Recently Browsing 0 members
- No registered users viewing this page.
(Now a 2022 WIP)
Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
I also had the chance to gain some experience on paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
Basically, I have the scrap booking machine to make my own alien plants:
Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
Tasks to be completed:
Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) 2/27/22: Too busy; cut Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) 2/27/22: Too busy; cut Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) 2/27/22: Too busy; cut Gremlin Unit 13 (ECM unit, some large radar dish looking thing) EDIT: Maybe use older model (2018 or 19 ReaperCon entry) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) 2/27/22: Too busy; cut Gremlin Units 17, 18, 19, and 20 (gun units) 2/27/22: Too busy; cut Gremlin Units 21, 22, and 23 (missile units) 2/27/22: Too busy; cut Gremlin Unit 24 (large gun unit) 2/27/22: Too busy; cut Gremlin Unit 25 and 26 (junked units; scavenged for parts?) 2/27/22: Not going to be a permanent camp, so no junkyard Gremlin Unit 27 (2nd style missile unit) 2/27/22: Too busy; cut Gremlin Unit 28 (personnel carrier unit) 2/27/22: Too busy; cut
Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope
Details to be included
Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around 2/27/22: No longer a permanent encampment Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)
Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)
Base mounting system
Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
Picked up a bunch of the CAV terrain before Christmas t use for CAV and/or 28mm sci-fi gaming. Have been working my way through it and thought I'd post what I've finished so far.
72607 Ammo dump
72608 Fuel dump
72610 Short Containers (3x sets)
Generator with a couple of 28mm Warlord figures to show how it looks in that scale
Set aside some time for our 2nd virtual gaming convention coming March 26-27! We are currently working on a full line of events that will include online gaming, special guests, virtual painting contest, and much more! Special miniatures and prizes will also be available.
We are looking for more content contributors and would love to host your event! Please email us at cavcon(at)talon-games(dot)com ASAP! www.twitch.tv/talongamesonline
MAINVIRTUAL CC 2021 MAIN_2.mp4
For your consideration, I present Kallaguk, Troll King. This model was painted as part of a theme back in March 2020 where green needed to be the primary color for a Twitch streamer I follow. I had a lot of fun with this one trying my best to only use various shades of green. Happy with its result. C&C welcome.