Jump to content

Impact Miniatures Chibi Siblings of Conflict

Recommended Posts





The siblings  of conflict are here!

Attack! this interstellar army of hardboiled girls are ready to conquer your tabletop! Assemble unique squads with powerful weapons, led by brave leaders. They're cute, they're rowdy, they are the siblings of conflict!



We're planning amazing, unique hero characters, and more! Surprises await! New Stretch Goals will appear as the campaign advances!


Chibi miniatures!

Chibis are adorable characters that have lately have made a splash in the boardgaming and miniature community with games such as Super Dungeon Explore, Arcadia Quest, Ninja All-Stars and many others. They're also featured in collectible figurines and in other geeky paraphernalia.

This is the NINTH Chibi KickStarter run by Impact! Miniatures and Impact! is partnering with  Märchen to bring you some incredible, new Siblings of Conflict chibi miniatures along with sci-fi allies & enemies for them to combat!

The funding goal will pay for the sculpting & 3-D printing of the miniatures.

 The Miniatures    

ALL miniatures in this KickStarter are provided unpainted. Unless otherwise stated after the name of the miniature, all miniatures offered with this KickStarter will be high quality 3-D prints done on a top end 25 to 50 micron printer (you should not see print lines after priming and paint).   As stretch goals are reached we will unlock additional sculpts.  The miniatures will require light clean up, being primed before painted and might need some assembly (although we will do our best to keep the figures with as few pieces as possible).  

You can use your reward dollars to get any of the miniatures in the listing above.

Miniature Quality

While many of the miniatures in this KickStarter will be 3-D printed, the quality will be a very high level since they are 25 to 50 micron 3-D SLA prints which are very different than ABS prints.   Below is an extreme close -up example of a printed figure and how it shows no print lines when primed and painted (with no other prep work).    Many thanks to Yeji Kim for her painting of Vanguard Leader Anna (top row) and Jason Turner for the painting of Vanguard Leader Anna and Vanguard Trooper #3 (bottom row)!



Shipping will be charged in the pledge manager after the project.  At this time we are estimating $5 for US backers, $13 for Canada and $17 for Rest of World. Shipping of the KickStarter will be EU Friendly and should not incur any customs fees.  



  • Like 2
  • Haha 1
Link to post
Share on other sites
  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Reaction of two ork players was predictable - they want chibi orks - the world needs chibi orks!   The Auld Grump

Is it bad I was disappointed there's not a soldier with pigtails and a baseball bat?

I got to paint up one of their test prints.  Unfortunately, I took these snap shots myself (I'll get some better ones up after my wife takes pictures).   For those of you who are wonder

Posted Images

1 hour ago, WhiteWulfe said:

Ohhh my, those are interesting...  Especially the playful renaming...  Heaviest bolter!


My budget is thankful that I don't have much interest in Sisters of Battle ^_^;;;;;;;;


Yes, almost worth buying just for a "Double Slapfist"!

  • Like 2
  • Haha 2
Link to post
Share on other sites

64% funded in first 24 hours. Stretch Goals changed to add earlier access to more characters!

Posted by Impact! Miniatures (Creator)

We are 2/3rd of the way to being funded backers ... thank you!

If you have been watching Facebook the past two months, you know Heriberto has shown off a lot of the art for the possible stretch goals.   I've had several backers reach out to me and ask how soon they can get several of those characters.

So Heriberto and I discussed and agreed to alter the KickStarter stretch goals to open up the characters more quickly.  Originally the 1st stretch goal character was going to be at $2700.  Now if we reach $2750 we'll unlock 3!! new character models.

We also had several people ask me via message for Susan the Saint that was shown on Facebook.  So Heriberto and I agreed to move that from Stretch Goal #8 to #2 to give you quicker access.

We want to give you a great KickStarter and address your suggestions to make it that way!   So these changes will help you see cool figures more quickly with goals we can reach now more easily.   If you can share the project on Facebook, Twitter, Instagram, Reddit, blogs or forums ... thank you.   That should help us push to fund and get to some of these more easily accessed character models for you.

Also if you had seen a preview of the art for a model by Heriberto on Facebook for this KickStarter and that model was one you REALLY wanted to have ... please let us know.  Heriberto and I are definitely willing to move a figure up to Stretch Goals #3 and #4 if they are a clear fan favorite and something you would definitely add to your pledge to get.

Thank you backers ... here is hoping the last 1/3rd goes quickly and we can start unlocking the stretch goals!

Here are the new first two stretch goals!



  • Like 1
Link to post
Share on other sites

FUNDED! First Stretch Goal unlocks with just $98 more in funding.


Thank you Backers ... we've funded on Day 4 and now have 13 days to unlock some special characters!

First up and just $98 away is:


 Sarah will be an $8 add-on model!

Thank you again backers for helping us get funded from both Heriberto and I!

Tom @ Impact!

  • Like 1
Link to post
Share on other sites

Good day Backers!

Last night we reached Stretch Goal #2! So Susan the Saint is now unlocked. You can get her as a $10 add on to your pledge.

We are also only $58 away right now from unlocking Stretch Goal #3 so 6 backers adding Susan the Saint to their rewards will unlock another new character for today!

