Jump to content

My Portable Fantasy Game project (a little picture heavy)


Recommended Posts

I am not sure where to put this topic, so I have thrown it in general fantasy.  

 

My hobby goals for this month include painting some 1/72 scale plastics for what I call the Portable Fantasy Game.  I am considering the question of what the shape of this project should be, because, like a lot of the things I do, it has mostly grown organically so far.

 

To assist in planning, last week I unpacked the boxes and arrayed all the single-based figures for a photo inventory.  I won’t add the small group closeups, but here is the overview:

 

E097CE10-7E7B-471B-AF5D-C80A7ECD2802.thumb.jpeg.bb3a9cc84006e883219a4bcf97aab80e.jpeg

 

As of then, I had 112 pieces, and have finished up another 4 this week.  After I finish this post, I am going downstairs to spray some primer on another dozen or so, including the start of the baggage train, a couple of carts.  

 

I am lucky enough to be able to attend several conventions most years, and I like to take a pick-up game with me, so the basic idea behind this was to have something portable (so size and weight limited) which would give me the flexibility to play different games, depending on the needs of the moment.  

 

01CA606A-F8D3-433F-B3F7-EE4241503124.thumb.jpeg.0f8f96fae4a4bbc52d24953bf2210c75.jpeg

 

Most of my miniatures storage is arranged in Really Useful Boxes, generally the 4-liter size.  In working up this idea, I found that they sell a 12-liter box with dimensions allowing it to fit under the seat on full size airliners.  The 6-liter box is half the height and nests, and I have found, as shown above, that a 12, a 6, and a 2.5 liter box can be strapped together and still fit in the overhead compartment.  That was from last year’s trip to Gencon. The “Strap-a-handle” gives me something to hold it by, and I run one lateral nylon strap around orthogonal to it.

 

That’s the outside of the boxes.

 

For reasons that made sense at the time, having to do with a failed Kickstarter for a magnetic portable dungeon wall set-up, I based the individual figures for this game in the reverse of my usual technique, with the magnet stuff on the figures and the steel element in the box.  So the figure storage is steel lined, as in this shot of the 2.5 liter overflow box:

 

3BAEC209-4AF6-4743-8D25-CA065FA9AAC5.thumb.jpeg.588343af599c32a6cbe9e1a3ac04850e.jpeg

 

The 6-liter box is flex space.  I have three of them, although, as shown above, only one at a time would fly.  More would readily fit as part of a road trip.  They are set up with my usual system, magnets in the box for steel bases. At Christmas this year, I loaded one of them up with two Dragon Rampant war bands (with some options) and fifteen or so Burrows and Badgers figures, all in 25mm metal, becuase that’s what my brother expressed interest in playing:

 

BB19CD1E-6AB7-4C37-B1C1-2677552D264E.thumb.jpeg.4ee1af26639bcfdb75fb9162d4314def.jpeg

 

As I type, the other two 6-liter boxes are currently loaded up with all of my multiple-figure-based 1/72 scale fantasy figures, from an earlier road trip.  I generally try to keep the 6-liter boxes empty, and swap troops in and out as needed for a specific trip, but I haven’t re-stowed things since the move in November.

 

Inside the 12-liter box, there are two figure storage boxes, a short one and a tall one.  Here’s the short one:

 

881B3BC6-68F0-4526-AEF4-419AF1D6D03D.thumb.jpeg.2783eed628e07364234515d7ebb12d3e.jpeg

 

In addition to the two figure boxes, the 12-liter box is loaded with a 3-foot square double sided groundcloth, a set of four hills, a village of seven buildings and a bridge (all Dave Graffam card models, to keep it light), a dozen or so trees, a half dozen plastic rock formations which more or less nest, a couple of primitive stone head statues, some low walls, a bag of lichen, a bag of aquarium gravel, some rolled cloth roads and streams, various gamemaster stuff such as dice, rulers, status token, three or four sets of rules, and some laminated scenario force sheets for a few preplanned situations, to make pick up gaming easier. Here’s most of the scenery deployed, with the green side of the cloth and hills up.

