Jump to content

Sign in to follow this  
paintybeard

Artemis 2.0 By Kev White

Recommended Posts

A new kickstarter project from Kev White:

 

 https://www.kickstarter.com/projects/hasslefriesian/artemis-20/description

 

Don't think I shall be backing this myself as I don't do much that is bigger than 54mm.

 

This seems to be happening off Kev's own bat and I don't think Hasslefree is involved. Whether that is a good thing or not I leave to your own judgement.

  • Like 3

Share this post


Link to post
Share on other sites

Well I like the figure, but don't know about the nude version... I'll wait to see if this get closed to the SG cause I think she will look great in armor!

And I find it a little expensive for a single figure :/

Share this post


Link to post
Share on other sites

While I probably shouldn't considering my 40mm version is just gathering dust unpainted, I'm willing to pledge and see if some armor gets unlocked.

  • Like 1

Share this post


Link to post
Share on other sites

I'm not interested in the nude version(no, I'm not sick or anything... ) so I'm going to just hang around(€1) and wait to see if he produces a nice armored version. 

Share this post


Link to post
Share on other sites

The 40mm is a beautifully sculpted miniature I would have had no use for.  The 75mm is a beautifully sculpted miniature that I have no use for.  If the armored one gets made and is fully clothed and has a spear it would be a fantastic Athena statue in games and setups, but I expect it with still show a little to much for a Athena proxy.  If the actual representation of the Greek goddess Artemis gets done it would also be useful in games and setups.

 

I hope this KS is successful for no other reason than I like to see artists push their talents, but I really do not have the space or money for resin sculpts so my opinion should not really influence Kev's sculpts.

  • Like 1

Share this post


Link to post
Share on other sites

The armored version is funded and almost complete already. There will be a (likely hellenic) draped classical version, if it funds (it's close).

There are reasons besides gaming to enjoy sculpture. I'm happy he's making this one, given how much of the industry has been hamstringed by the needs of gamers (until the last few years, anyway).

Share this post


Link to post
Share on other sites

Four different versions in progress now; clothed and nude variously armed with sword, spear and bow.

 

Five days to go, I think I will weaken enough to get the "huntress Diana" model.

Share this post


Link to post
Share on other sites

I like his sculpting but dude messed up one figure from the last KS and despite the repeated tellings of "yeah, we'll fix it", it hasn't been fixed so hard pass. Your customer service is your legacy for good and ill.

  • Like 1

Share this post


Link to post
Share on other sites

Never again after the mess that is STILL his first Kickstarter.

  • Like 2

Share this post


Link to post
Share on other sites
1 hour ago, skippen said:

Never again after the mess that is STILL his first Kickstarter.

 

No, as he makes very clear if you read the Campaign page; he only supplied sculpts for Hasslefree, he had nothing to do with how the kickstarter was run. And Hasslefree has no part in this project.

Share this post


Link to post
Share on other sites

"

A number of reasons. 
1. Larger scale miniatures don't tend to do well for us, but this sculpt was just lying around and I felt bad that no one would ever be likely to be able to buy it. 
2. There is a huge backlog of unreleased miniatures already on the production schedule at HF. This little lady is about two years behind the front of the queue and she gets pushed back every time I make something that we know will sell better. 
3. This sculpt was a pet project. I don't see why HF should have to pay for things I haven't been asked to make."

 

Kev is hasslefree so not sure what point you're trying to make. He's doing it independently from the company for numerous reasons but it's the same guy.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Darsc Zacal
      Link to the kickstarter:
      https://www.kickstarter.com/projects/bombshellminis/bombshell-babes-4-female-miniatures
      -

       
    • By Gadgetman!
      A bit late, as there's only 21Hours left at this time, but...
       
      https://www.indiegogo.com/projects/lumir-k-the-one-and-only-cooking-oil-led-lamp/x/10803452#/
       
      I'm at the 'Get 1 Give 1' which means I'm getting one of these weird lamps, and a family without electricity in Cambodia also gets one. 
       
