Jump to content
  • Optionally enter a message with your report.

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Rob Dean
      So, I invoke the 3 foot rule on these; one could go back and forth forever attempting to edge half-timbered buildings.
       
      I have been idly working on new scenery since the pandemic, and finished two more buildings plus a well I bought a few months ago.  (That’s lightning speed compared to some projects.)  These are sold on Amazon by some outfit called Ender Toys.  I picked up a group of four, and a second group of two, some fences and the well.  
       
      If these are an example of what I could get at home, I’m not rushing out to get a printer to wrestle with.  The filament lines are pretty distinct close up.
       

       

       
      However, they are light and didn’t take all that long to paint, so I think they will be fine in a game.
       
      I posted the earlier buildings plus some tree bases in this thread: https://forum.reapermini.com/index.php?/topic/92205-tree-group-bases/
       
      The overall building collection now looks like this, including a Battle Masters tower:
       

       
      My crystal ball says there is a skirmish game in my near future...
    • By Rat13
      As Halloween approaches the dollar stores are filling up with cheap decorations and spooky bricabrac. Amid all the potential projects a certain reflective skull caught my eye. Not knowing if it would take paint or not I decided to roll the dice on a few. I attached them to some bases, added a bit of sand, and the next day I took them out to prime. 

      They ended up taking primer just fine, though I guess I shouldn't be surprised with the primer I use. Unfortunately I forgot to snap a picture of their grey primed goodness. 
       
      Next up were the basecoats of the skull and "dirt".

      I didn't get great or even smooth coverage on the skulls, but it was good enough as I was just going to add a heavy wash anyway.

      The wash was a bit thicker than I wanted but again I figured it was passable and more than good enough to move onto a final drybrush.

      Not too bad, but there is definitely room for improvement. I guess I'll just have to practice a bit more with my new drybrush. 

      I finally took the leap and tried Uncle Atom's makeup dry brushing technique. Though this project probably qualifies as a failure, I do see the potential. Now all I need is more practice, it's not like I don't have a huge backlog of terrain just waiting to be painted.
    • By MoonglowMinis
      Not super sure where to post this but this made the most sense to me. I found some fantastic miniature pumpkins at my local Joann Fabrics.
       

       
      Hopefully you can find them elsewhere if you don't have a Joann's.
      They come in $10 bags that are pretty big. I don't see myself ever needing to buy more. 
       

       
      They say "fall drieds" which makes me think they're some kind of organic. But they have the consistency of some kind of acorn or pinecone. So pretty solid. I don't think they'd deteriorate but if you're worried I'm sure a sealant of some kind would do the trick. 
       

       
      They come in a mix of sizes but they all look pretty good at 28mm scale. The cutting mat has half-inch squares.
      Most of the pumpkins are of the artistically exaggerated size compared to a mini, and the smaller ones tend to be darker and a bit more mishapen. The coloration in them is pretty decent. I think they could use a layer of highlights but if you're in a hurry or making a huge pumpkin patch, then they look just fine. 
       
      Anyways, I hope this is useful for someone!
    • By Rahz
      Another 3D print that I’m working on, this time a big one.  I’ve shied away from buying/printing dragons for the most part as I have a ton of amazing Reaper ones still to paint (or finish... ) but this one was a freebie of sorts from one of the creators I follow on Patreon.  
       
      In keeping with my clear resin tricks, I whipped up the base really quickly and then stalled on how I was going to paint the actual dragon...  oops!  
       


       
      I masked off the crystals and plugged the holes for the feet and primed it with a mix of brown and grey Vallejo primers, drybrushed it with a tan followed by a tan mixed with white and then it got a series of Vallejo model washes (green, grey and dark brown).  I then peeled off the mask and gave the crystals a quick coat with Tamiya Clear Green.  
       
      For the actual dragon, the plan now is to paint the heavier scales like the base with the softer belly and flesh being brown.  
       

       

       

       

       
      Like my recent plague doctor bust, I masked his eyes so they will be the same green as the crystals on his base.  I toyed with putting a light in his head as well, but seems to be doing that to everything all of a sudden, and skipped it.  
       
      in case you’re wondering about the pink, that’s what mixing the Vallejo red and grey primers did. The base was that colour before the drybrush and washes. 
       
      Hoping to get some more work on the brown and get the drybrush done on his scales this weekend.  That’s going to be a lot of drybrushing!! 
       
      Thanks for looking.  
    • By MoonglowMinis
      So for awhile now I've had this goal, nay, this desire, nay, this primal compulsion to build a boat.  It is not enough to have hand drawn maps, or 2D terrain tiles.  I need a fully functioning 3D boat!  Well, maybe not fully functioning.  But I want to build a cool boat!
       
      I've been working on a nautical campaign full of swashbuckling, sailing, and sea monsters for a few years now.  It's my White Whale project.  Always just on the horizon.  It'll happen some day, but in the meantime, I have a million small projects to complete and extend the chase.  One of which is my desire to build a few different sized ships to enliven any possible naval combat.
       
      I actually attempted this about two years ago, just winging it and making some measurements and throwing them at some craft supplies.  I wanted a cheap option that wasn't too difficult to repeat that way I wouldn't be discouraged from making multiple ships.  So I limited it to cheap crafting materials like foamcore, wooden dials, popsicle sticks, and thumbtacks.  And the result wasn't  bad.  Especially for my first attempt at any kind of terrain building.


      It actually turned out rather nice!  To my surprise.  But I got hung up on mast and sail designs and never finished.

      The wood on the deck had 2x1in grid carved into it for easier D&D use.

      and the figurehead was designed to be modular.

      However, overtime the boat collected dust and little scratches.  I should have given it a coat of mod podge or sealant of some kind, but never did.  And eventually it had an unfortunate run in with an injured owl that we took in for a night.

      Here's the little devil himself.
       
      Anyways, I put this project on the back burner for long enough and feel inspired to dive back in.  Especially with a certain Bones ship on the Horizon that I'm still on the fence about getting.  I was doing some browsing on the web and recently found this wonderful little blog complete with loose instructions and a plan from a now defunct wargamming site.  The blog creator had found the old plan and adapted it to build something using most of the same materials I have already stockpiled. 


      There's a few choices that I like better than my first attempt so I think I'm going to use this as some inspiration as I give this boat thing another go.

      My hold up now is still those darn masts.  The original plan above used wood and required drilling out holes for the masts.  The blogger use foam for his ship and found random bits of tubing to house his masts.  I could try to find something random like that, but I was hoping to find something simpler for easy repetition.  And I would also like to keep the masts loose so they can be removed for easy storage, or to swap out the sails.  Any thoughts?

      Any resources, tips, recommendations are very welcome!  I'll post back here with any updates.

  • Who's Online   6 Members, 0 Anonymous, 34 Guests (See full list)

×
×
  • Create New...