 

966E11EE-0B21-4EEB-B7C0-5FDEAC0B5EC1.thumb.jpeg.c1ce7b3e494f7591b33d9698e58de992.jpeg 

 

Here we are at Gencon in 2014, actually playing a game of Song of Blades and Heroes:

 

4AEB1E97-8B29-4E52-84E5-D87F9F1B9B00.thumb.jpeg.3b0827c34b952fc0e764136ca43199e6.jpeg

 

So why 1/72 scale plastics?

 

On the minus side of the ledger, the supply of typical fantasy things is somewhat limited. The figures are often irritating to clean up for painting.

 

On the plus side, a box full of them is light.  That also helps the magnets keep them in place while traveling.  I wouldn’t want to turn the boxes upside down and shake them, but even if I did, the plastic pieces won’t damage each other as badly as metal might.  

 

They are on the low end of what it is practical to base and handle as individuals, so it would be difficult for me to imagine going with 15mm metal for this.  On the other hand, they are big enough that I can paint some detail on them, so painting stays fun rather than being a burden.

I have painted some of these guys with the travel paint kit, so it’s possible to get to the double portable levels, where all the support infrastructure is portable too...in case we ever take up RV nomadism, I guess. ::D:

 

As individuals they are also broadly compatible with the 1/72 mass battle figures, a pre-exisiting project I share with both sons.

 

08B82FF4-E60B-4F79-8FF6-5CFE500EEC4A.thumb.jpeg.682ff0b3b197941152346745e0d53ae5.jpeg

 

So, that’s where things are now.

 

The next question is what I want to fill out the remaining space in the 2.5 liter box with, which would allow support of a reasonable range of activities in a roleplaying game.  I am thinking a few more non-human monsters, in particular, and then I can shape the scenarios to fit the figure collection.

 

Thoughts and comments?

 

  • Like 11
Link to post
Share on other sites
9 minutes ago, Glitterwolf said:

Cool collection.

 

How about a war machine?

Chariot/cannon/catapult?

 

I'm not scratch building one. ::D: 

 

However, I do have a couple of Zvezda catapult kits in 1/72 hard plastic plus a box of "siege troops" from Orion, so that would be possible.  For skirmish/rpg play, something like that would be more terrain/objective than an active weapon.  If I build a 1/72 scale castle, siege equipment will be part of the combat. I don't think the siege will be particularly portable, but I do have card model castle files in my terrain collection.

 

My younger son did convert a couple of Zvezda four-horse Persian chariots with skeleton crews (from Caesar) for his 1/72 undead army.  I don't seem to have a close-up in my collection, but here's a crop from a larger game-in-progress photo:

 

IMGP4812.jpg.b69700170e4ed1a5dab6b4872d5245f1.jpg

 

  • Like 7
  • Thanks 1
Link to post
Share on other sites
  • 2 weeks later...
  • 1 year later...

I spent my extra time this morning (when I used to commute) doing one of the nagging little hobby tasks on my list: repacking the portable fantasy game.  I started this thread last year when I was doing an inventory of the figures, but I see that I didn’t post much about the rest of the gear.

 

This task became necessary last week when I received a package from my mother with new terrain pieces.

 

The original set-up started with a double-sided ground cloth and a group of double-sided hill/pillows (fabric over upholstery foam) done for me as a custom project by an Etsy craftsperson who was in college with my son:

 

337915E7-DABC-462E-B17F-4ADC00A3DCE8.thumb.jpeg.a06520dd2da93b4e189f4abafcbcf4e0.jpeg

 

What I got from my mother (whose main hobby is quilting) was the scenery bases.  Linear pieces are double-sided to serve as streams or roads.  The large irregular circle pieces are all backed with woods base material on one side, and brown, grey, or blue on the other side to designate rough ground, town areas, ponds, etc. as necessary.

 

F8EE6467-0387-41CA-BC49-9665906D82FE.thumb.jpeg.3932472ec18a807d97625a8c08a0b6bc.jpeg

 

The scenery package also includes a bag of small stones for scatter decoration and to marks fords or whatever, and lichen to enhance the appearance of stream banks, woods bases, or to serve as hedges as needed.

 

1D8DCCCA-F290-4956-B8DE-3B64BA608E26.thumb.jpeg.1523e26048968532465dcf654f52495a.jpeg

 

There is room in the box for about 10 trees, mounted on steel washers to engage with rare earth magnets placed under the scenery bases to give them a little stability...