      -----------
       
      Overview Lumir K is a cooking oil powered LED lamp that converts the thermal energy of cooking oil into electricity. ▶Make an Impact- Bring the light to the people living without electricity. ▶1 Lumir K = 100X candlelight ▶Easy to Use-Just placing the lamp over the lit wick will turn the LED light on. ▶Accessible-Olive or canola oil, it doesn't matter what kind of cooking oil is. ▶Instant light-No need of charging or battery ▶Efficient-Consumes the only 5ml of oil for 1 hour of light ▶10-year life span
       
      Small heat energy turns
      the 100 times brighter LED light.

      Less Consumption, Less Emission
       
       

       

      Lumir K converts the small thermal energy of cooking oil into electricity and it turns on the bright LEDs. This amazing lantern will light up where you want and it make an impact on the world where it is needed.
       
       

       
       

       
      From now,
      Cooking oil turns to the power source of your lamp.

       
      Lumir K uses cooking oil to generate electricity.
      Cooking oil is one of the cheapest and familiar ingredients as it is easily found from grocery stores in the city to tiny kiosk shops in a remote area.
      Olive, canola and sunflower oil, it doesn't matter what kind of cooking oil is. Without any batteries or external power supply, only with tiny flame which is as big as candle, Lumir K gives you an instant and 100 times brighter light.
       

       

       
      Lumir K is an easy, accessible and sustainable solution for those who need a light.
      With a goal to light up the world, team Lumir had a successful campaign with our first product, candle powered LED lamp.
      We promised to keep developing solutions for families in the off-grid area and finally came back with Lumir K by improving efficiency and changing fuel as cooking oil.
      Lumir K achieved CE and its core technology is patented. We are happy to share this achievement with you, and we need your support to take one step further.
      Lumir K will brighten up anywhere light needs to touch.
       


      Lumir has been resolving the light shortages and delivering the beauty of light.
      Our journey started from a small but momentous experience during the trip to India, learning that there are so many places around the world suffering from unreliable or no electricity supply.
      Among 1.2 billion who do not have access to electricity, most of them rely on candles or kerosene lamps which is dark, harmful for health and the environment. Using kerosene lamps indoors has the same effect as smoking 40 cigarettes and the cost for fuel takes up even 30% of the household's income.
       
      Instead of unreliable supply,
      Isn't it be possible to maximize the light from a candle or a kerosene lamp?
       
      That was the question that led us to invent Lumir K as an effective solution for the light shortage issue.
      In the case of kerosene lamps, only 10% of the energy from the fuel is used for illuminating because the flame itself is the direct light, and the rest, 90% of the energy is just scattered in the air as a heat. 
      However, Lumir K harnesses the wasted 90% of the heat energy to turn on the LEDs, so it is pretty economical as it provides a brighter light only with a small flame.
       
      LUMIR K can be used anytime and anywhere while solar lamps has a big weather constraints in many areas like Indonesia where the average rainy days are more than 160 days. 
       
      After our first crowdfunding campaign, we became a partner of KOICA, Korean International Cooperation Agency, and Lumir K was piloted in Indonesia.
      Lumir K provides 4.1 times brighter light than kerosene lamps, while its economic effect was also achieved with 80% lower fuel consumption compared to kerosene lamps. It also reduces carbon emissions by about 90%.


       
       
       
    • By Al Capwn
      Didn't see a post on this one and it is in the final 24 hours. It is from Mythic Games, the originators of Mythic Battles series. This one is a bit less serious and more along the lines of Arcadia Quest/MOBA comic-fantasy theme.
       
      It is a skirmish game for 2 or 4 players. Miniatures are on 45mm bases and fall in the 32-45mm range. It appears that the bases are pre-sculpted. If MB:P is any indicator, the quality of the miniatures should be pretty solid as well.
       
      https://www.kickstarter.com/projects/1162110258/super-fantasy-brawl/
       



    • By animesensei
      Dwarven Forge is doing a smaller kickstarter in June.  It's a pseudo sequel to their Caverns Deep line (which was their 6th kickstarter, aka KS6), KS6.66 - Hellscape.  This is different than their 7th Kickstarter - Wildlands which will be outdoor themed (trees and such) in Jan 2020.
       
      Many of you have been asking for smaller Kickstarters that are more digestible. So we're going to try it! We are going to launch a small, two-week KS with a limited scope. Best of all, it's happening very soon -- KS6.66 - Hellscape will launch in late June 2019! As the name implies, the lava-based project will focus on the fiery wasteland the fiends of the Nine Hells inhabit. The collection will consist of a small number of new sculpts as well as some repaints of some Caverns Deep pieces.
       

