Jump to content

Sign in to follow this  
Dan d'Lyon

Oak & Iron

Recommended Posts

https://www.kickstarter.com/projects/firelockgames/oak-and-iron?ref=profile_starred

 

55aabe4c5d2ef16050d6a17b7d4a1d61_original.png?ixlib=rb-1.1.0&w=680&fit=max&v=1541532843&auto=format&gif-q=50&lossless=true&s=2eeca542516438f29b3472edccf18a7a

“The enemy fleet brings its guns to bear as your captains await your command. Yet you hold your course even as fear threatens to test your mettle. You know the broadside you are poised to receive will be returned in kind, and with a single cunning maneuver your fleet will gain the weather gauge. The wooden behemoths creak and groan as the wind pushes them into position. With one sharp word the sky blackens with the smoke of canon fire. The battle begins!”   

 

39a63d7681dc40cc3632bcf37fe8b7d6_original.png?ixlib=rb-1.1.0&w=680&fit=max&v=1541456385&auto=format&gif-q=50&lossless=true&s=06f55a44cf96bd4b6ab42b61edf0d1cb

 

Oak & Iron is a 1/600th scale naval game set in the age of piracy, imperial expansion, and above all - fighting sail. It allows players to recreate battles between squadrons and small fleets of armed sailing ships. The game is designed to be true to the theme and tactics of the period while supplying significant flavor for the various factions. Players of Oak & Iron can expect to find all the usual design hallmarks fans of Firelock Games have come to know and love:  innovative rules, historical integrity, and beautiful models. 

The starting point for the game is the Oak & Iron: Core Box below.  We have included everything that you will need to play right out of this box, including six starting factions and a large amount of customization options for your squadrons and individual ships. We have done our best to add as much stuff to the Core Box as we could, but larger orders with manufacturers means less cost. A savings which we in-turn pass on to our backers through stretch goals. With this Kickstarter, our hope is to add an even greater value to the Core Box over the course of this campaign and launch a game that we will support with new releases for years to come. 

 

f7e38391758df453bd98e73c999cb370_original.png?ixlib=rb-1.1.0&w=680&fit=max&v=1542212207&auto=format&gif-q=50&lossless=true&s=44a90ea4ba3226531c1873aa2d8f5955

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/archangel3d/forsaken-lands-3d-printable-fantasy-tabletop-terrain?ref=discovery_category_newest
       
      About
        Start your journey through deep caverns, and the land of the spiders, before venturing forth into the cursed realms. Ancient demons and foul creatures dwell in the shadows of The Forsaken Lands...lands of ruin, mystery, and decay! Make a pledge to begin your adventure and choose your own path!
      3D printed and painted model depicted above. This piece was printed with a Creality CR-10 and Creality Ender 3. Miniature not included, used to demonstrate overall scale of model. Not affiliated in any way with any companies who produced the 28 mm miniature knight used to show scale in the photographs. The Forsaken Lands terrain collection is designed for 28 mm tabletop wargames and role-playing games. Each pledge is delivered as an STL file pack, designed to be printed on your home 3D printer.
      Each model is to designed to capture your imagination and evoke feelings of mystery, through an ancient lived in world, full of ruin, decay and beautiful imperfection! All files are green lit in Meshmixer and Netfabb, are single shells, and have been extensively test printed and optimized. Printing instructions will be included in each pack.  As a complete set, each piece is designed for a full and diverse setup on your gaming table, intended for games that utilize elevation as well as larger terrain pieces and scatter. Photo/Paint by Wright Terrain Studio/ Alex Wright  NO FILE EXCEEDS 200 mm on any axis and all prototypes featured have been test printed using the Creality Ender 3 and CR-10. Support material is not needed unless stated in select parts, such as roof pieces with larger overhangs.  Explore different lands and locations in the core set with terrain pieces that stand alone, or as a part of larger setup! Begin your long journey in the forsaken caverns where flickers of shadow swell up from the backdrop of ancient rocks and darkened pools amid the torchlight. Enter the land of the spiders as you traverse these narrow paths and hollows with untold numbers of eight-legged, bloodsuckers on the prowl. It would seem that a moment of respite can be found here, as you stumble upon the ruins of an ancient temple. But it is not the holy place it once was. Decayed and covered in thick overgrowth, mystery awaits you as you journey forth. Legend holds that a beautiful and powerful witch once dwelt in this great tower. After a tragic loss, her madness grew in a storm of grief. Some say she still lingers here, immortal, feasting on the flesh of all those who wander into the ancient mountain pass. Creatures of darkness plague this mountain village; there will be no sanctuary for you here. Those who still dwell here may prove even more dangerous than the night hordes responsible for the hundreds of dead buried nearby. An old villager takes you as far as they dare before sending you forth onto what the locals call, The Path of Despair. Here you find the ancient ruins of the city of Irkalla as ghostly moans rise up from the Gate of Souls...  
    • By SamuraiJack
      https://www.kickstarter.com/projects/laboitedejeu/clash-of-rage-2nd-printing?ref=discovery_category_newest
       
      About
         
    • By SamuraiJack
      https://www.kickstarter.com/projects/hammerlot/undead-graveyard-iv-scenery-for-rpg-and-wargames?ref=discovery_category_newest
       
      About
      Welcome to our new campaign: UNDEAD GRAVEYARD 4
      We have created new cemetery pieces to decorate your board and enjoy with your RPG's and board games.
      What you will see next is the result of our passion for miniatures and board games, our dedication and effort that we share with you in shape of amazing pieces for your games. 
      Please, come in and enjoy!
      In the graveyard there are always tombstones and tombs of many shapes and sizes. What few people know is that Vladimir Von Drake's legacy will always be alive somewhere between tombstones and obelisks at Undead Graveyard!
      This set consists of 4 stone graveyard statues. 
      These stunning statues are ideal to decorate any game board or create dioramas and give life to your darkest adventures!
      This set consists of 2, 4 or 8 hanged multiposition.
      Each hanged consists of 3 separate pieces: Floor + Wood beams + Hanged man.
      This is perfect for creating unique scenes and adapted to the needs of your board.
       
    • By Doug Sundseth
      https://www.kickstarter.com/projects/rocketpiggames/monster-miniatures-3d-printable-support-free-tabletop-minis
       
      Monster Miniatures: 3d Printable Support-Free Tabletop Minis
       
       
      There's a bunch of stuff in the project, which closes at 2100 MST (2300 EST) on Tuesday, 19 Nov. Looks like they've run other projects, but I can't speak to how well.
       
      Which is partly why I'm posting this. Has anyone dealt with these people before? If so, how did it go?
       
       
      Note: Apologies if I've missed an existing thread; I tried several searches (company name and project name) and looked through the first three pages of "Live" tags without seeing anything, but I've missed threads before.
    • By ced1106
      Deadlands Lost Colony is a roleplaying game setting for the Deadlands universe and uses the Savage Worlds Adventure Edition game system. It takes place in 2097, thirteen years after the Last War in Deadlands Hell on Earth. Hellstromme Industries created a “Tunnel” between Earth and a distant star system later called Faraway. Millions of colonists settled on asteroid mining stations and the only inhabitable planet, Banshee, before the Tunnel collapsed and left them stranded. Now the humans must fend for themselves against a rogue military, ruthless pirates, angry anouks, the rise of an evil alien presence, and worst of all, the arrival of the Reckoners—made flesh on Earth and exiled to Banshee!
       
      https://www.kickstarter.com/projects/545820095/deadlands-lost-colony
       

  • Who's Online   19 Members, 1 Anonymous, 272 Guests (See full list)

×