Jump to content

Sign in to follow this  
SamuraiJack

Planet of the Apes The miniatures Boardgame

Recommended Posts

1 hour ago, Disciple of Sakura said:

If they offer just the trees for a cheap add on, I might be in for those. I have no other need for this.

 

I too really like the trees, and they appear to offer them separately via their first pledge level ("Reforestation"). However, it appears to be $65 for two trees (plus $15 shipping). Ouch. Did I get that right?

  • Like 2

Share this post


Link to post
Share on other sites
5 minutes ago, Carnacki the Ghost Finder said:

Am I just stupid or does the "all-in" pledge (not early bird) cost five dollars more than the backer's choice pledge plus the reforestation add-on?

 

Yeah, they added the Backer's Choice pledge after people asked for it. Not sure if they messed up the price, or what, but it does come out to cheaper if you do it that way.

  • Like 2

Share this post


Link to post
Share on other sites

Those Savage Ones would make great villagers for Mythic Battles: Pantheon! 

 

Sure wish someone would make some panicked generic fantasy townsfolk. I mean, goblins raiding the fields, right?? :lol:

 

Creator's previous project was cancelled, making this a First Created project. 

Edited by ced1106
  • Like 3

Share this post


Link to post
Share on other sites
28 minutes ago, Hestis said:

 

Yeah, they added the Backer's Choice pledge after people asked for it. Not sure if they messed up the price, or what, but it does come out to cheaper if you do it that way.

 

The main game has three trees plus a bunch of other stuff for $110 bucks.  If you wanted more trees it makes more sense to just get two base games and go bananas with the extra monkeys.

 

The previous project they ran was a staggeringly unsuccessful zombicide clone.

 

I am also wary of Kickstarters with licensed Fox IP (ahem cough prodos AvP...) as just bad luck.

 

Edited by Carnacki the Ghost Finder
  • Like 4

Share this post


Link to post
Share on other sites

They've said today that they plan on lowering the price of the reforestation box. I'm not sure how that's going to work since it would affect the all in price and you can't change a pledge tier once it has backers in it. They have been pretty responsive to questions and concerns however.

 

Here's what they said about the first campaign; "WYSIWYGames launched a KS over last the year to help a game already made to be funded to produce other chapters for this boardgame but the KS had been finaly canceled because the offer didn't match a KS campain. This boardgame had been well sold through retailers instead In France and Belgium."

 

I'm not entirely sure if that means they took the expansions to retail instead of using Kickstarter, or if they're saying the campaign didn't do well because the game was available retail.

Share this post


Link to post
Share on other sites

I've seen a few comments on one of the boardgame groups i'm part of on facebook from people who said they'd played a prototype at a convention and not been impressed with the gameplay, anecdotal but worth keeping in mind that it may not stand up if you intend to back for more that looting the minis

  • Like 1

Share this post


Link to post
Share on other sites

It unfunded yesterday, and continues bleeding backers. A damn shame because I would have loved to get those minis.

Hopefully they'll listen to the constructive comments, cancel now and return in September with a better structured and realistic campaign.

And I hope they won't lose the license in the mean time.

 

$65 for 2 trees? That means the three trees in the WAR box would amount to $90 of the total $110 cost. So a whole game without the trees for $20?

 

Edited by Godfather Punk
  • Like 1

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/heresylab2/charmin-vault-adventurers-dandd-animal-inspired-characters?ref=discovery_category_newest
       
      About
       HeresyLab was born in May 2018 with the intent to create and deliver very high quality resin miniatures for the gamer. In the past 18 months we have run 10 successful Kickstarters and delivered over 45000 miniatures to our backers and customers, even when we had to face some rough circumstances. In a few months we will be sending another 20000 models from last Kickstarter. 
      This project was born after my daughter started playing D&D with her friends and requested me a special miniature for her character. But once done all the friends also wanted one, so we decided to use the main model and with the help of Richard Clark we designed a whole range of models. Now we need your help to make production possible. 
      The campaign is focused to produce 6 to 12 different races based on funding. Models willbe available as sets or single miniatures. This will probably be a one time project and not go on regular sale. We are still debating on it.  Below you will see the available models and they will increase based on funding... 
       
    • By Balgin Stondraeg
      Yedharo/GT Studio, who haven't delivered on their Orc Busts campaign yet (I know that's important for you*) are running a little 2 week campaign for some dwarf miniatures.
       
      Live Link
       
      Now personally I like some of these but, in many cases, there's something slightly off about them. One of the dwarf warriors has a slab-like square beard. The heavily armoured dwarfs with the big shields feel too Wizards of the Coast and not Old Wordy enough for me. It's mostly those helmet designs. Overall they're not a bad bunch 'though. I keep looking at that jumping trollslayer and hearing the song from Singham in my head.
       


















