) that will cost an extra €10 in addition to the shipping cost (for example, the estimated shipping cost for 12 miniatures with tracking would end up at €20). The insurance for recommended letter is at max value of 2,000 SEK.




I've backed and got the minis from all of the previous project and have been delighted with them

  • Like 1

Share this post


Link to post
Share on other sites
On 10/1/2018 at 9:10 PM, pcktlnt said:

Hate you all. *takes a look*

 

You know you want some of these. You even know you need some of them. You can't resist it. There is no point even trying.

  • Like 1

Share this post


Link to post
Share on other sites
2 hours ago, Shpam said:

I’m surprised that Kickstarter doesn’t have more success. Those Native American guys look terrific... 

I agree.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By aku-chan
      A new Kickstarter from Durgin Paint Forge coming late September / early October.
      Wasn't a backer of the previous ones, but I don't think there's been any issues.
       
      They've been working away at this one for a while, so most of the minis have already been previewed on their blog:- https://www.durginpaintforge.com/blog/ just look for the green renders!
    • By Mckenna35
      Not useful for gaming, but they look like lovely painting challenges:
       
      https://www.kickstarter.com/projects/arcticencounter/adrift-and-at-peace-resin-miniature-kits-of-man-and-nature
       
      Arctic Encounter is a model displaying a traditional Greenland kayak hunter in a peaceful moment witnessing two narwhals - a mother and calf - passing by. The hunter silently observes, draws his paddle from water in order not to disturb them. The model is scale 54mm (1:32), and the kayak is about 16 cm. The whales are about 10 and 16 cm long for calf and mother, respectfully. I aim to make this as historically accurate as possible, but will take some freedom to adapt to the medium and make it visually interesting.   
      I won’t lie, there are a lot of parts. And tiny parts too. And you have to assemble harpoon, harness and bladder with wire, and lots of little bones and wire to hold everything in place. I will include a detailed instruction in kit. Don’t worry, it will be fun!    
      All the different parts of ‘Arctic Encounter’
       
      The Wanderer is a model showing a hiker on a hill with her dog, a Malinois Shepherd, resting and enjoying the view. She has a bottle of water in hand, but the set also comes with interchangable hands holding a wine bottle or a gun, allowing you to tell other stories with the model. She comes with a detailed backpack. The model is size 1:20, or 90 mm. The model comes with a large scenic round resin base. The base is about 95 mm in diameter. 
    • By AussieAusborn
      Greetings y'all!
       
      I'm starting this thread to use as a painting blog, to help catalog my journey, and to use as a source of ongoing motivation. I have a LOT of stuff I've been putting off, that I want to get through for a homebrew campaign I'm working on, and some warbands for Frostgrave, as well. So, I'll take any extra motivation I can get Once I actually finish pieces, I'll make sure to post them in that part of the forum.
       
      To start things off, I have a dragon I've been working on for a couple of weeks, and just got to the point where it's "good enough for now," although definitely not finished. It's easily my favorite piece I've ever owned, so I put off doing any work on it until I was "good enough" to do the piece justice. That is, until I realized that would never happen , so I decided to:
       
      1) Do the darned thing
      2) Do some work on it every day
      3) Push myself outside my comfort zone to try new things
      4) Be patient and forgiving with myself
      5) To not freak out when I try something that I don't like, and just go ahead and fix it
       
      There's still a good amount to do to it (I have a list with 15 bullet points on it, and growing!), but I'm happy enough looking at it, and want to take a break to focus on some other pieces.
       
      I took some progress shots (though perhaps not as many as I'd have liked). So please, join me as we journey through my learning experience:
       

       
      I fully assembled the mini before putting down any paint. Here's where the mini was after a couple days work, about 4-5 hrs. I used an airbrush to give it a zenithal undercoat with black and white, and then to lay in the base coats of the red and blue. I then painted the underbelly and the wing-fingers with a brush.
       

       
      Here, I'm trying to show the work I've done (still fairly subtle, at this point) on building up the vibrancy/transitions on the red skin/scales. I was fairly happy at this point, as I could start to see that I might actually be able to paint this to the standard I want.
       

       
      The next day, I did some work on the face, horns, and blocked in the body spikes. I generally liked the mouth and tongue, but felt it was a bit vibrant. I thought the blue on the horns was alright, but also wasn't completely sold on it.
       

