Jump to content

ced1106

Mantic : Terrain Crate 2 KS

Recommended Posts

On 3/9/2019 at 4:06 PM, kodiakbear said:

It made sense for Mantic to do a terrain crate KS for more modern games (even if there was not much for me in this KS) but I hope they do another Terrain Crate KS and do stuff for more ancient civilizations.  I could really use items with a ancient Norse, Greek, Roman, Egyptian and Indian subcontinent look to them.

A saga terraincrate would be good and fit in with a tonne of other kickstarters that are coming up in 19/20. 

Share this post


Link to post
Share on other sites
On 3/8/2019 at 8:12 PM, Darsc Zacal said:

I pledged at early bird level for a single terraincrate, but I plan on raising it once the pledge manager is out.

 

Had to contact my credit card company as they had blocked the transaction.

First time that’s happened in all the years and dozens of kickstarters that I’ve backed so not sure what was going on there.

 

 

My CC company blocks it almost every time. It's annoying. Least now I can unblock it via text. Before I would have to call to get my card turned back on.

  • Like 1

Share this post


Link to post
Share on other sites

Can't decide between 2 crates (paying extra for stuff I don't really want) or pick n mix.

It's frustrating that I can't switch back to the 60$ level if I decide it doesn't make sense.

People talking about increased confusion/error and not getting what you want has made me leery because I want specific stuff and really don't want specific stuff.

Currently leaning pickn mix (including shipping will be about the same as getting the 2 crates with the unwanted stuff).

With Campbell heights stuff (Mall, Office, Campground) minus the survivor stronghold (I only like the loading bay from that).

And Bellevue Square (Hospital, cottage, park) minus the Market

 

Share this post


Link to post
Share on other sites
On 3/7/2019 at 3:25 PM, Talae said:

I ended with an Early Bird crate. Not sure what I will be going with in the PM...but I think I will at least add a set of trees. My gut says Bleakwood Hall plus Peaceful Park and maybe the Market. We will what I actually end up going with.

 

I have used the stuff from their last KS a ton. This one is tougher due to playing only fantasy.

This is what two-months-ago-me thought. I really should try and figure it out to be sure if that guy knew what he was talking about.

  • Haha 4

Share this post


Link to post
Share on other sites

I finally locked in for Bleakwood Hall plus Gloomy Wood and Bustling Market.

Share this post


Link to post
Share on other sites

I have plans for that piano. ::P::devil:

 

One thing I learned fast is that Pathfinder Haunts are FUN!

Bleakwood works for most fantasy.

  • Like 1

Share this post


Link to post
Share on other sites
6 hours ago, PaganMegan said:

I have plans for that piano. ::P::devil:

Is it going to flatten a PC?

I'm torn on some of the stuff to lock in on...I have so much from the first Terrain Crate waiting in queue I can't justify a lot on my pledge.

  • Like 2
  • Haha 2

Share this post


Link to post
Share on other sites

I locked in on what I planned to. Just paid for shipping. Anything else I'll get retail  especially if there's a cafe set ( chairs awning/table  sandwich board).

  • Like 2

Share this post


Link to post
Share on other sites
On 6/5/2019 at 12:20 AM, NomadZeke said:

Is it going to flatten a PC?

I'm torn on some of the stuff to lock in on...I have so much from the first Terrain Crate waiting in queue I can't justify a lot on my pledge.

You've heard of the spell Meteor Storm? Well...

  • Haha 1
  • Confused 1

Share this post


Link to post
Share on other sites

Finally locked in cause, well, I was running out of time and the deadline for the pledge manager is Monday. :unsure:

 

In the end I couldn’t go as big as I had wanted, so this is what I got.

4544417E-49F2-442A-A1D9-D555F7AE39A0.thumb.png.5350f825604a7c3336a90afa53be1bc3.png14B5FA24-3600-4F29-9315-FBEF025FCD32.jpeg.3f01e7e1a5377cdb3d924d85e8062a8a.jpeg44A43DFF-339E-46B3-AD25-D8182411C5E5.thumb.png.b9572ca0734b7a700fe8e8ebb9ccb0ab.png

 

 

 

 

My thinking was a lot of the items could be used in a mix of genres from fantasy, old west, pulp, modern, post apoc, and maybe even sci-fi.

