Recently Browsing 0 members
No registered users viewing this page.
So I don't know much about Battletech, more of a fantasy guy myself, but I do like these figures which are some Mech Warriors that were sculpted back in the eighties by Bob Charette that Ral Partha just recently re-released. They have eight per pack with different poses, and I got these first from the Liao Faction/Clan/Family. Going to eventually get through the whole group and I'll eventually photograph the whole group together, which is why I haven't based them yet. I've been told these are the pilots for the Mechs and it's very hot in the cockpit, which is why they are pretty scantily clad.
These are eighties Partha, so they are some pretty small 25mm sized figures. More to come later as I finish them!
FINALLY back in a WarShip frame of mind, so here we go! First up is the Essex-class CDS Architeuthis:
Up next is Alliance Naval Star, consisting of the Nightlord-class CSR Lynn McKenna, Essex-class CSR Marshal Ney and CSR Mulhacén, Whirlwind-class CSR William Adams, and Fredasa-class CSR Kutkh.
Good morning everybody, so here's a figure that's actually been sitting on my paint desk for probably six months I'm guessing. I got his skin and his white beard done, but afterwards all the colors to add on afterwards were kind of stumping me, so I ended up just leaving him sitting there for months and months. For some reason though after getting back from a business trip two weeks ago, I took him up again and finished him pretty quickly. I think it was a combination of color choices and some tight spots to get paint to that were putting me off. Anyhoos, I got him figured out and finished. I gave him some pink shoes, just because I wanted to annoy the cosmic color wheel, but when I look at it, his shoes don't even actually bother me that much. So I'm not sure if I was able to accomplish anything in an attempt to violate the holy color wheel or not.
He's a Hackmaster Battle Mage, probably from around 2003 or so, originally sold on the Hackmaster range and acquired a few years back from Iron Wind Metals/Ral Partha. Nice solid figure, pretty good side and despite my earlier trepidation, a pretty easy paint job to do.
Fronts and back at slightly different angles, couldn't choose the best ones so threw both sets in.
So anyhow, hope you enjoy!
By Xiwo Xerase
These are the first four BattleTech miniatures I've painted this year. They have been painted to tabletop quality. The WIP for them is over here.
The four miniatures featured here are: (from left to right)
Catalyst Game Labs Catapult, plastic, from the Fire Lance Pack. Iron Wind Metals 20-211, Archer ARC-8M, metal (standing in for an Archer ARC-2R). Iron Wind Metals 20-200, Griffin GRF-6S, metal (standing in for a Griffin GRF-3M). Catalyst Game Labs Cyclops, plastic, from the Fire Lance Pack.
They are painted in the parade scheme of the Free Worlds League Marik Militia: "purple, with highlights in red on the right side, and in blue on the left".
For an idea of size, here's the obligatory picture with Sir Forscale:
Individual pictures of the minis are hidden under spoilers.
The two metal miniatures have been based using Iron Wind Metals hex bases. The plastic minis were removed from their integral bases and based on Proxie Model hex bases. The basing is simply paver sand glued down with superglue and painted.
The paints used were: (all Reaper paints)
Primary purple: Amethyst Purple, highlighted with Sorcerous Mist and Spectral White Blue accents: Cyan Blue, highlighted with Ultramarine Highlight Red accents: Phoenix Red, highlighted with Fire Orange Weapon barrels: Honed Steel, highlighted with Blade Steel, Filigree Silver, and Shining Mithril Joints and other metals: Tarnished Steel, highlighted with Blade Steel, Filigree Silver, and Shining Mithril Hands and other "rubber" parts: Stone Grey, highlighted with Weathered Stone Cockpits: Adamantium Black, highlighted with Pearl White and Vallejo Metal Medium Base sand: Yellowed Ivory, highlighted with Creamy Ivory Base rim: Gem Purple Wash: A mix of Brown Wash and Flow Improver
As noted in the WIP thread:
There are some mold lines that didn't get filed down. There is some detail that should probably have been enhanced (for example, filing down more on the Griffin's missile pod and recreating that detail, or drilling some of the missile launcher holes deeper). Some detail in the Archer's missile launchers was obscured by CA glue. (Gluing on the missile launcher doors was painful.) When the Catapult was removed from its integral base, its outside toes were mangled.
As always, constructive criticism and comments are welcome. I won't be doing further work on these minis (unless I break one) but I can always use advice for painting future minis.
Who's Online 29 Members, 2 Anonymous, 170 Guests (See full list)