 

75BDDA8E-3FE4-44CB-9FD8-03C44EDAC881.thumb.jpeg.32f6bb8f8d473ba0096a57d1ce6cd46d.jpeg

 

There are also a half dozen plastic rocks, which are very light, and also nest for travel.

 

2C42FF68-79BA-41C0-A1EF-115B9C30F6D4.thumb.jpeg.f6be50f500c825f83d5046b28f789687.jpeg

 

...and a couple of stone heads, because I don’t seem to be able to have fantasy scenery without stone heads.

 

A few old resin low walls, nicely sized for 1/72 scale figures, have been repurposed for this.

 

31130529-F095-487D-A7EC-5E00E4540AF2.thumb.jpeg.e6100305c7194404bd01976e3dd84fe4.jpeg

 

And, to keep things light, there is a collection of card model buildings (all Dave Graffam models printed at 75% of base size):

 

0945D265-C0E2-417E-9F8A-FC9B7808CA30.thumb.jpeg.53831f206a02c6031c86cd01bb9209f5.jpeg

 

As I noted above, I expect to carry one or more supplemental figure boxes for a trip to a convention, but there are two boxes internal to the main storage box:

 

862784E0-1AED-4F26-91A7-0F6E51CA5623.thumb.jpeg.f5d9981ecb68ade64a1dd97527972e5e.jpeg

 

Since this is intended to be a ready-to-go gaming kit, there are rules, and a set of laminated orders of battle and qucik reference sheets:

 

57062D77-1405-4582-B4DF-E31AA7D10CB3.thumb.jpeg.f99a2745eabcb15861cb78eab28b95b1.jpeg

 

And a set of dice, markers for various games, tape measures, rulers, and measuring sticks:

 

174BE1E7-EC8A-46E9-90BC-12DCB06D2320.thumb.jpeg.8dcddd92b27998958f84d703df8ced92.jpeg

 

One it was all laid out and trimmed of extra rules, handouts, etc., it was time to pack it back up.

 

E86899C5-6428-4190-984D-911BDF05250D.thumb.jpeg.35c19e0214372d6619a5cb2c37e739e3.jpeg

 

Buildings, troop boxes, and trees form the lowest layer, with small bits like tape measures and dice forming the next layer.

 

On top of that go one layer of hills, the rules, the ground cloth, and the other two hills.  Happily, the hills are fairly compressible.  Everything is stacked to avoid compressing the buildings at the one end:

 

F6964E0B-0F67-492F-B0D7-43B560377A06.thumb.jpeg.5de2207af30a96e79f90074c36cb0a7b.jpeg

 

And finally, to prove that it can be done, the lid goes on:

 

DD22AA62-C07A-4933-9585-64CF09E8A198.thumb.jpeg.f14851e1b75dc03bc22c2ca14f9812a4.jpeg

 

The lid has a thin steel sheet with a dungeon floor pattern attached above it, so that a dungeon environment can be deployed in a pinch.

 

And, there we are, ready to head to a convention...if there were such a thing right now.

 

 

 

 

  • Like 10
Link to post
Share on other sites
  • 2 weeks later...
  • 4 months later...
On 2/9/2019 at 8:03 AM, Glitterwolf said:

Cool collection.

 

How about a war machine?

Chariot/cannon/catapult?

 

My son has been busy recently.  This bolt thrower is a 1/72 hard plastic model from a Zvezda Siege Engines package...

 

9B607ECA-663A-4DDD-B3CE-C2FF6EDF242B.thumb.jpeg.36ff43ad725ce20d708df2ca8597542e.jpeg

 

ED3FF011-36AD-4A49-ABE2-5AB1D0E60C0B.thumb.jpeg.8373108dc26fd010b4d1e08caa7d09e3.jpeg

 

This might finally push me over the edge to get started on some of my own.

 

 

  • Like 8
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Rob Dean
      This hasn’t been a particularly good month for painting.  I had a week off back on the 9th, but, as shown here, my desk had gotten too cluttered to actually get much painting done.  I’m also off this week, and decided that I would try just putting one task on the desk at a time, to see if that would help.  My son has been diligently working on his Bronze Age DBA armies, so I decided that I would finally get started on the last stand of figures I needed to finish my 2nd DBA army.  (DBA : De Bellis Antiquitatis, a popular set of ancient wargames rules for small figure collections to be played on a small table.) Earlier this year, I had managed to get all of my 13th C BCE Libyan infantry done, to match against my New Kingdom Egyptians, but I still needed a “chariot general” base.  
       
