Jump to content

Jasper_the_2nd

WOWBuildings further Space Adventures 3D print STL files

Recommended Posts

Just noticed this KS was posted here. Only 53 hours left....

https://www.kickstarter.com/projects/wowbuildings/wowbuildings-further-space-adventures-3d-print-stl/description

 

Here we are folks, WOWBuildings is expanding further into space, with the infrastructure now for several types of scenarios, this KS will be a mix of vehicles and Buildings so you will have an even bigger range of choices for your tabletops. all will come in STL format and cuts will be made where needed so boot up those 3D printers once again and jump on board for what hopefully will be a great sack full of goodies to enjoy.

I am adding a couple of special adds that are for personal print use only as a little treat for you top end backers, all files will be initially 28mm scaled (but slightly over scaled to allow for GW sized figures) and optimized for 15-32mm scales so hopefully something for all.

Again human based faction designs for this KS with other races in the pipeline if all goes well, so hello again and as usual keep the feedback coming and if you want anything specific added then just ask, if it can be done it will be so

Stretch Goals as you see will start at £1000, and £500, but this time i am toying with adding some £250 jump points too here and there to add to the fun.

I have tried to keep the pledge level prices as low as i can as well including the licence which is an absolute bargain price for this KS as a thank you for continued support and to help with those after Xmas blues.

£10 Road Builder

2693ee9c054c642f44384df98003f277_origina
c208fa5b2f864b05dd4d2fc0432e7022_origina

£30 Asteroid Miner

e27e2cfd362bf24fca33f21a50ba7b1a_origina
54dc3ef8d98a3d334f137482343f4760_origina
3d64ae1a6ccbf5b98356efa08d9f8df0_origina
83111d61e9b5725f8b5fccd68a00c99c_origina
c9835cc31504c9a74639f7d65f96fbbd_origina
1b59e7ec720dba6bfdef1b73922b68bb_origina
2033b909c5a85e900b7ab8541a3fdc8f_origina

£40 Planet Settler

248ac9239017cd6a0ca711bab1188a8c_origina
1b8af9d793b2c6f9233a285a40b5881b_origina
c5b0f54dc7ab3a57a3faa2141d2a4711_origina
f86b541bbdbdee1d0e2fe2645cb4747e_origina
24e973ce92dc867b7d4f2a3ac9118fbd_origina
700e3a514fa3f4d310813d3f3cb8b539_origina
bda73af1a3e88a46d48e09f7b6916718_origina
dad9fb1d679713bcb6c9dc9bb8c359ec_origina
03b2b187e019679aa2d22c106bfbbf7c_origina
  • Like 2

Share this post


Link to post
Share on other sites

Ooooh, that grav tank... 

 

Edit: the planet setter tank.. 

Edited by WhiteWulfe
  • Like 1

Share this post


Link to post
Share on other sites
4 hours ago, KruleBear said:

Some nice terrain pieces. This one looks more useful than there previous one for me. 

That was my thought too.  I looked back at the first one as there is an option to add it on, but it is mostly interiors, and I'm mostly looking at scaling stuff down to 10mm for CAV.

Except the big tanks...they will get printed at 28mm....

  • Like 3

Share this post


Link to post
Share on other sites

I love that grav scout car! I wish I had the 3d printer, but not gonna buy a KS like this until I actually have one.

  • Like 2

Share this post


Link to post
Share on other sites
2 hours ago, Jasper_the_2nd said:

That was my thought too.  I looked back at the first one as there is an option to add it on, but it is mostly interiors, and I'm mostly looking at scaling stuff down to 10mm for CAV.

Except the big tanks...they will get printed at 28mm....

Yeah, there were a couple neat things in the first KS, but not enough for me to add it. I pledged for everything on this one though. 

 

2 hours ago, Corsair said:

I love that grav scout car! I wish I had the 3d printer, but not gonna buy a KS like this until I actually have one.

Yeah, that scout car stuck out for me too. Thinking it will be nice for Gaslands. 

  • Like 3

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By joshuaslater
      These savages are on Kickstarter.  My first Kickstarter!  There are all kinds of add ons lurking in here too.  Thanks Reaper for providing this forum! 
       
      https://www.kickstarter.com/projects/1648985407/rise-of-the-powrie?ref=creator_nav

    • By EvilJames
      Also did a quick speed paint of two statues. Not sure were the other column is at the moment, but this one was out while I was painting the angel of death so it got paint too.

      She fit very snuggly into that base. I'm debating whether or not she'll stay in it.


       



       

      The pair. Also the angel without the base.
    • By Smokestack
      https://www.kickstarter.com/projects/eternalverse/eternalverse-heroines-miniature-collection/description
       
