Jump to content


Recommended Posts

Well, awhile ago I started making some terrain for my Frostgrave Dark Alchemy solo mini campaign.  Longish story....Then squirrels happened.  I then decided not to wait to finish my terrain, and just go with what I had made and not painted.  I'll nether confirm nor deny that I also used Lincoln Logs to make wall to fill out that first board (and there are no picture left to prove it). That round went well.  I then managed to finish up building the hirst arts wizard tower in a ruined form.  Next round went way worse... TPK.  You take 4 character and your wizard or apprentice.  They all got taken out by a series of bad dice rolls.  The bad dice roll continued and I failed all my survival rolls for the characters in that mission.  Well I decided I really wanted to finish this piece so here is a thread showing the before painting it.

 

Here is some shots of built with my now deceased WIzard, who is roughly the same size as Sir Forscale.

Ruind_Tower_01a.jpg.b3e11464218414f2f9c7f71eec81139e.jpg

Ruind_Tower_01b.jpg.c7ed0feaa54c4d6780642cb851603467.jpg

Ruind_Tower_01c.jpg.2b32a2704baad9bc040efca4daf1a6d6.jpg

  • Like 17

Share this post


Link to post
Share on other sites

Ok, well I finally got around to start painting this today.  Which means basically, I got a base coat down.  You'll also notice that the tower breaks down into 3 parts.

Ruind_Tower_02a.jpg.e3943dd7e24359625889c3f5fe4d15e6.jpg

  • Like 9

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Talae
      Clorehaven & the Goblin Grotto, via @Kickstarter https://www.kickstarter.com/projects/printablescenery/clorehaven-and-the-goblin-grotto
       
       
      The picturesque town of Clorehaven  
      A lively tavern, a variety of interesting and useful stores and fine lodgings is all the weary adventurer could ask  for.
      The locals seem polite and friendly. The beautiful stone and wood buildings tell you this small town is prosperous and will someday grow into a much larger city. But under the surface of the town, Clorehaven keeps a dark and foreboding secret.  
      Beneath the neat hedgerows and well-kept homes there lies a sprawling complex of caverns. 
      The deep goblins are a sniveling race of green-skins, plying their trade in the strange flora and fauna they gather from around mysterious pools. 
      Design and build your own medieval buildings using the Clorehaven OpenLOCK system. From simple houses to huge complex structures, anything is possible. 
      Explore the Goblin Grotto using the modular Grotto cavern system. Walls and floors can be combined to create a huge variety of underground caverns or above ground structures. 
      Who knows what’s in store for those above and what lies in the depths below. Clorehaven and the Goblin Grotto - By Printable Scenery - the best 3D printable scenery in all the worlds. 
      All the models from Clorehaven & the Goblin Grotto are delivered as optimized STL files to print on home 3D printers.
      If you take the All-In Pledge, you also receive the free bonus items.   
      Clorehaven Pledge :   Clorehaven is constructed using the OpenLOCK tile system where quality detailed modular and functional buildings can be constructed in any shape and size whilst maintaining the true 1" grid system used for most role playing games. 
      This pledge contains the models to build the Townhouse, Cottage, Homestead, Grand Hostel, Cabin, Tavern, Chalet, Watchtower and Schist Stone Fences.  The Clorehaven Pledge includes the stretch goals labelled Clorehaven.
       As the Kickstarter progresses the free stretch goals will grow and expand Clorehaven from a town into a city.
      Goblin Grotto Pledge:  The free form caverns create natural and expansive cavern maps and tunnel systems quickly and dynamically. The cavern floors are designed to have a comparable 1" grid system for RPG whilst still maintaining the natural rock form.
       PLAY This pledge contains the Moon Effigy, the Goblin Cavern Floors, The Cavern Walls, The Cavern Tunnels, the Cavern Bridge, Rickety Bridges and the Gloom Creeper. The Goblin Grotto Pledgeincludes the stretch goals labelled Goblin Grotto.
       All of our 3D-printable models begin their life as hand drawn concepts. From there we digitally sculpt the models to create high detail STL files. The models are test printed and painted before released so that you know each model from Printable Scenery will print perfectly. 
       Printable Scenery created the OpenLOCK system in 2016. Since then it has become the standard. Its innovative seamless locking system revolutionized dungeon system. Printable Scenery open-sourced the design and it allows for free commercial use to third party designers such as Open Forge.
      The Free Stretch Goals are a big part of our Kickstarters. The more stretch goals we hit, the more models you will get. So join us in this grand adventure and discover the stretch goals beyond.  
       