  • Like 4

Share this post


Link to post
Share on other sites

Pledge Manager closes today - 14% of the pledgers still haven't filled out the survey.... :blink:

 

The Auld Grump - this one was expensive for us... but we were happy with the boxes of loot from the first Terrain Crate, so went in pretty heavy. (Four Crates and a mix 'n' match.)

  • Like 1
  • Confused 1

Share this post


Link to post
Share on other sites

Recent post with samples look really good.

 

" We've been through these pieces with a fine tooth comb and have highlighted any issues (like bent plastic, soft details, thin sections or warped areas) that the factory will fix before final production. "

Edited by lexomatic
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/firstlegion/stunning-75mm-resin-fantasy-miniatures?ref=discovery_category_newest
       
      About
      First Legion 75mm Fantasy "Femmes Fatales" Resin Figure Kits
      A new series of provocative 75mm Fantasy Resin Figure Kits, each one beautifully sculpted and cast and a joy to paint.   
      Who We Are
      First Legion has long been a leading producer of 60mm scale superbly hand painted historical metal and resin figures as well as metal and resin figures kits in various scales. We most recently expanded into 28mm Fantasy miniatures with a huge launch of amazing sculpts that will be coming to retail early next year.   Please visit our websites and social media for more information.
      First Legion Historical
      First Legion Fantasy
      First Legion Facebook
      First Legion Instagram  
      The theme of the series is "Femmes Fatales", beautiful but dangerous women characters. Whether by force,  guile, or seduction these ladies are not to be fussed with.    There are 7 figures in total, each one more beautiful than the next and ranging in style from Gothic, to far eastern, nomadic, northern, and even an Aztec.   The commonality to them is that they are all stunning models of beautiful, dangerous women.  
      Those of you who followed our 28mm Fantasy Minis Kickstarter will recognize these figures from the "Femmes Fatales" Core Set.   They were originally sculpted in 75mm scale and reduced in scale to 28mm to be included in that KS as part of our 28mm fantasy series.  We present them here as originally conceived.    
      Unlike our 28mm KS, which had 170+ models, this KS is purposely very simple and very succinct.    Stunning models at great prices with rewards shipping in just 3 months!    
      Pledge Levels
      The first 5 Figures listed below are tied to pledge levels with selections to be made in our pledge manager following funding.   The higher the pledge level, but better deal it is on each figure.  
      Early Bird Pledge Levels are open for the first 27 hours.
      Add-On Sets
      The last two are available as an add-ons only, or as part of the "Drop Dead Gorgeous" Pledge Level.  Finally, there are three more that will be optional add-ons tied to stretch goals. 
      Resin Figure Kits
      All miniatures are produced in high quality resin and provided unpainted and unassembled.
      Mature Audience
      The figures below contain some nudity and are not suitable for audiences under 18.
      If you are offended by such figures, please stop reading and just move on.   They are purposely designed to be risqué, sexy, dangerous, and above all beautiful.    
       
       
       
       
    • By Darsc Zacal
      I’m interested in what people here think of this.
      It seems like a great idea, but I’m wondering if there might be some unforeseen drawbacks.
       
      https://www.kickstarter.com/projects/atlasmundi/immersive-battle-maps-for-tabletop-roleplaying-gam/description
      -
       
       





    • By ladystorm
      In an effort to reduce confusion by people seeking information and asking on topic questions, we are creating two threads for our Bones 5 Kickstarter.

      This is the thread for conversations, enthusiasm, and commentary.
        