      Son and I have been working this project intermittantly for about fifteen years, and we have a deep stash of Caesar Miniatures 1/72 scale plastic figures.  There is no “official” Libyan chariot, so I cobbled one together using an Egyptian chariot body, horses from a different (Mitanni) chariot set, and a Libyan commander pose.  He’s a little too wide to be able to fit a driver in as well, so, artistic rendering...
       

       

       

       
      We used to mount our chariots on a 40mm wide by 60mm deep base, but the DBA rules call for 60mm by 80mm.  The single chariot looks a little lonely, and there isn’t room for a pair of them, so he and I agreed that we would generally mount a couple of “chariot runners” with each vehicle.
       
      Most of my Libyans are done with cloaks painted to represent hairy hides from spotted cows, in keeping with the modern painting guide depictions.  However, searching around for actual contemporary Egyptian depictions of Libyans came up with this (I’ve cropped a single figure out of a group of four):

       
      I did my best to replicate the alternating rows of “eyes” and “arrows” on the general’s cloak, and echoed the pattern on the chariot body decorations because “why not?”.  At least any historical nit-pickers are likely to have seen the same picture...
       

       
      Here’s the completed “army”.  With the Egyptians, I can at least stage a remote game without using proxy figures, although we are starting to look forward to getting together for an actual games day sometime again (probably still six months off...).  Maybe my next army, the Nubians, will be ready by then as well.
       
    • By Rob Dean
      You know what sort of year it’s been when you think to yourself that you played a game “recently”, only to find that it was last October. 
      So, in a “recent” game of Dragon Rampant, I was using a scenario from the related game Lion Rampant which called for three “wagon” markers for one side to be escorting.  I had two 1/72 scale plastic wagons or carts at the time, so I threw in a noblewoman (an old Airfix mounted Maid Marion figure) as a third element to be escorted.  Afterward, I pulled some farm animals out of the plastics collection and decide to add some flock/herd bases to the baggage train.
       
      However, pandemic, etc...I finally got the sheep painted yesterday, deciding at the last minute (earlier this week) that they would look better with someone to keep an eye on them.  The shepherd is another of the ubiquitous Robin Hood set figures.  While I was at the desk and working, I also finished up an addition to the NPC/civilian/camp follower collection.  This figure came from the Strelets/Linear-B Roman Transport set, and didn’t look particularly Roman, so she gets added into the general 1/72 fantasy pool.
       

       

       

       
      Sir Forescale would pass as an ogre with these guys.
       
      Anyway, it felt good to get something done, even small...
    • By Rob Dean
      Ok, gang, I’ll be honest.  I shouldn’t post this now without all the well written explanation of what I’m about here, but it isn’t coming and I would like to get this posted...
       
      Earlier this year, in the before times, I did another of these stands.  These are for a Hordes of the Things elvish army (primarily) and are expected to be “beast” stands — rapidly moving, at home in rough terrain.  
       
      This was a speed paint; all three figures took an hour.
       

       
      With the 1/72s, I like to paint a little more than is necessary, for my own amusement.  Here’s a closer crop of the sorceress:
       

       
      The leaf pattern freehand is a bit dodgy.  Amazingly, the necklace is actually cast into the figure.
       
      But it’s all a bit irrelevant when the whole group is arrayed on the stand:
       

       

       
      A bit over contrasty; had to use a flash to take the pictures.
       
      A layer of sand  and glue to hide the bases, a couple of tufts, some flock, and a spray varnish and they are as ready as they are going to get:
       



       
    • By Rob Dean
      A little expedient painting...I am still trying to finish my 12-stand De Bellis Antiquitatis (DBA) army of 13th century BC Libyans, and they get a stand of mercenary Sea Peoples blades. So, here it is.  As with the other Libyan stands, the figures are drawn from a Caesar Miniatures box set of ~40 figures in 12 poses, of which we have great store.
    • By Rob Dean
      The next piece of my DBA 3.0 Bronze Age Libyan army has ben varnished and is ready for battle...as soon as 5 more stands of things get painted. 
       

       

  • Who's Online   20 Members, 2 Anonymous, 35 Guests (See full list)

×
×
  • Create New...