Jump to content

Sign in to follow this  
WhiteWulfe

WhiteWulfe gives "speed painting" a whirl (77008 Garrick the Bold, 77057 Juliette, Female Sorceress)

Recommended Posts

I'm a bit delayed on these photos, as I got distracted by various things but pictures are finally taken, even if there's apparently some dust on them now >.>;;;;

 

Anyways!  Back in February (Feb 18th to be precise, at least according to messages I'd posted on Discord) I decided I wanted to give speed painting a whirl, in order to try and develop a few techniques that I could then apply to my Skaven horde of doom.  I also wanted to try out a few different mini holders (generic tylenol, as well as Motrin bottles) to see if I'd prefer something like the Mini Holder, or if I could just DIY something, as my current solutions tends to wind up causing my right paw to cramp up after a while, and maneuvering the miniature isn't always the easiest.  Such was partially inspired by the awesome thread @ManvsMini did about custom holders and also a desire to see whether it would be worth splurging on a Hobby Holder with Handle Mod 1.

 

Short version is that the Motrin bottles won out, although the generic tylenol bottle was handy because it has a lid that spins more easily...  So technically the Hobby Holder would be able to do both, AND give me a brush rest.

 

Anyways, I'm rambling in a show-off thread....  Originally I'd wanted to do just the one mini, but quickly wound up putting two up so I could directly compare the two bottle types I had on hand.  I think I set my goal at "finish a single mini within two hours", and I'd say I pulled that off, since I managed to do two in 2h10min...  So needless to say, rather happy about that!  Oh, it also morphed into some sort of "less than twelve colours used" and "you can only use one 10-well palette, and once a colour is in one, it's committed" challenges too, both of which I was successful with (11 paints total used, including washes, and I sure wound up using all ten wells too).  Not quite sure why I do such, but eh, it was for fun, and I had fun, which is the most important aspect of it all in my eyes!

 

P1010662_Cropped.thumb.JPG.878a798287112fd9a92b7d0371fcfe76.JPGP1010663_Cropped.thumb.JPG.3132eeec5fa10dce80cde55897f29506.JPG

^So first up, obvious is Sir Forscale, aka Garrick the Bold...  In Bones.

 

P1010665_Cropped.thumb.JPG.77883ff11eacf3f9f5ee7156150c63f2.JPGP1010666_Cropped.thumb.JPG.618ebb52a201ac48a531c9983b755188.JPG

^And then Juliette, Female Sorceress, also in Bones.

 

 

And since I can't resist, yup, all done with size 0 brushes, because that's pretty much all I had on hand back then.

 

 

So, I have to playfully ask myself, what did I learn, besides the obvious aspect of a fox loves orange and black?  Uhm...  Good question.  I know I did a decent amount of drybrushing, but I also can't even remember if I used any metallic paints or not as it's been a while >.>;;;;

  • Like 17

Share this post


Link to post
Share on other sites
17 hours ago, Glitterwolf said:

Nice job for speedpainting!

 

 

Many thanks!  Needless to say, I'm rather happy that I was able to do not only one but two minis in just over two hours...  I'm not planning on going for any kind of speed records (or time limited competitive events), but it is something I hope to do every now and then to try and help my overall speeds become somewhat more... Manageable.  Or at least find that balance I appear to be craving ^_^;;;

 

1 hour ago, Chaoswolf said:

I agree.

 

Thanks!

 

34 minutes ago, KruleBear said:

Nice. Thecolor pallete really works on the knight. 

 

Thanks!  I do wish I had written down what paints were used (or at least taken a photo of them), as i'd love to be able to redo it later on, but I suppose that's part of the fun as the old saying goes ^_^

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Doug Sundseth
      Finished this figure over the weekend. Some parts I like quite a lot, but the blending is a bit weak and the casting of the left side of the face is poor. I like the sculpt a lot, and I've put the metal version (03547) into my wishlist for my next order. I think it might make a very nice piece to spend more time on.
       


    • By Maledrakh
      From the Bones 4 core set, this is the subset called "Classic Horror", #130 through #135.
      A take on some of the monsters of the 1930's Universal movies series fame, with both male and female counterparts. I based the Mummy on a 35x25mm base as his integral base was both scenic and rather wide and I did not want to cut it down. The others are based on 30mm round lipped bases.
       
      Click for more pics

    • By Maledrakh
      I am slowly working through the Bones 4 core set. Today we come to #13, the Warrior of Chaos. I don't know what Reaper is calling this mini, if they even have a name for it yet. I imagine it would be something like "Bloodcurdle Angerpants, Anti-Paladin" or "Gruff McDuff, Evil Fighter". (Feel free to use these names, Reaper )
      But it clearly is a Warrior of Chaos.
       