      This thread will be lightly moderated to ensure forum rules are followed and specific questions may be relocated to the Official Information thread.
      https://forum.reapermini.com/index.php?/topic/88309-reaper-bones-5-information-thread/
       
      Link to project:  https://www.kickstarter.com/projects/reaperbones5/reaper-miniatures-bones-5-escape-from-pizza-dungeon/description
    • By WhiteWulfe
      EDIT: It's live! https://www.kickstarter.com/projects/oathsworn/oathsworn-burrows-and-badgers-anthro-miniatures-mouse-dog-cat
       

      We love miniatures. We love tabletop games. We love anthropomorphic animals, from Disney's Robin Hood through The Wind in the Willows to Brian Jaques' Redwall books. So we combined the things we love in our Burrows & Badgers tabletop skirmish game and the accompanying range of miniatures. And our Kickstarter backers have already helped us to grow the range to over 100 miniatures - but now it's time to add some more!

      Some miniatures from previous projects...
       
      Why are we making more miniatures?
      Because we want more characters for our Burrows & Badgers games – my Freebeast warband needs reinforcements, for a start! 
      And we know a lot of other people are looking for more anthropomorphic animal miniatures too. A lot of people are playing Burrows & Badgers now, and many of them have asked for Massive Hounds and a Massive Raptor, so we've sculpted them! Some will want to use them for other tabletop or roleplaying games, while others love painting miniatures, and our figures are perfect for that, full of character ready to be brought to life with your paintbrush....
      And some people just love collecting miniatures; again, we've made this new set of Burrows & Badgers figures perfect for collectors. They are all single piece models, with integral bases, so there are no fiddly parts to be glued on.
      We love making miniatures; we hope you'll love our miniatures too.
       
      Why we need your help...
      We've got 17 new miniatures sculpted, but they need to have moulds made before we can start producing the miniatures. And that's why we need funding; to get the production moulds made, and get the casting process started.
       
      About the miniatures...
      There are other ranges of anthropomorphic animal miniatures out there, but ours are a little different. We didn't want all the races of animals to be the same size. Instead, we've scaled them to each other; so a shrew or a mouse is a very small model, about 20mm tall, and a really big animal like a badger will stand about 50mm tall, for example.
      Each sculpted figure shown below has a scale picture with it, showing its height in millimetres. All our models are supplied unpainted.

       
      The Pledges
      We’re keeping it as simple as possible; there’s an ‘All-in’ pledge, which gets you all the new miniatures in this Kickstarter, and any bonus bits that may come along… there’s also a ‘Pick’n’Mix’ Pledge, if you just want to get a few of the new miniatures. For the Pick'n'Mix, just total up the prices of all the miniatures you want, and pledge for that amount. There's a minimum pledge of £10. There's only six of the sculpts shown so far, but expect more to be added regularly... I'll probably add two or three a day!
       

      ^Minimum of £10

      Pledge Level: The Great £40
       

      Pledge Level: The Small £64

      Pledge Level: All In £99
       
       
      Original post:
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/968660672/fishing-village?ref=discovery_category_newest
       
      About
      -Hi everyone, this time I propose you a Fishing Village:
      5 Houses   7 Footbridges  1 Bridge -A few years ago I did something similar for video games 
      here you can see the video: and I've thought of creating models suitable for 3D printing.
      -The models are in scale for 28 mm miniatures and are divided into components to be assembled without glue only joints.
      -Doors, windows, nets and winches are printed separately.
      -Each house is playable inside, with working doors and on the ground floor there is a fireplace with the pipeline out.
      -The prints you see below have been made with an Ender 3, layer 0.2 mm, infill 5%, Pla Geetech white, the models have been designed to have as few supports as possible, I printed them with an overhang of 80 ° -85 °, support Z distance 0,3 mm.
      -I highly recommend the use of printers with a print bed of at least 20x20x20 cm (for this scale).
      -Paint with cans and acrylic colors.
      -Each house needs about 500-800 grams of filament.
      -I put hooks scattered on the houses to attach cordage or oil lamps 
      -I remind you that only digital models will be sent to you, NOT PHISICAL ONES.
      * Good fishing ... *
      By removing the base you can have houses for a land village.
       
  • Who's Online   37 Members, 3 Anonymous, 295 Guests (See full list)

×