Also to make it easy for those of you wanting to easily get the add-on characters Heriberto and I have created 2 new mini set offerings as part of the KickStarter (the All Characers Pack and the Centuria Pack). We'll update these as discounted packages as we unlock more stretch goals!


Stretch Goal #3 will be Burninate Nate. Natalie (don't call her that) is one tough cookie and the fire she brings to the battle is no dessert either (unless she's on your side). She will unlock as an add-on at $2750 (which is currently just $58 away!!!)


Heriberto and I loved see the project fund and then go on to unlock 2!!! Stretch Goals yesterday ... we are hoping with the fun characters that will be the upcoming stretch goals that we can keep that momentum going.

Thank you again backers for your awesome support!

Tom @ Impact!


Stretch Goal #3 and #4 unlocked Nate and Da Priesta.

Great day yesterday backers we unlocked Stretch Goal #3 for Burninate Nate and #4 for Da Priesta!

We are only $357 away from Stretch Goal #5 right now.

Burninate Nate and Da Priesta are both now available as an $8 add-ons!

Also we have updated the All Character Pack and the Centuria Pack to include these 2 new figures (see images below).

That means up next for Stretch Goal #5 which unlocks at $3,500 is Shieldmaiden Marybull. She got her name because she say she hits like a charging bull ... her friends say it more like a speeding tank.


Thank you backers ... awesome to unlock 4 characters in 2 days!

Tom @ Impact!




  • Like 1
Link to post
Share on other sites

I got to paint up one of their test prints.  Unfortunately, I took these snap shots myself (I'll get some better ones up after my wife takes pictures).




For those of you who are wondering, Impact! Minis 3D prints are WAY better than other ones I've seen within an order of magnitude of the price range, and are quite nice to paint.

Edited by odinsgrandson
  • Like 6
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Geoff Davis
      My first time painting a chibi figure.  Probably not the last.  Painting this made me feel happy.


    • By Gadgetman!
      After the estate of one Fomo Barrowblight (who many moons ago, and with heavily laden bags, had said he was just off for a morning walk, never to return) was sold at auction, there came to light a strange scroll that appeared to be a map of the final resting place of a lost tribe of halflings.  These cousins lived down in the scorching Southlands, amidst endless dunes that had buried whole cities and civilisations.
      The newly elected (and so still very enthusiastic) Halfling Town Council had organised an expedition to make contact with their fellow halflings, with the aim of swapping some stories and recipes, and who knows, perhaps even coming back with some interesting new cakes.
      And, after many great perils and travails, the expedition found itself in a mysterious location known as 'The Valley of the Things'.  Here, recipes in strange hieroglyphs were marked on tomb walls,  guarded jealously by High Priests and long mummified pastry chefs.  
      The expedition takes time to assuage the fears of the High Priests that they are here to steal the sacred recipes and make formal diplomatic relations.  But Fomo Barrowblight and another mysterious figure seem intent on stealing the recipe to the sacred pie and have already gleaned some of the ingredients...
      To the Mummy's Tomb!
      Introducing a series of  Eight Fantasy Miniatures in 28mm scale from a halfling expedition to the burial grounds of their cousins, in the desert southlands. 
        Halfling Town Council Five
      The latest elected Halfling Town Council, has been responsible for launching the expedition to the distant Southlands, as always, it is made up of eight different townsfolk from all walks of life.
      I've already pledged for the whole set, why haven't you?
    • By SamuraiJack
      Echoes of Camelot: Arthurian Legends is a project that will expand our 75mm resin miniature range with new and exciting models based on the Matter of Britan, particularly around the figure of King Arthur and his Knights. We have many cool surprises prepared should you help us bring this dream to life.
      These miniatures have been sculpted and painted here at the Big Child Creatives studio with the collaboration of some of the most talented miniature artists out there. And what is more, they will be manufactured by our own talented team of resin casting experts. This allows us to monitor the process closely to ensure the best quality in the market and a timely delivery.
      We have learned a lot from our previous campaigns, and we want to put all this experience to good use, repeating everything we did right, improving upon it, and correcting our past mistakes. We invite you to join us in this journey of discovery throughout the Matter of Britain and its amazing cast of unique characters.
      This campaign is a journey of discovery, full of surprises such as custom bits to make your miniatures even more striking than they already are. Some of these kits will be Kickstarter exclusive, so those of you who choose to support us will be able to proudly show it through unique miniatures, even more full of life and character than our regular releases.
      Painted by Ruben Martinez "RMA" Painted by Marc Masclans Painted by Arnau Lazaro
    • By Glitterwolf
      Scroll down to get a free piece of terrain.

    • By GamerPrincess
      OMG!  Jason Weibe helped create the new Dwarven line being released on Kickstarter by Tomb Guardians!  These minis look so cool and they are cheap!  I haven't seen anyone post about this yet but here is the link.  It starts tomorrow morning.  They also said Bobby Jackson and Gene Van Horne created there monsters in the set.  Cant wait.   I purchased there Amazons and they were fantastic!  I posted some pics.  Im assuming the Fire Demon and add ons are in Resin.  

  • Who's Online   15 Members, 1 Anonymous, 37 Guests (See full list)

  • Create New...