      Eternalverse Heroines Miniature Collection
      28mm resin miniatures featuring powerful designs for girls in fantasy tabletop games, .STL available too! No boob armor, we promise.
      About
      We wanted to make a collection of miniature heroines that you would be proud to give to your daughters. We strugle to find variety in this field and we want to make a difference offering wonderful designs with non sexualized poses and clothes and, of course, defeat the boob armour for good, let's keep it practical. The nerd future deserves awesome heroines and we are gonna do it right. 
      Our miniature Heroines are perfect for a lot of tabletop games like Dungeons and Dragons, Pathfinder, Warhammer, etc. Also they're lovely for the painting enthusiasts with a medium level of difficulty.
      The miniatures will be available assembled and unpainted and in .stl, ready to be printed. They're in 28mm scale and come with circle bases. Moulds and production are going to be done by a factory of miniature proffesionals who make high detailed works like anime figures and wargames miniatures (and that they do the production on a very well know brand of figures who casually have a cool range of women soldiers!).
      Back view!  SHIPPING INFO
       Shipping prices are already stated, we consulted our mail system and included them to the rewards. The shipping is going to be certificated and you will have your tracking number.
      First prototipe, 3D printed with CR Ender 3 (not the final quality) Painting test on the prototipe!  ABOUT THE .STLs
      The digital reward is a great and cheap option for the makers!
      This miniatures are perfect for sla and pla printing. We will attach a little guide on how to print with better quality of detail. .Stl of the bases are inclued!  ABOUT THE PACKAGING
      As a basic packaging for the four miniatures we think of a cardboard and plastic blister but if we have enough funds we would love to give our Heroines a custom cardboard box! 
      As a stretch goal we have something you all will enjoy, if we reach 10 000 € we will add to all the pledges without extra cost the Heroines Digital Art Booklet as a big thank you. This pdf booklet will feature original concept sketches, illustrations and 3D renderings by three different artist. 
       We didn't want to add a lot of stretch goals because we want to give all our attention and care to our four heroines. We already seen that some of the bigger miniature projects here on Kickstarter resulted in big disasters because the creators were too ambitious with huge amounts of unfinished add ons and stretch goals. 
      Original idea, 2D development : Clementina Barcia, Carlos Rodas
      3D sculptors: CastnPlay
      WHO WE ARE
       We are two goblins based on Galicia, Spain  who like to think ideas and products for tabletop games. We are know for our Random Character Generator dice set and for our 3D printable terrain Easyhex inspired by low poly games. We like to do it well and kick!
      BUDGET FOR THIS CAMPAIGN
      This is how we are going to spend the funds, any extra money we will use it for getting better things for our backers and keep our indie business going. 
      TRACK US!
       http://www.kicktraq.com/projects/eternalverse/eternalverse-heroines-miniature-collection/ 
      SPECIAL THANKS
    • By paintybeard
      A new kickstarter project from Kev White:
       
       https://www.kickstarter.com/projects/hasslefriesian/artemis-20/description
       
      Don't think I shall be backing this myself as I don't do much that is bigger than 54mm.
       
      This seems to be happening off Kev's own bat and I don't think Hasslefree is involved. Whether that is a good thing or not I leave to your own judgement.
    • By MDSW
      CQW Vol II launches June 1st!
       
      We have added so much more to the pledges and also will include free stl files for furniture as well as the files for card stock furniture. Get book cases, single/double doors, weapon racks, altars, treasure chests, chairs, benches and tables!! We also have pledges that include the campaign modules printed for you.

      Get all of this in a Basic $14 pledge:
      Basic rule book Magic/potion/spell/item/weapon cards Character sheets  Card stock (for print & assembly) and STL files (for 3D printing) for all furniture: Bookshelves, single and double doors, treasure chests, chairs, benches, tables, weapon racks and altars. 3 campaign modules – Chateau de Guillant-levels 1-3, Halls of Valhalla-levels 2-5, The Giant Tomb-levels 4-7. Each campaign module includes:      Campaign module booklet with story and all details of the campaign     Detailed individual floor tiles with 1” grid (over 100 room tiles!)     Creature panel with all creature stats and abilities for easy reference     3 level floor plan (9 total)     Campaign specific cards (weapons, treasure, etc.)     Campaign token and ruler sheet     Applicable trap markers  
      Caver Quest Warriors Vol II Kickstarter

      We appreciate your support!!
       
       
      CQW Volume II: It's back and bigger and better than ever!
      It all started with wanting a good old-fashioned dungeon crawl, but in an easy to play board game that had flexibility in exploration and was challenging. I had a multitude of minis, so did not need to spend extra money on the available board games that included all of those minis and pieces to the point of the game costing hundreds of dollars and bloated rules to where picking up a casual game with friends was nearly impossible. Why was there not a role-playing board game with easy to understand rules, super quick to set up and unlimited flexibility to make my own campaigns, use my own minis and even print the material, board, terrain and furniture as needed?
      Welcome to Cavern Quest Warriors – the RPG board game where you choose one of six characters with unique abilities on a quest in search of adventure and treasure. Choose a Warrior/Fighter, Barbarian/Berserker, Cleric/Monk, Rogue/Thief, Wizard/Magic-User or an Archer/Ranger. All games pieces are designed to be printed on either paper or simple card stock (e.g. 110 lb. index) – just print what you need along with the basic rules, special cards and campaign module that includes the floor plan, creature stat panel, individual room/floor tiles and use your own minis to embark on a quest with your friends. The Cavern Master will guide the play for maximum challenge and enjoyment for the characters along with movement and battle for all creatures, keeping it enjoyable for everyone. Each campaign module gives the Cavern Master complete instructions on how to guide the players through each room and what creatures and events they will encounter. While this concept is not entirely new, the method and delivery concept are. By providing all documents electronically, you save money by printing yourself - no need to spend hundreds of dollars to get what ends up being an enormous board game with hours and hours of game play.
      The basic rules are quick and easy to learn, yet always challenging and allow for character expansion in all abilities through experience gained. The magic system is unique to ensure a varied and changing set of magic skills as wizards progress. New players can jump in at any time, in any campaign and at any level with our set skill system for characters – no need to start at the bottom!
  • Who's Online   16 Members, 1 Anonymous, 98 Guests (See full list)

×