       
      * Personally when it comes to people starting a new kickstarter before delivering on a previous one my opinion depends on who's behind the project. It depends on their reputation. Are they known for being capable of delivering on their promises? Do I know them well? Have I placed orders with them before with satisfactory results etc? Have I had bad customer service experiences with them in the past? If it's Shadows Of Esteren, for example, then I'd probably be all over it. If it were Norba Miniatures then it would probably get a big fat no from me. If it were Titanforge..... I'd seriously have to think about it because their quality is really good but they don't seem to be so good at delivering their kickstarters. So I tend to moderate my opinion on repeat campaigns before delivering on a case by case basis.
    • By Rahz
      https://www.kickstarter.com/projects/dreamforge-games/dreamforge-games-eisenkern-grav-stug
       
      Didn't see this one on the forums yet.  DreamForge is releasing something new following their past production issues.  Neat looking tank.  I've got a bunch of their other stuff, and while I haven't built the big mech yet, the other vehicles and troops were great kits.  Not sure they're going to hit the goal at this rate though. 
    • By Gadgetman!
      https://www.kickstarter.com/projects/1696155462/artificial-incident-book-one?ref=user_menu
       
      About
      Hey folks. How do I pitch this? I guess I can start with a little bit about myself. I've been doing webcomics since the end of 2003. Back then I started a little webcomic I called Yosh!(because I was a total weeb).  Now here we are, 15 years later… and I’m still doing 3 Yosh!comics every week.  There are over 2000 comics on Yosh! Problem is, Yosh!, while fun, isn't the only idea running around in my head waiting for when I feel skilled enough to take on a bigger challenge. There's a bunch of projects I want to do. Almost 3 years ago, I started working on one of those other ideas. That comic series is called Artificial Incident.
      Artificial Incident is a project I fell in love with as soon as I figured out that it already had a known Genre. Yosh! fell into the "Slice of life" category even though very little of it fell into everyday life, but because there really wasn't a better fit for it, it was categorized as that. AI, on the other hand, was RPG Literature, or for the weebs, an Isekai (Yep, 15 years later, still a weeb). 
      Allow me to explain my passion, or skip this paragraph. I love stories that take a person and throws them into a familiar yet alien world.  Stories like The Wizard of Oz, The Lion the Witch and the Wardrobe, and yes, even Captain N the Game Masters (Actually I was more a fan of the Dungeons and Dragons animated series but anyways). I enjoyed these stories because I saw so much potential and a simple connection. Most people can put themselves in the shoes of the person thrust into this strange situation. They can think about what they would do and how they would react. This creates an instant connection to the protagonist of the story. Then there's the shear number of familiar yet different things you can do leading to near limitless potential, while not being so alien that people have trouble understanding it. It's a perfect storm of unique and familiar attributes.
      So, what Is Artificial Incident? It's the story of a character that not only gets pulled into a video game, but has the memories of that character as if they actually lived their life within the game. This caused many of the character's original memories to be overwritten, but not all of them. They're not alone in this game though. The story focuses on the main characters and the mysteries that unfold from the world. This includes everything from the NPCs, to a massive change in the economy and civilizations of the world, to even other Player Characters... from entirely different games.
      What makes AI different from other similar stories? This comic has many unique traits, but the thing that frustrates me the most about many current similar stories is their lack of actually showing why things are the way they are. So many mysteries and concepts are never explored. AI is written to explore these changes and work to discover the reasons behind them rather than just accepting things "just because".  
       
       
       
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/iscreamart/the-complete-holders-for-miniature-painting-by-i-s?ref=discovery
       
      About
      Hello there.We would like to introduce you to our miniature painting holders.From the day I started painting miniatures, I confronted with various things that I considered it needed improvement, as  lighting on the miniature, attaching the miniature to the holder, good grip of the holder, airbrushing multiple miniatures at once, and the most important to feel effortless while painting, which I all applied by creating our painting system, and here it is.
      The Ice Cream:
      This holder is amazing due to its features: 
      light on the miniature for a better vision,automatic back and forward rotation and magnetic head (N 52 magnets).Its size is:14 cm height by 5 cm diameter.
                                                    These are 3D printed prototypes
                                                                     
      The Clamp:
      The clamp head  is designed for a secure hold of your miniature,being able to hold various base sizes from 20 mm up to 60 mm! The clamp has two levels as you can see in the picture.The first level holds between 20 and 40 mm bases and the second level holds from 40 up to 60 mm.As well,it uses  N 52 magnet for fast attaching to any of our holders.The magnetic head makes your miniature attaching easier than ever in just one click sound.. It saves you time and effort with no need of using mounting putty or tacky sticks or any other sticking stuff..
      Who said that the small can't hold the big?
                                                     These are 3D printed prototypes
                                                                      
      The Torch:
      We call this one the torch because put together with the clamp it looks like one. We should not underestimate it, because of its features: with this holder you will experience the truly smooth rotation due to its ball bearings(no friction). You don't need two fingers to rotate it, it will easily move by just a thumb touch. Its size is:10.5 cm Height by 3 cm diameter.
                                                     These are 3D printed prototypes
  • Who's Online   27 Members, 3 Anonymous, 27 Guests (See full list)

×