Jump to content
Sign in to follow this  
Silvervane

WW Tin man as Frostgrave Fireflingers

Recommended Posts

Ok, Here I go starting another WIP.  I had the hankering for Frostgrave only no one around who wanted to try.  So I decide to finally give the Dark Alchemy solo scenarios a try.  I had skeletons, rats, and a stand-in for the alchemical monstrosity.  I looked around and thought, hey those WWWOZ Tin man painted up red and gold would look cool as the FIre-Flingers for the final scenarios.  I also decided I only wanted to paint them as gaming pieces.  I haven't really posted anything cause my camera broke, and I really haven't wanted to pick up another.  So I'm starting this WIP to practice with my phone camera, as well as post here a little more often.

 

Here was the first of four I need for the scenario, as it stands at the moment.  Photo work still in progress as well:

FireFling_01a.jpg.689dac1fdfb1015feaf751f038ddb888.jpgFireFling_01b.jpg.7fc1a57a516c2648f4091535ef2e530d.jpg

 

Unfortunately, I had a TPK in scenario 2.  The scenario called for Wizard or Apprentice and 4 of soldiers for the mission.  They all went down, and I rolled unbelievable less than 5 for all of them on the survival roll.  I'm less than inspired to complete these guys now.  but I'll carry on and hope that the apprentice can survive the final encounter with whats left of the warband when I finish.

  • Like 15

Share this post


Link to post
Share on other sites

I hadn't realized what a SPLENDID mini that was until I saw your painted version. He & your brushwork on him are just too good not to finish.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Silvervane
      Now the 2nd member of the pair from zombicide: Black Plague special character, Thalia.  The traveling companion of Grom.  These two are also going to serve as a Savage and Swordsman for my Ranger's of Shadowdeep warband.  Went with some NMM, some came out ok, other parts didn't.  In the end I decided to leave as is, Since I want to move on and get to playing the games.
       

       
      And the Pair

      Thanks for any C&C you give.
    • By Silvervane
      Finally getting back to painting a bit more consistently and finishing things.  Here is one I finished recently, Theo from Zombicide: Wolfsburg.  I'm multi-tasking him to also serve as the ranger for my ranger's of shadowdeep warband.  Hoping to have my warband finished by the end of the month.
       
      Theo

      Thanks in advance for and C&C you give.
    • By silentoutsidr
      Hi Everyone,

      This is my first time sharing my miniatures step by step, and excited to do so. Hopefully I can learn some things and everyone else who views the thread will learn a bit too.
      I have been looking forward to the Starcadia board game and especially painting the minis that come with it. So first up is the Weeble alien monster. I picked it for 2 reasons, 1 because it was a simple model and I wanted to try my hand at the big eye. There are 4 total Weeble models and it took about 4-5 hours to get to the point in the last photo. I decided to mimic the illustration that came on the Weeble card in the game, so I am using a similar color scheme.

      First step was prepping the model, and removing the mold lines. 2 of the 4 models had 2 bad areas on their left fin that left gaps and a rough spot. To fix it, I tried a new method, I put a little varnish on each area. If you haven't tried it, I definitely recommend it for small gaps or trouble areas that need filled or smoothed. I put a small dab on, let it dry and done, no need to pull out the putty.

      2nd step was priming. I don't like the spray can so I use gesso. It might take a little longer, but no noxious fumes and extra space needed, just brush it on and let it dry. I just spread it thin and quick most of the time, hence the streaking in the picture. The streaking never shows on a finished mini from what I have experienced.

      3 is where the fun began for me, choosing the colors and beginning to paint. My most recent elven minis, I started experimenting with different ways to do base coating and time around I am trying a colored base that is different that the final paint layer. I'm trying this out to see if I can reduce a step in my process and still get results I like. After examining the illustration, I settled on a blue-green for the body of the Weeble, and yellow for the eye. I plan on keeping with the warm yellow highlight in the front and the cold blue / purple shadow in the back. Once I decided that, I chose my basing colors, of a dark yellow brown for the front and dark blue purple for the back.

      4 with the base shadows on the model, I started working from dark to light. I mixed up a glaze of a medium green and medium purple blue. I gradually worked up the colors with multiple layers making sure to blend the colors together where the transition occurred between them. I left the eye alone, because the dark yellow brown was perfect for the yellow eye.

      5 once I was happy with the dark colors, I moved on to my mid-tones. I mixed up glazes of yellow green for the warm light and a blue green for the cold light. I took my time on this step again applying the glazes in layers to build up the color. I decided to try reflected / bounce lighting on the model, so I applied the blue green more on top of the model and the yellow green more on the bottom. I imagine the lighting being blue white (like a daylight bulb) which results a warmer reflected light in the areas not directly hit by the blue light.

      6 after a while I moved on to the eye. I continued with painting dark to light, so I chose an orange brown for the light area and the same yellow brown and dark blue purple for the shadowed area. Again I gradually applied the glazes and blended them together.

      Overall I am pleased with the direction it is going, and it is still far from done. I having gotten to the brightest highlights or even attempted the mouth yet. After that will be the finishing touches, the green slime, and scaly lumps. In the illustration the lumps are black but I don't think black will look good, any suggestions? I was also thinking of doing a slime trail, or more drool I've not done something like that before does anyone have any suggestions in the direction? Or should I not do a slime trail or more drool?






    • By Zanderina
      Hello all! I'm working on the blacksting wyvern from bones 4, as you can see from the title. Getting ready to start base coating some color in and noticed an area I'm not sure if it is supposed to be anatomically correct or not filled In from when made. No it does not sit on anything either that they would plug into.
      Any thoughts would be appreciated! 
       
      Happy painting and  stay safe! 
      -Z

    • By Darcstaar
      Well, while I let Devona dry, I’ll switch gears to a mini off the shelf of waiting...
       
      I started Kagunk, Ofre Chieftain a year or two ago.  
       

       
      The plan is for an ice ogre, with blue-gray skin.
  • Who's Online   8 Members, 1 Anonymous, 65 Guests (See full list)

×
×
  • Create New...