       

       
      EDIT:  It start on June 16th (Father's Day in the US)
    • By SamuraiJack
      https://www.kickstarter.com/projects/durginpaintforge/the-second-government-of-inneath?ref=discovery_category_newest
       
      About
       [...] In the tragic accident of 2006, the world lost the renowned Professor De Carli, but we did not lose his spiritual heritage. While he gained his fame for being the first to theorise the so-called ‘Scale of happiness’, in the final years of his life, the holistic researcher utterly devoted his body and soul to the study of an equally mysterious phenomenon: ‘The swamp of the second-born'. It is widely known, at least in the creative sphere, that successfully duplicating a piece of work is a very difficult undertaking. Many promising artists, even those who experienced outstanding success with their first piece of work, have found themselves mired with Artax in this deadly swamp. I know, I know, that’s a low blow. However, or so the never-too-late Prof. De Carli expressed in front of the three hundred thousand students of the University of Turin during his celebrated lectio magistralis of 2004, "No road will be inaccessible to those who travel it animated by the fire of passion. No road except Corso Grosseto that is."
      Welcome to this new, crazy campaign by Durgin Paint Forge, mighty backers! We have worked hard over the past years to create a new range of miniatures capable of making your little heart race at a million beats a minute. At long last, here we are, eager to throw ourselves into this new adventure like a lemming on the edge of a cliff! With ‘The Second Government of Inneath’, we want to repeat the wonderful experience of two years ago and, if possible, raise the bar a few notches. Just as with ‘The Iron Crows’, our goal has been to make you fall in love with us and our creations, "The Second Government of Inneath" was born to remind you that, despite the passing of years, in our eyes, you are still as beautiful as the day we met.
      We have a single purpose: to create miniatures that are worthy of great heights. Or, at least metaphorically; in as much as 32mm miniatures can be. If you took part in our previous Kickstarter (the blessing of Grundur be upon you!), you already have proof of how uncompromising we are when it comes to the quality of our products. On the other hand, if this is your first experience with us then you are even luckier! Now we have two more years of creative and technical experience that give us a firm belief that this Kickstarter will be even better than the last.
       PLAY 3d prints! NDT: we strongly believe that humans have different heights. Or at least, this is what I learned when I met a Latvian guy and I seemed like his backpack, comparing our heights. For this reason, our human characters represent individuals with different heights and their miniatures reflect this concept, going approximately from 34 to 41mm size.
      Have I failed to dismiss your doubts? Feel free to write to us at info@durginpaintforge.com if you have any more questions!
      The rules of the game are simple: 20 characters, 5 bundles and a large assortment of stretch goals ready to break into your bundle like a commando behind enemy lines. You will be able to support this project and contribute to the success of this range in three ways: you can select the miniatures you like individually, pounce on the convenient bundles for some bulk savings or, if you have an impassioned heart but only a few doubloons in your pocket, we would greatly appreciate if you could share this project far and wide, to wherever you think people might be interested.
      If you are only interested in some specific miniatures from the range, take a look at the table below, crack out a sheet of paper, a pencil and some rounded-tip scissors. Note down the miniatures that interest you and add up their individual prices. Their total will be the amount that you will need to insert as your pledge amount. After the campaign is completed, we will send out a pledge manager in which you will be able to sort out the details of which miniatures you want. 
        We have 5 bundles available: Bluecoat Bundle, Redcoat Bundle, Arcane Bundle, Mighty Mega Box and Friendly Mega Box! If you are interested in buying a bundle, simply select the appropriate pledge and enjoy the anticipation of that little box of goodies being dropped on your doorstep (if you still have those scissors ready, you could cut out some nice origami to pass the time!).
       "What if I want to buy more bundles? Or add more miniatures to my bundle?"
      Easier than shooting an Elf in a barrel (don't feel bad, he deserves it). Just select the reward you are interested in, then modify your pledge by adding the value of the miniatures or any other bundles you want to add; voila!
  • Who's Online   11 Members, 0 Anonymous, 125 Guests (See full list)

×