Jump to content
Sign in to follow this  
Darsc Zacal

Amazons and Dwarves by Bad Squiddo Games

Recommended Posts

The Kickstarter is now Live:

https://www.kickstarter.com/projects/badsquiddogames/amazons-and-dwarves-quality-28mm-female-miniatures

-

A871AA63-F348-49C7-A522-676B30395E6A.jpeg.afc1fc008e65f947408f57199a231750.jpeg

B69DBB8B-8B3A-42C7-9AD3-68F4512B5120.jpeg.34e8b1ae6d26270c1e859239484977d7.jpeg

 

I backed one of Annie’s previous kickstarters, the one with all the forest animals including beavers and moose and bears (oh my).

I also bought several of her female minis and the sculpts are quite nice and the castings were great quality. Very sharp and clean. I’m very happy with what I’ve ordered and if finances allowed I would back again.

 

Edited by Darsc Zacal
  • Like 9
  • Thanks 1

Share this post


Link to post
Share on other sites

I've had a couple of her ks and was happy with both. One was also super quick. One-ish person operation so things can get bogged down, but never stops communication.

Share this post


Link to post
Share on other sites

No fair!   

 

I was trying to save a little money this month, and now this...   

(I need to buy some more shelving to store more minis, and that costs money.)

  • Like 1
  • Haha 1

Share this post


Link to post
Share on other sites

It's about time I joined! Thank you so much for sharing the Kickstarter, and good to see such great feedback!

It's exciting!

 

We unlocked Norbert the pony earlier too! :D

  • Like 11

Share this post


Link to post
Share on other sites
2 hours ago, Annie said:

It's about time I joined! Thank you so much for sharing the Kickstarter, and good to see such great feedback!

It's exciting!

 

We unlocked Norbert the pony earlier too! :D

 

Good to see you here, Annie.

Share this post


Link to post
Share on other sites

I'm backing this one - only have good things to say about the samurai kickstarter. Distinctive models, good quality, realistic scope (ie not thousands of stretch goals) and great turnaround and delivery. Plus sweets, teabags, badges and Guinea pigs. 

  • Like 2

Share this post


Link to post
Share on other sites

I've backed this.

 

I backed three previous KSs ("My Last Sunrise - Gothic Horror 28mm Miniatures", "Freyja's Wrath: Dark Age & Fantasy 28mm Shieldmaidens" and "Onna-bugeisha and the Women of Feudal Japan").  Annie has been good at communicating with the backers, especially when there are delays.  (Freyja's Wrath was delayed due to reasons beyond her control and she was always communicative and kept us backers up-to-date.  Many KS project teams could learn from her example.)

  • Like 2

Share this post


Link to post
Share on other sites

https://www.kickstarter.com/projects/badsquiddogames/amazons-and-dwarves-quality-28mm-female-miniatures

Apologies for the quiet, I've been working at UK Games EXPO in Birmingham, 3 days of super hard work.

There's one more day left, I'm typing this from the hotel before I head back there for the final day, so if you're there and haven't come over yet, here's the map, we're on Sarissa Precision's stand.

D7463qGWsAI9B0n.jpg

So since the last update.....

We unlocked Norbert!
D71VtDiXkAAHbox.jpg

So he's automatically added to the All-in pledges (and two for the....two of everything pledge) and anyone else can add him for £8. He's a delightful little scamp, with his garlic, beers, sleeping bag, cardigan, keg.....

THEN!

...THEN!
We unlocked STICKERS!

More Martin Whitmore delights!
D8CNSG7XsAE0oYe.jpg

If you want any extra, just increase your pledge by £1 (and in the pledge manager you can let us know which ones you want)
AND THEN.............

(I know, I meant to update last night and the night before, but I pretty much fell into the hotel bed)

PEEGASUS!

IT'S HAPPENING!

PEEGASUS!

D8CNshtW4AIxZUM.jpg

Same with the others, if you're not in an all in pledge you can add these for £8 by clicking the "manage your pledge" button. Or if you are in Pledge #4 or #5 and want.....more.... you can add them the same way. Everyone needs more, they're the best thing to ever grace the tabletop world. Not biased of course.

I've been showing everyone at Expo my lil inked peegasus, it's amazing. Many excite!

WHAT'S NEXT?

The peeg sprite that comes with Thea, Amazon captain, will be added to pledges. Starting at #4 and #5 for the £12,000 mark, but subsequent stretches will roll out to basically everyone getting one. These can't be bought as add ons and will only be available post Kickstarter in the pack with Thea.

I had a cast out at the Bad Squiddo Beers meet up and the "awwwwwwwwwwwww" was immense. So smol! And with such a dinky lil rider! Eeeee!
D8CN5MqX4AAIdAR.jpg

Then.... we have another stretch goal.

You will be able to see it before the campaign ends, it's being sculpted right now......