         The bonus items listed below are free with the All-In Pledge.   
        If you want  an add-on you need to add the amount to your pledge or you can add it in the pledge manager at the end of the campaign.
      Note: If you want to get Add-Ons but not any of the main pledges then you can make a pledge for the amount for the Add-Ons only. To do this: 
      1. Select 'Back this Project'  2. Select '$1 or more -  Add-Ons Only' 3. Enter the amount for the Add-Ons.  Once the campaign closes you will be sent a link to the pledge manager to select the add-ons that you picked.
        Ruined Winterdale II Add-On NZ$30
      Back by popular demand, the Ruined Winterdale II Add-On contains 5 never before ruined buildings. To claim this add-on package you need to add the amount NZ$30 to your pledge or you can add it in the pledge manager at the end of the campaign.
      Dungeon Booster Add-On NZ$50 
      The Dungeon Booster Add-on contains walls and floors that are designed to boost your Rampage dungeon encounters.  To claim this add-on package you need to add the amount NZ$50 to your pledge or you can add it in the pledge manager at the end of the campaign.  
        Previous Kickstarter add-ons are bundled items that have been requested by backers from previous campaigns. 
      Click on the links below to see the list of models that are part of each Add-On.  (eg. the Lost Tribes contains 13 models)
    • By ultrasquid
      I didn't see this listed so:
       
      https://www.kickstarter.com/projects/archonstudio/dungeonsandlasers-plastic-tabletop-rpg-scenery
       
      I received an engineering sample of the product today. They're made of hard gray injection-molded plastic, my guess would be ABS from its hardness and density. The floor and wall ties fit together tightly, though it takes a bit of effort that likely would wear at paint on those surfaces had they been painted. Due to response from earlier sample recipients, the production tiles will be slightly larger than the samples.
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/aus30k/3d-printable-space-elf-buildings?ref=discovery_category_newest
       
      About
      Welcome to our fourth project and one which is a little different to the previous two. While our projects for the resin models will be continuing latter this year and early next, we decided to run a small kickstarter alongside some other projects which we are doing.
      One of the things which our local gaming community has always been big on is the creation of great looking gaming tables and key to that is to have great looking terrain. While there is an abundance of Imperial terrain now available both through various stores and a tremendous amount online, there is often a significant lack of xenos/alien themed terrain to suit the non Imperial factions.
      Sadly terrain is also one of the more expensive things to ship internationally and so has always been a hurdle for many players and groups. With the growing popularity of 3D printers and prevalence of print hubs scattered around the world these hurdles are starting to break down.
      With this project we hope to provide people with some nicely detailed buildings with a strong Space Elf feel. The buildings are quite large and should provide both lines of sight blocking terrain and areas for more mobile units to land on higher ground. The pledge rewards are for the STL files themselves to allow you to go and print your own, there are no physical rewards, however if you need help finding a print hub to get your files printed, we will certainly try and help you with that as well.
      There are three buildings in total, backers pledge for one (AU$15), two (AU$30) or all three (AU$40) buildings. The rewards are for personal printing, not commercial or distribution.
      Exiled Space Elf Compound
      Shrine of the Brilliant Lance
      Shrine of the Soaring Eagle
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/mysticrealm/mystic-realms-qcs-quick-cave-system-3d-tabletop-terrain?ref=discovery_category_newest
       
      About
      Mystic-Realm's Quick Cave & Cavern System
      In this campaign we deliver to you a stand alone wall-less terrain system that will work with the terrain you already have.
      QCS terrain is designed to get the tabletop adventure assembled quickly! Each chamber ranges in size all the way up to nearly 8 inches x 8 inches.  Lay down one chamber sections [encounter] at a time as your players progressing though the adventure [fog of war style] or pre build the entire adventure with a quickness. 
      The wall-less design and large pieces make for easy painting, easy transport and playable in any direction.   Playable in any direction? YES! Aside from being able to play off any edge each chamber is double sided! 
      This Kickstarter will include the Base System set 1, Stalagmites set 1, Pools set 1 and the 6 pieces Junctions set 1.  For stretch goals the QCS will expand to include - Twist & Turns set 1 and Bridges set 1.  Each set includes 4 double side themed chamber pieces.  Printing two of each double sided chamber will give you 8 unique playable chambers for each set.  So each set is pretty big and provided more than enough encounters for an evening adventure.
        QCS Base System
      QCS Stalagmites 
        QCS Pools 
      Junctions Accessories
      Stretch Goal LOCKED QCS: Twist & Turns 
      [UNLOCKED]
         
    • By SamuraiJack
      https://www.kickstarter.com/projects/lorazam/apocalypse-fortress-3d-printable-fortification-and-terrain?ref=discovery_category_newest
       
      About
      From the calm arid deserts, we move on to a new more dramatic scenery. Worlds engaged in prolonged sieges and defensive endeavors have developed unique fortifications and barriers to block the enemies advance or break them entirely. 
      Bunkers, Forts, Walls and classic defensive material are the theme of this grim campaign. Looking at the diverse range of uniquely designed defensive structures you might find yourself familiar with a few of the designs. 
      Spreading the word and sharing the Campaign's Web-Link will result in more content for each of you, but more about that in the Stretchgoal section down below.
      We also greatly improved our file delivery system (more about that at the bottom).
      The Full Pledge Level already gives you access to all models of this Kickstarter including all reached Stretchgoals. Additionally, to the 6 Buildings, the Fortress Walls and the modular Trench System below, much more content will be unlocked through the Stretchgoals.
       -> Pictures of actual Print-Outs near the bottom of the page!
      Command Center Infantry Command The Fortress with Modular Wall System The Fortress with Modular Wall System The Fortress with Modular Wall System (pitched roofs are optional) Gun Emplacements Modular Fortified Trench System Modular Fortified Trench System Pillbox Infantry Bunker 2 Watchtower
  • Who's Online   52 Members, 2 Anonymous, 194 Guests (See full list)

×