      This model has the look, what with horned helmet, bulky full plate, skulls, straps, furry shoulders, heavy cloth cloak and the tower shield.
      ...and I was going to put a picture of a chaos warrior from the GW webstore here for comparion, but they obviously did not want me to, so that did not happen. No matter.
      Did I say Warrior of Chaos? This is clearly a Champion of Chaos, what with such a massive rock to put their foot upon! Feet, even!
      I had to base it on a 40mm base. Champion sized at that.
       

      I have the higher ground! You cannot win! Also, I have a full set of Chaos Armour and all you have are tighty whiteys!
       
      B4Core #13 Champion of Chaos
      Reaper Miniatures, Bones 4 KS 2017
      Sculpted by ??
      Bonesium PVC.
      40mm round lipped base
      should be available from reapermini.com some time in the future
       
    • By Maledrakh
      A large mini ragepainted sloppyfast in under an hour just to blow off some steam and get it off the tray it has been standing around for ages on.
      Well, large mini I say. Compared to most other dragons of the Bones kickstarters, this one is rather smallish.
      However, back in the day when heavy metal was king, this mini would be considered a large miniature of a dragon.
       
      pics below the clicks
    • By NomadZeke
      Please use the full SKU and name of Reaper minis in the titles of your Show Off threads, per forum guidelines. You can find this information on the blister card or in the online store. I also like to give credit to the sculptor in a tag, so people can find their favorites.
       
      We have a high volume of posts generated from this challenge, which is great! But it's also creating a lot of work for the mods. Ladystorm has already urged folks to comply with these guidelines.
       
      As an experiment, this project has been moved to be a bi-monthly challenge again, that seemed to have worked so until further notice that is our format. The longer time frame theoretically will give less stress to painting, and allow more complex jobs, and more sinister challenges.
       
      FAQ
      Reaper only? - No.
      If going on vacation, can I paint a mini(s) ahead to cover that time frame? - Yes.
      Are speed paints acceptable - Yes.
      Can it be a mini started previously? - Yes.
      Based or unbased? - Yes.
      Do minis for exchanges count? - Yes.
       
      NEW RULE - Size Equivilancy
      (This list is subject to change as bones 3 releases)
      Medium and smaller = 1 ea
      Simple Terrain (plain floors, walls) = 1ea
      Complex Terrain (http://www.reapermini.com/OnlineStore/Terrain/latest/03518 or such) = 2 ea
      Large (Giants and the like) = 2 ea
      Huge (Most dragons, Demon Minotaur Lord, etc) = 3 ea
      Bigger (Kally, Khanjirra, etc) = half of quota rounded up
      Colossal ("Tianot,") = quota
       
      Due to the variable nature of a CAV I compare them against a generic 28mm figure and the Avatar large figure. I take height and bulk into considering if it is worth 1 or 2 figures.
      If it's not in this list, it counts as 1. (not yet updated for the CAV II figures)
       
       
      If you have a question on the size, please post it here, and I'll address them individually.
       
      Much like last year, the idea is to help those of us that normally paint VERY little or not as much as one would like, to start painting more.
       
      You challenge begins...now!
       
      And Our Mantra:
       
       
      Participants:
      If your name is missing, or you believe your count is incorrect, please PM me. Please note: to make counts easier, post in the bi-monthly thread and include the tag RPChallenge
       
       
      The objective:
      To paint 52+ minis throughout the course of the year via bi-monthly quota
      (each bi-monthly thread will have the quota listed as well as the master list)
       
      What qualifies:
      Darn near anything!
      Reaper/non-reaper!
      Any material!
      Shelf of shame minis from ages long forgotten!
      Exchange minis!
      Speed paints!
      Armies! (Though I'd encourage perhaps something outside the army as well)
      Any Size!
      Based/unbased!
      Etc! (I think that covers everything)
       
      Year long challenge
      Pick a miniature of size large or greater to complete in the Jan-Feb Block. In Nov-December, purchase that same mini and repaint in the same scheme to see direct side-by-side improvement or changes in your methods
       
      Jan/Feb: 8: http://forum.reapermini.com/index.php?/topic/84372-january-february-rpchallenge/
      March/April: 9: http://forum.reapermini.com/index.php?/topic/85335-march-april-rpchallenge/
      May/June: 8 https://forum.reapermini.com/index.php?/topic/86376-may-~-june-rpchallenge/
      July/August: 9: https://forum.reapermini.com/index.php?/topic/87162-julyaugust-rpchallenge/
      Sept/Oct: 9: https://forum.reapermini.com/index.php?/topic/88521-september-thru-december-rpchallenge/
      Nov/Dec: 9: https://forum.reapermini.com/index.php?/topic/88521-september-thru-december-rpchallenge/
       
      Again, I request that when tagging your posts, please use "RPChallenge" to help with locating minis from this.
  • Who's Online   57 Members, 2 Anonymous, 241 Guests (See full list)

×