It has an Amazon AND a Dwarf in it! More info to come on that, but it is going to be....hamazing.

INTERACTIVE STUFFS

I did a little impromptu live video on Facebook the other day just showing off some casts and inking them up so you can see the detail better. There's some cool backstory on Norbert that emerges!

https://www.facebook.com/TheDiceBagLady/videos/303294043879685/

In the coming week I'll be doing more live/interactive videos, such as painting some peegasus. I might try Kickstarter LIVE, even though it's been pretty terrible before, I think it was mostly the fault of the connection at my old place. I reckon we meet at KS Live, then if it all goes to pot we can jump over to Kickstarter. Good plan? I'll let you know in advance, it'll be an evening in UK time, and you'll be able to catch it later on too in case you miss it.

Once I'm back from the EXPO I'll be back on more regular updates and show offs and posts and all that! It's just been super hard as I've been glued to the stand.

Apart from Bad Squiddo beers, our annual meet up, which was a hoot as always! The place was super crowded and we couldn't fit everyone in shot, but here's a chunk!
D8COQREW4AA79R2.jpg

I was passing around a load of master casts, and THEY ALL CAME BACK! HOORAY! And nobody dropped the tiny sprite!

Right I better get up and off to this EXPO.

See you soon, and keep telling your friends!

Annie

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Clearman
      https://www.kickstarter.com/projects/printablescenery/brave-new-worlds
       
      Printable Scenery does great terrain sets.
       
       

       

       

       
       
    • By Mckenna35
      https://www.kickstarter.com/projects/1665755336/plinths-and-display-stands-for-figures-miniatures-and-busts
       
      About
      Welcome to my Kickstarter!
      My name is Mark Norton, and I am working full-time as a sculptor going by the name Frozen Ninja 3D. I am designing and sculpting my own line of highly detailed figures with the hopes of bringing people together for fun hobby times.  Please visit the bottom of this page for examples of my work, and to see the quality I am trying to achieve.
      This is the fourth Kickstarter project that I have run, and the third project that features models entirely designed and sculpted by me. 
      What is being offered in this project?
      The goal of this project is to release an entire line of high quality plinths and display stands.  These plinths make any figure or bust stand out among the rest, and will make an exciting addition to any collection.   In addition, these plinths will help bring your competition entries to that next level.
      FIRST - MEDIUM SIZE PLINTHS - $12 each, or cheaper if you get a "Bundle" Pledge.
      To start the project, I am offering Medium size Plinths.  The top of the Medium plinth is approximately 35mm across, which is ideal for most miniatures, and busts look awesome on them as well.  These plinths are about 44mm Tall, with base sizes ranging from 42mm to 49mm.   Each plinth will be supplied unpainted.
      In addition to Medium Size Plinths, I have Large Size Plinths planned as stretch goals, as well as some other fun sizes.  
      I have a lot of great models planned for this project!  Here is the starting lineup (scroll down further to see the stretch goals that are planned...)
      Add-On List
      Here is a list of all of the plinths that are currently available in this Kickstarter project.  I will continue to update this list as stretch goals are reached.
      Shipping will be charged separately, please refer to the shipping chart below for rates.
      Stretch Goals
      These are the plinths that will be available once we hit certain funding levels.
      The First Stretch Goal is titled "Chains".  The Medium Plinth will be unlocked if we can reach $1,800 in funding.  It will be available as an Add-On for $12.
    • By SamuraiJack
      https://www.kickstarter.com/projects/m3dm/aquatic-collection-3d-printable-sculptures?ref=discovery_category_newest
       
      Story
      Hello everyone!
      This collection of models is all aquatic themed. There are minis, monsters, and scatter terrain. There are 12 models in the cores set, and 18 stretch goals planned. That is up to 30 models with a buy-all price of $6. Times are tough right now, so I wanted to make something affordable that is still just as awesome.
       MODEL OPTIONS 
      All models come with a no base, simple base, and decorative base option. A $10 pledge gets you all 3 versions in addition to the successfully tested resin pre-supported version.
         THE CORE SET 
                              THE STRETCH GOALS
      Every $500 is a new mini, monster, or piece of scatter terrain. All mounts will have a saddle and no saddle version. More stretch goals will be added to match the funding level. So feel free to leave comments about what else you'd like to see!
         
    • By Knight of the Dinner Table
      https://www.kickstarter.com/projects/cmon/cmon-time-machine/description
       
      Me personally I'm more or less done with CMON. No way I'm spending more than $1 here, but some of you might be interested or some might find the comment section entertaining.
    • By Clearman
      https://www.kickstarter.com/projects/unchartedrealms/uncharted-realms-lords-of-shadow
       
      Next Kickstarter form Antimatter Games.
       

  • Who's Online   19 Members, 1 Anonymous, 29 Guests (See full list)

×
×
  • Create New...