       
      Here's where it was after another `30min of work. Since I felt the tongue was too much, I did something about it! I did a very light glaze with a grey, just to knock down the saturation a bit. Looks better. I added some more blue to the horns, and still wasn't quite happy with it. Picked out the teeth, which is nice, easy bit of definition. And that eye!!! It looked much better than I expected, although that's the last time it would be that well defined...
       


       
      Here it is after another couple days of progress, building up that red (it takes soooooo long on something this big!!!!), as well as more work on the mouth/face. I'd accidentally painted over the eye (which becomes a recurring theme in this tale ), so I blocked in some color, just to separate it from the face. I added a glaze of 'RMP's fair skin' to the tongue, and now I'm lovin' it. Also added some fleshy-ness to the gums on the upper jaw (though it's a little hard to tell), and that was definitely another good decision.
       

       
      Here I continued to build up the red, progress is slow but steady. Not pictured (which is unfortunate, because it was a good learning experience) is my attempt to redo the horn entirely, to a scheme that was a transition of bone to brown to black at the tip...I was really unhappy with it. I had the bone starting around the eye ridges in at attempt to add more contrast and draw the viewer's eye towards the face, but it just looked awful. So I spent a good while redoing the horn and fixing the whole face. I'm glad I made that mistake, as I think the face looks much better than it did before I started on the horn. Part of that was adding in a new level of bright highlights.
       

       
      Here's the mini in some soft lighting, and although the picture is kinda blurry, it better shows the transitions throughout the red. I think this was also the point where I started working on shading the red, by applying a light blue-black glaze to the shaded areas, which really helped add some contrast to the piece.
       

       
      I had an accident that almost gave me a heart attack, where the figure seemingly jumped off the desk Luckily, I caught it before it hit the ground, and it sustained no major damage. It did separate where the dragon attaches on to the base, and although that was a little frustrating, it ended up being a happy little accident, as it made it MUCH MUCH easier to work on the base. I started by putting down some paints and pigments, until it was at a place I thought was ok. Also, the rock spire that it's curled around was originally about 6 inches taller, which I cut off to better see all of the dragon. So, I started work on sculpting a new top. I started by building up thin layers of cardboard with superglue, to level it off (it had quite a slant to it). Then I mixed up some greenstuff, and tried to match the overall flow and texture of of the rocks. Although not a perfect match, it's close enough to not be distracting. Mission accomplished!! The pillars were a part of the mini.
       

       
      And here's the beast in its current state. I painted the newly sculpted top to match what I'd already done, and left the pillars with a super quick drybrushing. I touched up the eye to look acceptable (it's on my 'to do' list), added some grass tufts to the base, and was happy to leave it be like this, for a time. The final pic is another attempt to 'more accurately'  show the value transitions with the red, though the colors seem a tad washed out.
       
      Thanks for taking a look at my work, and for reading my ramblings! C&C is welcome  As I said, I have a to do list for the dragon, but I'm not afraid to add more to it!!! I'll strive to make a post in here a few times a week, and eventually you'll get to see a completed dragon!
       
      EDIT: I forgot to mention that once the dragon broke away from the base (super cleanly, luckily), I took the opportunity to redo the underbelly on the whole model, darkening it up some. And along the neck, I experimented with wet blending for the first time! I've been apprehensive to try it before, but decided this was a good spot to experiment, as it's a large enough area, but felt less...consequential, I guess, if I messed it up. And I'm pretty pleased with the result!
       
      Next up: Frostgrave warbands for me and my brother!
    • By Darcstaar
      Starting up another, now that Janan is done.
      Satheras, Male Warlock.  He had a really bent staff.  On the behind shot you can see I cut it off at the hand, wedged a bit out and re glued it into a straighter angle.  I also cut him off his integral base, since it had no texture.
       



      Hoping to try to get a little better at OSL on him, with a green gem in the staff.
    • By NecroMancer
      https://www.kickstarter.com/projects/859512613/the-sentinels/description
       
      Probably a pass for me as these are a little expensive and not my style.  However, having backed other Ouroboros projects I can tell you their work is outstanding and they deliver on time 
  • Who's Online   14 Members, 1 Anonymous, 36 Guests (See full list)

×
×
  • Create New...